target/linux/lantiq/files/arch/mips/boot/dts/FRITZ7320.dts

   1 /dts-v1/;
   2
   3 #include "ar9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
   9         model = "AVM FRITZ!Box 7320";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power;
  17                 led-failsafe = &power;
  18                 led-running = &power;
  19                 led-upgrade = &power;
  20
  21                 led-internet = &info_green;
  22                 led-dsl = &power;
  23                 led-wifi = &wlan;
  24         };
  25
  26         memory@0 {
  27                 device_type = "memory";
  28                 reg = <0x0 0x4000000>;
  29         };
  30
  31         gpio-keys-polled {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <100>;
  34
  35                 rfkill {
  36                         label = "rfkill";
  37                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_RFKILL>;
  39                 };
  40                 dect {
  41                         label = "dect";
  42                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_PHONE>;
  44                 };
  45         };
  46
  47         gpio-leds {
  48                 compatible = "gpio-leds";
  49                 power: power {
  50                         label = "fritz7320:green:power";
  51                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  52                         default-state = "keep";
  53                 };
  54                 voice {
  55                         label = "fritz7320:green:fon";
  56                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  57                 };
  58                 dect {
  59                         label = "fritz7320:green:dect";
  60                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  61                 };
  62                 wlan: wlan {
  63                         label = "fritz7320:green:wlan";
  64                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  65                 };
  66                 info_green: info_green {
  67                         label = "fritz7320:green:info";
  68                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
  69                 };
  70                 info_red {
  71                         label = "fritz7320:red:info";
  72                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
  73                 };
  74         };
  75 };
  76
  77 &gpio {
  78         pinctrl-names = "default";
  79         pinctrl-0 = <&state_default>;
  80
  81         state_default: pinmux {
  82                 pci {
  83                         lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
  84                         lantiq,function = "pci";
  85                 };
  86                 pci-in {
  87                         lantiq,groups = "req1", "req2", "req3", "req4";
  88                         lantiq,output = <0>;
  89                         lantiq,open-drain = <1>;
  90                         lantiq,pull = <2>;
  91                 };
  92                 pci-out {
  93                         lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
  94                         lantiq,output = <1>;
  95                         lantiq,pull = <0>;
  96                 };
  97         };
  98 };
  99
 100 &gsw {
 101         phy-mode = "mii";
 102         mtd-mac-address = <&ath9k_cal 0xa91>;
 103         mtd-mac-address-increment = <(-2)>;
 104 };
 105
 106 &localbus {
 107         nor@0 {
 108                 compatible = "lantiq,nor";
 109                 bank-width = <2>;
 110                 reg = <0 0x0 0x1000000>;
 111
 112                 partitions {
 113                         compatible = "fixed-partitions";
 114                         #address-cells = <1>;
 115                         #size-cells = <1>;
 116
 117                         ath9k_cal: partition@0 {
 118                                 label = "urlader";
 119                                 reg = <0x00000 0x20000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@20000 {
 124                                 label = "firmware";
 125                                 reg = <0x20000 0xf60000>;
 126                         };
 127
 128                         partition@f80000 {
 129                                 label = "tffs (1)";
 130                                 reg = <0xf80000 0x40000>;
 131                                 read-only;
 132                         };
 133
 134                         partition@fc0000 {
 135                                 label = "tffs (2)";
 136                                 reg = <0xfc0000 0x40000>;
 137                                 read-only;
 138                         };
 139                 };
 140         };
 141 };
 142
 143 &pci0 {
 144         status = "okay";
 145         req-mask = <0xf>;
 146         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 147
 148         wifi@0,0 {
 149                 compatible = "pci0,0";
 150                 reg = <0x7000 0 0 0 0>;
 151                 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
 152         };
 153 };
 154
 155 &usb_phy0 {
 156         status = "okay";
 157 };
 158
 159 &usb_phy1 {
 160         status = "okay";
 161 };
 162
 163 &usb0 {
 164         status = "okay";
 165 };
 166
 167 &usb1 {
 168         status = "okay";
 169 };