target/linux/lantiq/files/arch/mips/boot/dts/ar9.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,ar9";
   7
   8         aliases {
   9                 serial0 = &asc1;
  10         };
  11
  12         chosen {
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         cpus {
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19
  20                 cpu@0 {
  21                         compatible = "mips,mips34K";
  22                         reg = <0>;
  23                 };
  24         };
  25
  26         reboot {
  27                 compatible = "syscon-reboot";
  28
  29                 regmap = <&rcu0>;
  30                 offset = <0x10>;
  31                 mask = <0x40000000>;
  32         };
  33
  34         biu@1f800000 {
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37                 compatible = "lantiq,biu", "simple-bus";
  38                 reg = <0x1f800000 0x800000>;
  39                 ranges = <0x0 0x1f800000 0x7fffff>;
  40
  41                 icu0: icu@80200 {
  42                         #interrupt-cells = <1>;
  43                         interrupt-controller;
  44                         compatible = "lantiq,icu";
  45                         reg = <0x80200 0x28
  46                                 0x80228 0x28
  47                                 0x80250 0x28
  48                                 0x80278 0x28
  49                                 0x802a0 0x28>;
  50                 };
  51
  52                 watchdog@803f0 {
  53                         compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
  54                         reg = <0x803f0 0x10>;
  55
  56                         regmap = <&rcu0>;
  57                 };
  58         };
  59
  60         sram@1f000000 {
  61                 #address-cells = <1>;
  62                 #size-cells = <1>;
  63                 compatible = "lantiq,sram", "simple-bus";
  64                 reg = <0x1f000000 0x800000>;
  65                 ranges = <0x0 0x1f000000 0x7fffff>;
  66
  67                 eiu0: eiu@101000 {
  68                         #interrupt-cells = <1>;
  69                         interrupt-controller;
  70                         compatible = "lantiq,eiu-xway";
  71                         reg = <0x101000 0x1000>;
  72                         interrupt-parent = <&icu0>;
  73                         lantiq,eiu-irqs = <166 135 66 40 41 42>;
  74                 };
  75
  76                 pmu0: pmu@102000 {
  77                         compatible = "lantiq,pmu-xway";
  78                         reg = <0x102000 0x1000>;
  79                 };
  80
  81                 cgu0: cgu@103000 {
  82                         compatible = "lantiq,cgu-xway";
  83                         reg = <0x103000 0x1000>;
  84                         #clock-cells = <1>;
  85                 };
  86
  87                 rcu0: rcu@203000 {
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90                         compatible = "lantiq,xrx100-rcu", "simple-mfd", "syscon";
  91                         reg = <0x203000 0x1000>;
  92                         ranges = <0x0 0x203000 0x100>;
  93                         big-endian;
  94
  95                         reset: reset-controller@10 {
  96                                 compatible = "lantiq,xrx100-reset", "lantiq,danube-reset";
  97                                 reg = <0x10 4>, <0x14 4>;
  98
  99                                 #reset-cells = <2>;
 100                         };
 101
 102                         usb_phy0: usb2-phy@18 {
 103                                 compatible = "lantiq,xrx100-usb2-phy";
 104                                 reg = <0x18 4>;
 105                                 status = "disabled";
 106
 107                                 resets = <&reset 4 4>;
 108                                 reset-names = "ctrl";
 109                                 #phy-cells = <0>;
 110                         };
 111
 112                         usb_phy1: usb2-phy@34 {
 113                                 compatible = "lantiq,xrx100-usb2-phy";
 114                                 reg = <0x34 4>;
 115                                 status = "disabled";
 116
 117                                 resets = <&reset 28 28>;
 118                                 reset-names = "ctrl";
 119                                 #phy-cells = <0>;
 120                         };
 121                 };
 122         };
 123
 124         fpi@10000000 {
 125                 #address-cells = <1>;
 126                 #size-cells = <1>;
 127                 compatible = "lantiq,fpi", "simple-bus";
 128                 ranges = <0x0 0x10000000 0xeefffff>;
 129                 reg = <0x10000000 0xef00000>;
 130
 131                 localbus: localbus@0 {
 132                         #address-cells = <2>;
 133                         #size-cells = <1>;
 134                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
 135                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 136                         compatible = "lantiq,localbus", "simple-bus";
 137                 };
 138
 139                 gptu@e100a00 {
 140                         compatible = "lantiq,gptu-xway";
 141                         reg = <0xe100a00 0x100>;
 142                         interrupt-parent = <&icu0>;
 143                         interrupts = <126 127 128 129 130 131>;
 144                 };
 145
 146                 asc0: serial@e100400 {
 147                         compatible = "lantiq,asc";
 148                         reg = <0xe100400 0x400>;
 149                         interrupt-parent = <&icu0>;
 150                         interrupts = <104 105 106>;
 151                         status = "disabled";
 152                 };
 153
 154                 spi: spi@e100800 {
 155                         compatible = "lantiq,xrx100-spi";
 156                         reg = <0xe100800 0x100>;
 157                         interrupt-parent = <&icu0>;
 158                         interrupts = <22 23 24>;
 159                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 160                                         "spi_frm";
 161                         #address-cells = <1>;
 162                         #size-cells = <0>;
 163                         status = "disabled";
 164                 };
 165
 166                 gpio: pinmux@e100b10 {
 167                         compatible = "lantiq,xrx100-pinctrl";
 168                         #gpio-cells = <2>;
 169                         gpio-controller;
 170                         reg = <0xe100b10 0xa0>;
 171                 };
 172
 173                 stp: stp@e100bb0 {
 174                         #gpio-cells = <2>;
 175                         compatible = "lantiq,gpio-stp-xway";
 176                         gpio-controller;
 177                         reg = <0xe100bb0 0x40>;
 178                         status = "disabled";
 179                 };
 180
 181                 asc1: serial@e100c00 {
 182                         compatible = "lantiq,asc";
 183                         reg = <0xe100c00 0x400>;
 184                         interrupt-parent = <&icu0>;
 185                         interrupts = <112 113 114>;
 186                 };
 187
 188                 usb0: usb@e101000 {
 189                         compatible = "lantiq,arx100-usb";
 190                         reg = <0xe101000 0x1000
 191                                 0xe120000 0x3f000>;
 192                         interrupt-parent = <&icu0>;
 193                         interrupts = <62 91>;
 194                         dr_mode = "host";
 195                         phys = <&usb_phy0>;
 196                         phy-names = "usb2-phy";
 197                         status = "disabled";
 198                 };
 199
 200                 usb1: usb@e106000 {
 201                         compatible = "lantiq,arx100-usb";
 202                         reg = <0xe106000 0x1000
 203                                 0xe1e0000 0x3f000>;
 204                         interrupt-parent = <&icu0>;
 205                         interrupts = <91>;
 206                         dr_mode = "host";
 207                         phys = <&usb_phy1>;
 208                         phy-names = "usb2-phy";
 209                         status = "disabled";
 210                 };
 211
 212                 deu@e103100 {
 213                         compatible = "lantiq,deu-arx100";
 214                         reg = <0xe103100 0xf00>;
 215                 };
 216
 217                 dma0: dma@e104100 {
 218                         compatible = "lantiq,dma-xway";
 219                         reg = <0xe104100 0x800>;
 220                 };
 221
 222                 ebu0: ebu@e105300 {
 223                         compatible = "lantiq,ebu-xway";
 224                         reg = <0xe105300 0x100>;
 225                 };
 226
 227                 mei@e116000 {
 228                         compatible = "lantiq,mei-xway";
 229                         reg = <0xe116000 0x9c>;
 230                         interrupt-parent = <&icu0>;
 231                         interrupts = <63>;
 232                 };
 233
 234                 gsw: etop@e180000 {
 235                         compatible = "lantiq,etop-xway";
 236                         reg = <0xe180000 0x40000
 237                                 0xe108000 0x200>;
 238                         interrupt-parent = <&icu0>;
 239                         interrupts = <73 72>;
 240                         mac-address = [ 00 11 22 33 44 55 ];
 241                 };
 242
 243                 ppe@e234000 {
 244                         compatible = "lantiq,ppe-arx100";
 245                         reg = <0xe234000 0x3ffd>;
 246                         interrupt-parent = <&icu0>;
 247                         interrupts = <96>;
 248                 };
 249
 250                 pci0: pci@e105400 {
 251                         status = "disabled";
 252                         #address-cells = <3>;
 253                         #size-cells = <2>;
 254                         #interrupt-cells = <1>;
 255                         compatible = "lantiq,pci-xway";
 256                         bus-range = <0x0 0x0>;
 257                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 258                                   0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
 259                         reg = <0x7000000 0x8000         /* config space */
 260                                 0xe105400 0x400>;       /* pci bridge */
 261                         lantiq,bus-clock = <33333333>;
 262                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 263                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
 264                         req-mask = <0x1>;
 265                 };
 266         };
 267
 268         adsl {
 269                 compatible = "lantiq,adsl-arx100";
 270         };
 271 };