1 #include <dt-bindings/gpio/gpio.h>
6 compatible = "lantiq,xway", "lantiq,vr9";
13 stdout-path = "serial0:115200n8";
21 compatible = "mips,mips34Kc";
27 compatible = "lantiq,cputemp";
31 compatible = "syscon-reboot";
41 compatible = "lantiq,biu", "simple-bus";
42 reg = <0x1f800000 0x800000>;
43 ranges = <0x0 0x1f800000 0x7fffff>;
46 #interrupt-cells = <1>;
48 compatible = "lantiq,icu";
57 compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
67 compatible = "lantiq,sram", "simple-bus";
68 reg = <0x1f000000 0x800000>;
69 ranges = <0x0 0x1f000000 0x7fffff>;
72 #interrupt-cells = <1>;
74 compatible = "lantiq,eiu-xway";
75 reg = <0x101000 0x1000>;
76 interrupt-parent = <&icu0>;
77 lantiq,eiu-irqs = <166 135 66 40 41 42>;
81 compatible = "lantiq,pmu-xway";
82 reg = <0x102000 0x1000>;
86 compatible = "lantiq,cgu-xway";
87 reg = <0x103000 0x1000>;
91 compatible = "lantiq,dcdc-xrx200";
92 reg = <0x106a00 0x200>;
97 compatible = "lantiq,vmmc-xway";
98 reg = <0x107000 0x300>;
99 interrupt-parent = <&icu0>;
100 interrupts = <150 151 152 153 154 155>;
104 #address-cells = <1>;
106 compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
107 reg = <0x203000 0x100>;
108 ranges = <0x0 0x203000 0x100>;
112 compatible = "lantiq,xrx200-gphy";
115 resets = <&reset0 31 30>, <&reset1 7 7>;
116 reset-names = "gphy", "gphy2";
120 compatible = "lantiq,xrx200-gphy";
123 resets = <&reset0 29 28>, <&reset1 6 6>;
124 reset-names = "gphy", "gphy2";
127 reset0: reset-controller@10 {
128 compatible = "lantiq,xrx200-reset";
129 reg = <0x10 4>, <0x14 4>;
134 reset1: reset-controller@48 {
135 compatible = "lantiq,xrx200-reset";
136 reg = <0x48 4>, <0x24 4>;
141 usb_phy0: usb2-phy@18 {
142 compatible = "lantiq,xrx200-usb2-phy";
143 reg = <0x18 4>, <0x38 4>;
146 resets = <&reset1 4 4>, <&reset0 4 4>;
147 reset-names = "phy", "ctrl";
151 usb_phy1: usb2-phy@34 {
152 compatible = "lantiq,xrx200-usb2-phy";
153 reg = <0x34 4>, <0x3c 4>;
156 resets = <&reset1 5 5>, <&reset0 4 4>;
157 reset-names = "phy", "ctrl";
164 compatible = "lantiq,xrx200-fpi", "simple-bus";
165 ranges = <0x0 0x10000000 0xf000000>;
166 reg = <0x1f400000 0x1000>,
167 <0x10000000 0xf000000>;
169 offset-endianness = <0x4c>;
170 #address-cells = <1>;
173 localbus: localbus@0 {
174 #address-cells = <2>;
176 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
177 1 0 0x4000000 0x4000010>; /* addsel1 */
178 compatible = "lantiq,localbus", "simple-bus";
182 compatible = "lantiq,gptu-xway";
183 reg = <0xe100a00 0x100>;
184 interrupt-parent = <&icu0>;
185 interrupts = <126 127 128 129 130 131>;
189 compatible = "lantiq,usif";
190 reg = <0xda00000 0x1000000>;
191 interrupt-parent = <&icu0>;
192 interrupts = <29 125 107 108 109 110>;
197 compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
198 reg = <0xe100800 0x100>;
199 interrupt-parent = <&icu0>;
200 interrupts = <22 23 24>;
201 interrupt-names = "spi_rx", "spi_tx", "spi_err",
203 #address-cells = <1>;
205 pinctrl-names = "default";
206 pinctrl-0 = <&spi_pins>, <&spi_cs4_pins>;
210 gpio: pinmux@e100b10 {
211 compatible = "lantiq,xrx200-pinctrl";
214 reg = <0xe100b10 0xa0>;
218 lantiq,groups = "mdio";
219 lantiq,function = "mdio";
225 lantiq,groups = "nand cle", "nand ale",
227 lantiq,function = "ebu";
229 lantiq,open-drain = <0>;
233 lantiq,groups = "nand rdy";
234 lantiq,function = "ebu";
240 nand_cs1_pins: nand-cs1 {
242 lantiq,groups = "nand cs1";
243 lantiq,function = "ebu";
244 lantiq,open-drain = <0>;
251 lantiq,groups = "spi_di";
252 lantiq,function = "spi";
255 lantiq,groups = "spi_do", "spi_clk";
256 lantiq,function = "spi";
261 spi_cs4_pins: spi-cs4 {
263 lantiq,groups = "spi_cs4";
264 lantiq,function = "spi";
272 compatible = "lantiq,gpio-stp-xway";
273 reg = <0xe100bb0 0x40>;
277 lantiq,shadow = <0xffffff>;
278 lantiq,groups = <0x7>;
284 asc1: serial@e100c00 {
285 compatible = "lantiq,asc";
286 reg = <0xe100c00 0x400>;
287 interrupt-parent = <&icu0>;
288 interrupts = <112 113 114>;
292 compatible = "lantiq,deu-xrx200";
293 reg = <0xe103100 0xf00>;
297 compatible = "lantiq,dma-xway";
298 reg = <0xe104100 0x800>;
302 compatible = "lantiq,ebu-xway";
303 reg = <0xe105300 0x100>;
308 compatible = "lantiq,xrx200-usb";
309 reg = <0xe101000 0x1000
311 interrupt-parent = <&icu0>;
312 interrupts = <62 91>;
315 phy-names = "usb2-phy";
320 compatible = "lantiq,xrx200-usb";
321 reg = <0xe106000 0x1000>;
322 interrupt-parent = <&icu0>;
326 phy-names = "usb2-phy";
330 #address-cells = <1>;
332 compatible = "lantiq,xrx200-net";
333 reg = < 0xe108000 0x3000 /* switch */
334 0xe10b100 0x70 /* mdio */
335 0xe10b1d8 0x30 /* mii */
336 0xe10b308 0x30 /* pmac */
338 interrupt-parent = <&icu0>;
339 interrupts = <75 73 72>;
340 resets = <&reset0 21 16>, <&reset0 8 8>;
341 reset-names = "switch", "ppe";
342 lantiq,phys = <&gphy0>, <&gphy1>;
343 pinctrl-0 = <&mdio_pins>;
344 pinctrl-names = "default";
348 compatible = "lantiq,mei-xrx200";
349 reg = <0xe116000 0x9c>;
350 interrupt-parent = <&icu0>;
355 compatible = "lantiq,ppe-xrx200";
356 reg = <0xe234000 0x3ffd>;
357 interrupt-parent = <&icu0>;
359 resets = <&reset0 3 3>, <&reset0 11 11>, <&reset0 23 23>;
360 reset-names = "dsp", "dfe", "tc";
363 pcie0: pcie@d900000 {
364 compatible = "lantiq,pcie-xrx200";
366 #interrupt-cells = <1>;
368 #address-cells = <3>;
370 reg = <0xd900000 0x1000>;
372 interrupt-parent = <&icu0>;
373 interrupts = <161 144>;
377 gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
383 #address-cells = <3>;
385 #interrupt-cells = <1>;
386 compatible = "lantiq,pci-xway";
387 bus-range = <0x0 0x0>;
388 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
389 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
390 reg = <0x7000000 0x8000 /* config space */
391 0xe105400 0x400>; /* pci bridge */
392 lantiq,bus-clock = <33333333>;
393 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
394 interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
395 req-mask = <0x1>; /* GNT1 */
400 compatible = "lantiq,vdsl-vrx200";