target/linux/lantiq/files/arch/mips/boot/dts/VGV7510KW22.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   5
   6 / {
   7         compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9";
   8
   9         chosen {
  10                 bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
  11         };
  12
  13         aliases {
  14                 led-boot = &power_green;
  15                 led-failsafe = &power_red;
  16                 led-running = &power_green;
  17                 led-upgrade = &power_green;
  18
  19                 led-dsl = &dsl;
  20                 led-internet = &internet_green;
  21                 led-wifi = &wifi;
  22         };
  23
  24         memory@0 {
  25                 device_type = "memory";
  26                 reg = <0x0 0x4000000>;
  27         };
  28
  29         gpio-keys-polled {
  30                 compatible = "gpio-keys-polled";
  31                 poll-interval = <100>;
  32
  33                 reset {
  34                         label = "reset";
  35                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_RESTART>;
  37                 };
  38
  39                 wps {
  40                         label = "wps";
  41                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_WPS_BUTTON>;
  43                 };
  44         };
  45
  46         gpio-leds {
  47                 compatible = "gpio-leds";
  48
  49                 dsl: dsl {
  50                         label = "vgv7510kw22:green:dsl";
  51                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 internet_red {
  55                         label = "vgv7510kw22:red:internet";
  56                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 info_red {
  60                         label = "vgv7510kw22:red:info";
  61                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 power_green: power {
  65                         label = "vgv7510kw22:green:power";
  66                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  67                         default-state = "keep";
  68                 };
  69
  70                 info_green {
  71                         label = "vgv7510kw22:green:info";
  72                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 internet_green: internet_green {
  76                         label = "vgv7510kw22:green:internet";
  77                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  78                 };
  79
  80                 wifi: wifi {
  81                         label = "vgv7510kw22:green:wlan";
  82                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  83                 };
  84
  85                 power_red: power2 {
  86                         label = "vgv7510kw22:red:power";
  87                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
  88                 };
  89
  90                 phone {
  91                         label = "vgv7510kw22:green:telefon";
  92                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
  93                 };
  94         };
  95
  96         usb_vbus: regulator-usb-vbus {
  97                 compatible = "regulator-fixed";
  98
  99                 regulator-name = "USB_VBUS";
 100
 101                 regulator-min-microvolt = <5000000>;
 102                 regulator-max-microvolt = <5000000>;
 103
 104                 gpio = <&gpio 47 GPIO_ACTIVE_HIGH>;
 105                 enable-active-high;
 106         };
 107 };
 108
 109 &eth0 {
 110         lan: interface@0 {
 111                 compatible = "lantiq,xrx200-pdi";
 112                 #address-cells = <1>;
 113                 #size-cells = <0>;
 114                 reg = <0>;
 115                 mtd-mac-address = <&boardconfig 0x16>;
 116                 lantiq,switch;
 117
 118                 ethernet@0 {
 119                         compatible = "lantiq,xrx200-pdi-port";
 120                         reg = <0>;
 121                         phy-mode = "mii";
 122                         phy-handle = <&phy1>;
 123                 };
 124                 ethernet@2 {
 125                         compatible = "lantiq,xrx200-pdi-port";
 126                         reg = <2>;
 127                         phy-mode = "mii";
 128                         phy-handle = <&phy11>;
 129                 };
 130                 ethernet@3 {
 131                         compatible = "lantiq,xrx200-pdi-port";
 132                         reg = <3>;
 133                         phy-mode = "mii";
 134                         phy-handle = <&phy12>;
 135                 };
 136                 ethernet@4 {
 137                         compatible = "lantiq,xrx200-pdi-port";
 138                         reg = <4>;
 139                         phy-mode = "mii";
 140                         phy-handle = <&phy13>;
 141                 };
 142                 ethernet@5 {
 143                         compatible = "lantiq,xrx200-pdi-port";
 144                         reg = <5>;
 145                         phy-mode = "mii";
 146                         phy-handle = <&phy14>;
 147                 };
 148         };
 149
 150         mdio {
 151                 #address-cells = <1>;
 152                 #size-cells = <0>;
 153                 compatible = "lantiq,xrx200-mdio";
 154
 155                 phy1: ethernet-phy@1 {
 156                         reg = <0x1>;
 157                         compatible = "ethernet-phy-ieee802.3-c22";
 158                 };
 159
 160                 phy11: ethernet-phy@11 {
 161                         reg = <0x11>;
 162                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 163                 };
 164                 phy12: ethernet-phy@12 {
 165                         reg = <0x12>;
 166                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 167                 };
 168                 phy13: ethernet-phy@13 {
 169                         reg = <0x13>;
 170                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 171                 };
 172                 phy14: ethernet-phy@14 {
 173                         reg = <0x14>;
 174                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 175                 };
 176         };
 177 };
 178
 179 &gphy0 {
 180         lantiq,gphy-mode = <GPHY_MODE_FE>;
 181 };
 182
 183 &gphy1 {
 184         lantiq,gphy-mode = <GPHY_MODE_FE>;
 185 };
 186
 187 &gpio {
 188         pinctrl-names = "default";
 189         pinctrl-0 = <&state_default>;
 190
 191         state_default: pinmux {
 192                 gphy-leds {
 193                         lantiq,groups = "gphy0 led0", "gphy0 led1",
 194                                         "gphy1 led0", "gphy1 led1";
 195                         lantiq,function = "gphy";
 196                         lantiq,open-drain = <0>;
 197                         lantiq,pull = <2>;
 198                         lantiq,output = <1>;
 199                 };
 200                 mdio {
 201                         lantiq,groups = "mdio";
 202                         lantiq,function = "mdio";
 203                 };
 204                 pci-rst {
 205                         lantiq,pins = "io21";
 206                         lantiq,open-drain = <0>;
 207                         lantiq,pull = <0>;
 208                         lantiq,output = <1>;
 209                 };
 210         };
 211 };
 212
 213 &localbus {
 214         nor@0 {
 215                 compatible = "lantiq,nor";
 216                 bank-width = <2>;
 217                 reg = <0 0x0 0x1000000>;
 218
 219                 partitions {
 220                         compatible = "fixed-partitions";
 221                         #address-cells = <1>;
 222                         #size-cells = <1>;
 223
 224                         boardconfig: partition@fe0000 {
 225                                 label = "board_config";
 226                                 reg = <0xfe0000 0x20000>;
 227                                 read-only;
 228                         };
 229                 };
 230         };
 231 };
 232
 233 &pci0 {
 234         status = "okay";
 235         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 236
 237         wifi@1814,3592 {
 238                 compatible = "pci1814,3592";
 239                 reg = <0x7000 0 0 0 0>;
 240                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 241                 ralink,mtd-eeprom-swap;
 242                 mtd-mac-address = <&boardconfig 0x16>;
 243                 mtd-mac-address-increment = <1>;
 244         };
 245 };
 246
 247 &pcie0 {
 248         status = "disabled";
 249 };
 250
 251 &usb_phy0 {
 252         status = "okay";
 253 };
 254
 255 &usb0 {
 256         status = "okay";
 257         vbus-supply = <&usb_vbus>;
 258 };
 259
 260 &vmmc {
 261         status = "okay";
 262         gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
 263                          &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
 264                          &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
 265 };