target/linux/lantiq/files/arch/mips/boot/dts/danube.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,danube";
   7
   8         aliases {
   9                 serial0 = &asc1;
  10         };
  11
  12         chosen {
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         cpus {
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19
  20                 cpu@0 {
  21                         compatible = "mips,mips24Kc";
  22                         reg = <0>;
  23                 };
  24         };
  25
  26         reboot {
  27                 compatible = "syscon-reboot";
  28
  29                 regmap = <&rcu0>;
  30                 offset = <0x10>;
  31                 mask = <0x40000000>;
  32         };
  33
  34         biu@1f800000 {
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37                 compatible = "lantiq,biu", "simple-bus";
  38                 reg = <0x1f800000 0x800000>;
  39                 ranges = <0x0 0x1f800000 0x7fffff>;
  40
  41                 icu0: icu@80200 {
  42                         #interrupt-cells = <1>;
  43                         interrupt-controller;
  44                         compatible = "lantiq,icu";
  45                         reg = <0x80200 0x28
  46                                 0x80228 0x28
  47                                 0x80250 0x28
  48                                 0x80278 0x28
  49                                 0x802a0 0x28>;
  50                 };
  51
  52                 watchdog@803f0 {
  53                         compatible = "lantiq,wdt";
  54                         reg = <0x803f0 0x10>;
  55                 };
  56         };
  57
  58         sram@1f000000 {
  59                 #address-cells = <1>;
  60                 #size-cells = <1>;
  61                 compatible = "lantiq,sram", "simple-bus";
  62                 reg = <0x1f000000 0x800000>;
  63                 ranges = <0x0 0x1f000000 0x7fffff>;
  64
  65                 eiu0: eiu@101000 {
  66                         #interrupt-cells = <1>;
  67                         interrupt-controller;
  68                         compatible = "lantiq,eiu-xway";
  69                         reg = <0x101000 0x1000>;
  70                         interrupt-parent = <&icu0>;
  71                         lantiq,eiu-irqs = <166 135 66>;
  72                 };
  73
  74                 pmu0: pmu@102000 {
  75                         compatible = "lantiq,pmu-xway";
  76                         reg = <0x102000 0x1000>;
  77                 };
  78
  79                 cgu0: cgu@103000 {
  80                         compatible = "lantiq,cgu-xway";
  81                         reg = <0x103000 0x1000>;
  82                         #clock-cells = <1>;
  83                 };
  84
  85                 vmmc: vmmc@107000 {
  86                         status = "disabled";
  87                         compatible = "lantiq,vmmc-xway";
  88                         reg = <0x107000 0x400>;
  89                         interrupt-parent = <&icu0>;
  90                         interrupts = <150 151 152 153 154 155>;
  91                 };
  92
  93                 rcu0: rcu@203000 {
  94                         #address-cells = <1>;
  95                         #size-cells = <1>;
  96                         compatible = "lantiq,danube-rcu", "simple-mfd", "syscon";
  97                         reg = <0x203000 0x1000>;
  98                         ranges = <0x0 0x203000 0x100>;
  99                         big-endian;
 100
 101                         reset: reset-controller@10 {
 102                                 compatible = "lantiq,danube-reset";
 103                                 reg = <0x10 4>, <0x14 4>;
 104
 105                                 #reset-cells = <2>;
 106                         };
 107
 108                         usb_phy: usb2-phy@18 {
 109                                 compatible = "lantiq,danube-usb2-phy";
 110                                 reg = <0x18 4>;
 111                                 status = "disabled";
 112
 113                                 resets = <&reset 4 4>;
 114                                 reset-names = "ctrl";
 115                                 #phy-cells = <0>;
 116                         };
 117                 };
 118         };
 119
 120         fpi@10000000 {
 121                 #address-cells = <1>;
 122                 #size-cells = <1>;
 123                 compatible = "lantiq,fpi", "simple-bus";
 124                 ranges = <0x0 0x10000000 0xeefffff>;
 125                 reg = <0x10000000 0xef00000>;
 126
 127                 localbus: localbus@0 {
 128                         #address-cells = <2>;
 129                         #size-cells = <1>;
 130                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
 131                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 132                         compatible = "lantiq,localbus", "simple-bus";
 133
 134                         gpiomm: gpiomm@1 {
 135                                 compatible = "lantiq,gpio-mm";
 136                                 reg = <1 0x0 0x10 >;
 137                                 #address-cells = <1>;
 138                                 #size-cells = <1>;
 139                                 #gpio-cells = <2>;
 140                                 gpio-controller;
 141                                 status = "disabled";
 142                         };
 143                 };
 144
 145                 gptu@e100a00 {
 146                         compatible = "lantiq,gptu-xway";
 147                         reg = <0xe100a00 0x100>;
 148                         interrupt-parent = <&icu0>;
 149                         interrupts = <126 127 128 129 130 131>;
 150                 };
 151
 152                 gpios: stp@e100bb0 {
 153                         #gpio-cells = <2>;
 154                         compatible = "lantiq,gpio-stp-xway";
 155                         gpio-controller;
 156                         reg = <0xe100bb0 0x40>;
 157                         lantiq,shadow = <0xfff>;
 158                         lantiq,groups = <0x3>;
 159                         status = "disabled";
 160                 };
 161
 162                 asc0: serial@e100400 {
 163                         compatible = "lantiq,asc";
 164                         reg = <0xe100400 0x400>;
 165                         interrupt-parent = <&icu0>;
 166                         interrupts = <104 105 106>;
 167                         status = "disabled";
 168                 };
 169
 170                 gpio: pinmux@e100b10 {
 171                         compatible = "lantiq,danube-pinctrl";
 172                         #gpio-cells = <2>;
 173                         gpio-controller;
 174                         reg = <0xe100b10 0xa0>;
 175                 };
 176
 177                 asc1: serial@e100c00 {
 178                         compatible = "lantiq,asc";
 179                         reg = <0xe100c00 0x400>;
 180                         interrupt-parent = <&icu0>;
 181                         interrupts = <112 113 114>;
 182                 };
 183
 184                 usb: usb@e101000 {
 185                         compatible = "lantiq,danube-usb";
 186                         reg = <0xe101000 0x1000
 187                                 0xe120000 0x3f000>;
 188                         interrupt-parent = <&icu0>;
 189                         interrupts = <62>;
 190                         dr_mode = "host";
 191                         phys = <&usb_phy>;
 192                         phy-names = "usb2-phy";
 193                         status = "disabled";
 194                 };
 195
 196                 deu@e103100 {
 197                         compatible = "lantiq,deu-danube";
 198                         reg = <0xe103100 0xf00>;
 199                 };
 200
 201                 dma0: dma@e104100 {
 202                         compatible = "lantiq,dma-xway";
 203                         reg = <0xe104100 0x800>;
 204                 };
 205
 206                 ebu0: ebu@e105300 {
 207                         compatible = "lantiq,ebu-xway";
 208                         reg = <0xe105300 0x100>;
 209                 };
 210
 211                 mei@e116000 {
 212                         compatible = "lantiq,mei-xway";
 213                         reg = <0xe116000 0x400>;
 214                         interrupt-parent = <&icu0>;
 215                         interrupts = <63>;
 216                 };
 217
 218                 gsw: etop@e180000 {
 219                         compatible = "lantiq,etop-xway";
 220                         reg = <0xe180000 0x40000>;
 221                         interrupt-parent = <&icu0>;
 222                         interrupts = <73 78>;
 223                         mac-address = [ 00 11 22 33 44 55 ];
 224                 };
 225
 226                 ppe@e234000 {
 227                         compatible = "lantiq,ppe-danube";
 228                         reg = <0xe234000 0x40000>;
 229                         interrupt-parent = <&icu0>;
 230                         interrupts = <96>;
 231                 };
 232
 233                 pci0: pci@e105400 {
 234                         status = "disabled";
 235
 236                         #address-cells = <3>;
 237                         #size-cells = <2>;
 238                         #interrupt-cells = <1>;
 239                         compatible = "lantiq,pci-xway";
 240                         bus-range = <0x0 0x0>;
 241                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 242                                   0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
 243                         reg = <0x7000000 0x8000         /* config space */
 244                                 0xe105400 0x400>;       /* pci bridge */
 245                         lantiq,bus-clock = <33333333>;
 246                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 247                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
 248                         req-mask = <0x1>; /* GNT1 */
 249                 };
 250         };
 251
 252         adsl {
 253                 compatible = "lantiq,adsl-danube";
 254         };
 255 };