target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
   9         model = "Astoria Networks ARV7510PW22";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power;
  17                 led-failsafe = &power;
  18                 led-running = &power;
  19
  20                 led-dsl = &internet;
  21                 led-usb = &umts;
  22                 led-wifi = &wlan;
  23         };
  24
  25         memory@0 {
  26                 reg = <0x0 0x4000000>;
  27         };
  28
  29         gpio-keys-polled {
  30                 compatible = "gpio-keys-polled";
  31                 #address-cells = <1>;
  32                 #size-cells = <0>;
  33                 poll-interval = <100>;
  34
  35                 rfkill {
  36                         label = "rfkill";
  37                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_RFKILL>;
  39                 };
  40                 restart {
  41                         label = "restart";
  42                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_POWER>;
  44                 };
  45                 reset {
  46                         label = "reset";
  47                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
  48                         linux,code = <KEY_RESTART>;
  49                 };
  50         };
  51
  52         gpio-leds {
  53                 compatible = "gpio-leds";
  54                 power: power {
  55                         label = "power";
  56                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  57                         default-state = "keep";
  58                 };
  59                 internet: internet {
  60                         label = "internet";
  61                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  62                 };
  63                 wlan: wlan {
  64                         label = "wlan";
  65                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
  66                 };
  67                 umts: 3g {
  68                         label = "3g";
  69                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  70                 };
  71                 message {
  72                         label = "message";
  73                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  74                 };
  75         };
  76 };
  77
  78 &gpio {
  79         pinctrl-names = "default";
  80         pinctrl-0 = <&state_default>;
  81
  82         state_default: pinmux {
  83                 exin {
  84                         lantiq,groups = "exin1";
  85                         lantiq,function = "exin";
  86                         lantiq,pull = <2>;
  87                         lantiq,output = <0>;
  88                 };
  89                 pci_in {
  90                         lantiq,groups = "req1", "req2";
  91                         lantiq,function = "pci";
  92                         lantiq,open-drain = <1>;
  93                         lantiq,pull = <2>;
  94                         lantiq,output = <0>;
  95                 };
  96                 pci_out {
  97                         lantiq,groups = "gnt1";
  98                         lantiq,function = "pci";
  99                         lantiq,output = <1>;
 100                 };
 101                 pci_rst {
 102                         lantiq,pins = "io21";
 103                         lantiq,pull = <2>;
 104                         lantiq,output = <1>;
 105                 };
 106                 pins_out {
 107                         lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
 108                         lantiq,output = <1>;
 109                 };
 110                 pins_in {
 111                         lantiq,pins = "io11", "io12", "io28";
 112                         lantiq,open-drain = <1>;
 113                         lantiq,pull = <2>;
 114                         lantiq,output = <0>;
 115                 };
 116         };
 117
 118         usb_vbus: regulator-usb-vbus {
 119                 compatible = "regulator-fixed";
 120
 121                 regulator-name = "USB_VBUS";
 122
 123                 regulator-min-microvolt = <5000000>;
 124                 regulator-max-microvolt = <5000000>;
 125
 126                 gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
 127                 enable-active-high;
 128         };
 129 };
 130
 131 &gsw {
 132         /* Switch reset 19 */
 133         phy-mode = "mii";
 134         mtd-mac-address = <&boardconfig 0x16>;
 135 };
 136
 137 &localbus {
 138         nor@0 {
 139                 compatible = "lantiq,nor";
 140                 bank-width = <2>;
 141                 reg = <0 0x0 0x1000000>;
 142                 #address-cells = <1>;
 143                 #size-cells = <1>;
 144
 145                 partitions {
 146                         compatible = "fixed-partitions";
 147                         #address-cells = <1>;
 148                         #size-cells = <1>;
 149
 150                         partition@0 {
 151                                 label = "uboot";
 152                                 reg = <0x00000 0x40000>;
 153                                 read-only;
 154                         };
 155
 156                         partition@40000 {
 157                                 label = "uboot_env";
 158                                 reg = <0x40000 0x20000>;
 159                                 read-only;
 160                         };
 161
 162                         partition@60000 {
 163                                 label = "firmware";
 164                                 reg = <0x60000 0xf80000>;
 165                         };
 166
 167                         boardconfig: partition@fe0000 {
 168                                 label = "board_config";
 169                                 reg = <0xfe0000 0x20000>;
 170                                 read-only;
 171                         };
 172                 };
 173         };
 174 };
 175
 176 &pci0 {
 177         status = "okay";
 178         lantiq,external-clock;
 179         interrupt-map = <
 180                 0x7000 0 0 1 &icu0 30
 181                 0x7800 0 0 1 &icu0 135
 182                 0x7800 0 0 2 &icu0 135
 183                 0x7800 0 0 3 &icu0 135
 184         >;
 185         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 186         req-mask = <0x3>;
 187
 188         wifi@1814,3592 {
 189                 compatible = "pci1814,3592";
 190                 reg = <0x7000 0 0 0 0>;
 191                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 192                 ralink,mtd-eeprom-swap;
 193         };
 194 };
 195
 196 &usb_phy {
 197         status = "okay";
 198 };
 199
 200 &usb {
 201         status = "okay";
 202         vbus-supply = <&usb_vbus>;
 203 };
 204
 205 &vmmc {
 206         status = "okay";
 207         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
 208 };