target/linux/lantiq/files/arch/mips/boot/dts/VR200v.dts

   1 /dts-v1/;
   2
   3 #include "VR200.dtsi"
   4
   5 / {
   6         compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9";
   7         model = "TP-LINK Archer VR200v";
   8
   9         chosen {
  10                 bootargs = "console=ttyLTQ0,115200 mem=126M vpe1_load_addr=0x87e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
  11         };
  12
  13         aliases {
  14                 led-boot = &power;
  15                 led-failsafe = &power;
  16                 led-running = &power;
  17                 led-upgrade = &power;
  18
  19                 led-dsl = &dsl;
  20                 led-internet = &internet;
  21                 led-wifi = &wlan5g;
  22
  23                 led-usb = &led_usb;
  24                 led-usb2 = &led_usb;
  25         };
  26
  27         keys {
  28                 compatible = "gpio-keys-polled";
  29                 poll-interval = <100>;
  30                 reset {
  31                         label = "reset";
  32                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_RESTART>;
  34                 };
  35
  36                 wifi {
  37                         label = "wifi";
  38                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  39                         linux,code = <KEY_RFKILL>;
  40                         linux,input-type = <EV_SW>;
  41                 };
  42
  43                 wps {
  44                         label = "wps";
  45                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  46                         linux,code = <KEY_WPS_BUTTON>;
  47                 };
  48
  49                 dect_paging {
  50                         label = "dect_paging";
  51                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
  52                         linux,code = <KEY_PHONE>;
  53                 };
  54         };
  55
  56         leds {
  57                 compatible = "gpio-leds";
  58                 power: power {
  59                         label = "vr200v:blue:power";
  60                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
  61                         default-state = "keep";
  62                 };
  63                 dsl: dsl {
  64                         label = "vr200v:blue:dsl";
  65                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  66                 };
  67                 internet: internet {
  68                         label = "vr200v:blue:internet";
  69                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  70                 };
  71                 led_usb: usb {
  72                         label = "vr200v:blue:usb";
  73                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
  74                 };
  75                 eth {
  76                         label = "vr200v:blue:lan";
  77                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
  78                 };
  79                 wlan {
  80                         label = "vr200v:blue:wlan";
  81                         gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
  82                 };
  83                 wlan5g: wifi {
  84                         label = "vr200v:blue:wlan5g";
  85                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  86                 };
  87                 phone {
  88                         label = "vr200v:blue:phone";
  89                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  90                 };
  91         };
  92 };
  93
  94 &vmmc {
  95         status = "okay";
  96         gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
  97                          &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
  98                          &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
  99 };