target/linux/lantiq/files/arch/mips/boot/dts/P2812HNUFX.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   5
   6 / {
   7         compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
   8
   9         chosen {
  10                 bootargs = "console=ttyLTQ0,115200";
  11         };
  12
  13         aliases {
  14                 led-boot = &power_green;
  15                 led-failsafe = &power_red;
  16                 led-running = &power_green;
  17                 led-upgrade = &power_green;
  18
  19                 led-dsl = &dsl_green;
  20                 led-internet = &internet_green;
  21                 led-wifi = &wireless_green;
  22         };
  23
  24         memory@0 {
  25                 device_type = "memory";
  26                 reg = <0x0 0x8000000>;
  27         };
  28
  29         keys {
  30                 compatible = "gpio-keys-polled";
  31                 poll-interval = <100>;
  32
  33                 reset {
  34                         label = "reset";
  35                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_RESTART>;
  37                 };
  38
  39                 rfkill {
  40                         label = "rfkill";
  41                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_RFKILL>;
  43                 };
  44         };
  45
  46         leds {
  47                 compatible = "gpio-leds";
  48
  49                 internet_red {
  50                         label = "p2812hnufx:red:internet";
  51                         gpios = <&stp 16 GPIO_ACTIVE_LOW>;
  52                 };
  53                 internet_green: internet_green {
  54                         label = "p2812hnufx:green:internet";
  55                         gpios = <&stp 17 GPIO_ACTIVE_LOW>;
  56                 };
  57                 dsl_green: dsl_green {
  58                         label = "p2812hnufx:green:dsl";
  59                         gpios = <&stp 18 GPIO_ACTIVE_LOW>;
  60                 };
  61                 dsl_orange {
  62                         label = "p2812hnufx:orange:dsl";
  63                         gpios = <&stp 19 GPIO_ACTIVE_LOW>;
  64                 };
  65                 wireless_orange {
  66                         label = "p2812hnufx:orange:wlan";
  67                         gpios = <&stp 20 GPIO_ACTIVE_LOW>;
  68                 };
  69                 wireless_green: wireless_green {
  70                         label = "p2812hnufx:green:wlan";
  71                         gpios = <&stp 21 GPIO_ACTIVE_LOW>;
  72                 };
  73                 power_red: power {
  74                         label = "p2812hnufx:red:power";
  75                         gpios = <&stp 22 GPIO_ACTIVE_LOW>;
  76                 };
  77                 power_green: power2 {
  78                         label = "p2812hnufx:green:power";
  79                         gpios = <&stp 23 GPIO_ACTIVE_LOW>;
  80                         default-state = "keep";
  81                 };
  82                 phone1 {
  83                         label = "p2812hnufx:green:phone";
  84                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  85                 };
  86                 phone1warn {
  87                         label = "p2812hnufx:orange:phone";
  88                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  89                 };
  90                 phone2warn {
  91                         label = "p2812hnufx:orange:phone2";
  92                         gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
  93                 };
  94                 phone2 {
  95                         label = "p2812hnufx:green:phone2";
  96                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
  97                 };
  98         };
  99
 100         usb_vbus: regulator-usb-vbus {
 101                 compatible = "regulator-fixed";
 102
 103                 regulator-name = "USB_VBUS";
 104
 105                 regulator-min-microvolt = <5000000>;
 106                 regulator-max-microvolt = <5000000>;
 107
 108                 gpio = <&gpio 33 GPIO_ACTIVE_HIGH>;
 109                 enable-active-high;
 110         };
 111 };
 112
 113 &eth0 {
 114         pinctrl-0 = <&mdio_pins>,
 115                     <&gphy0_led0_pins>, <&gphy0_led2_pins>,
 116                     <&gphy1_led1_pins>, <&gphy1_led2_pins>;
 117         pinctrl-names = "default";
 118
 119         lan: interface@0 {
 120                 compatible = "lantiq,xrx200-pdi";
 121                 #address-cells = <1>;
 122                 #size-cells = <0>;
 123                 reg = <0>;
 124                 mac-address = [ 00 11 22 33 44 55 ];
 125                 lantiq,switch;
 126
 127                 ethernet@0 {
 128                         compatible = "lantiq,xrx200-pdi-port";
 129                         reg = <0>;
 130                         phy-mode = "rgmii";
 131                         phy-handle = <&phy0>;
 132                 };
 133                 ethernet@1 {
 134                         compatible = "lantiq,xrx200-pdi-port";
 135                         reg = <1>;
 136                         phy-mode = "rgmii";
 137                         phy-handle = <&phy1>;
 138                 };
 139                 ethernet@2 {
 140                         compatible = "lantiq,xrx200-pdi-port";
 141                         reg = <2>;
 142                         phy-mode = "gmii";
 143                         phy-handle = <&phy11>;
 144                 };
 145                 ethernet@4 {
 146                         compatible = "lantiq,xrx200-pdi-port";
 147                         reg = <4>;
 148                         phy-mode = "gmii";
 149                         phy-handle = <&phy13>;
 150                 };
 151                 ethernet@5 {
 152                         compatible = "lantiq,xrx200-pdi-port";
 153                         reg = <5>;
 154                         phy-mode = "rgmii";
 155                         phy-handle = <&phy5>;
 156                 };
 157         };
 158
 159         mdio {
 160                 #address-cells = <1>;
 161                 #size-cells = <0>;
 162                 compatible = "lantiq,xrx200-mdio";
 163
 164                 phy0: ethernet-phy@0 {
 165                         reg = <0x0>;
 166                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 167                 };
 168                 phy1: ethernet-phy@1 {
 169                         reg = <0x1>;
 170                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 171                 };
 172                 phy5: ethernet-phy@5 {
 173                         reg = <0x5>;
 174                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 175                 };
 176                 phy11: ethernet-phy@11 {
 177                         reg = <0x11>;
 178                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 179                 };
 180                 phy13: ethernet-phy@13 {
 181                         reg = <0x13>;
 182                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 183                 };
 184         };
 185 };
 186
 187 &gphy0 {
 188         lantiq,gphy-mode = <GPHY_MODE_GE>;
 189 };
 190
 191 &gphy1 {
 192         lantiq,gphy-mode = <GPHY_MODE_GE>;
 193 };
 194
 195 &gpio {
 196         pinctrl-names = "default";
 197         pinctrl-0 = <&state_default>;
 198
 199         state_default: pinmux {
 200                 exin3 {
 201                         lantiq,groups = "exin3";
 202                         lantiq,function = "exin";
 203                 };
 204                 stp {
 205                         lantiq,groups = "stp";
 206                         lantiq,function = "stp";
 207                         lantiq,pull = <2>;
 208                         lantiq,open-drain = <0>;
 209                         lantiq,output = <1>;
 210                 };
 211                 pci-in {
 212                         lantiq,groups = "req1";
 213                         lantiq,function = "pci";
 214                         lantiq,output = <0>;
 215                         lantiq,open-drain = <1>;
 216                         lantiq,pull = <2>;
 217                 };
 218                 pci-out {
 219                         lantiq,groups = "gnt1";
 220                         lantiq,function = "pci";
 221                         lantiq,output = <1>;
 222                         lantiq,open-drain = <0>;
 223                         lantiq,pull = <0>;
 224                 };
 225                 pci_rst {
 226                         lantiq,pins = "io21";
 227                         lantiq,output = <1>;
 228                         lantiq,open-drain = <0>;
 229                         lantiq,pull = <2>;
 230                 };
 231                 pcie-rst {
 232                         lantiq,pins = "io38";
 233                         lantiq,pull = <0>;
 234                         lantiq,output = <1>;
 235                 };
 236                 ifxhcd-rst {
 237                         lantiq,pins = "io33";
 238                         lantiq,pull = <0>;
 239                         lantiq,open-drain = <0>;
 240                         lantiq,output = <1>;
 241                 };
 242         };
 243 };
 244
 245 &pci0 {
 246         status = "okay";
 247         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 248 };
 249
 250 &stp {
 251         status = "okay";
 252
 253         lantiq,shadow = <0xffffff>;
 254         lantiq,groups = <0x7>;
 255         lantiq,dsl = <0x0>;
 256         lantiq,phy1 = <0x0>;
 257         lantiq,phy2 = <0x0>;
 258 };
 259
 260 &usb_phy0 {
 261         status = "okay";
 262 };
 263
 264 &usb_phy1 {
 265         status = "okay";
 266 };
 267
 268 &usb0 {
 269         status = "okay";
 270         vbus-supply = <&usb_vbus>;
 271 };
 272
 273 &usb1 {
 274         status = "okay";
 275         vbus-supply = <&usb_vbus>;
 276 };