target/linux/lantiq/files/arch/mips/boot/dts/DGN1000B.dts

   1 /dts-v1/;
   2
   3 #include "amazonse.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase";
   9         model = "Netgear DGN1000B";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power;
  17                 led-failsafe = &power;
  18                 led-running = &power;
  19                 led-upgrade = &power;
  20
  21                 led-dsl = &dsl;
  22                 led-internet = &online_green;
  23         };
  24
  25         memory@0 {
  26                 device_type = "memory";
  27                 reg = <0x0 0x1000000>;
  28         };
  29
  30         gpio-keys-polled {
  31                 compatible = "gpio-keys-polled";
  32                 poll-interval = <100>;
  33
  34                 reset {
  35                         label = "reset";
  36                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  37                         linux,code = <KEY_RESTART>;
  38                 };
  39                 rfkill {
  40                         label = "rfkill";
  41                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_RFKILL>;
  43                 };
  44                 wps {
  45                         label = "wps";
  46                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_WPS_BUTTON>;
  48                 };
  49         };
  50
  51         gpio-leds {
  52                 compatible = "gpio-leds";
  53                 dsl: dsl {
  54                         label = "dgn1000b:green:dsl";
  55                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  56                         default-state = "on";
  57                 };
  58                 online_green: online {
  59                         label = "dgn1000b:green:online";
  60                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  61                         default-state = "on";
  62                 };
  63                 online2 {
  64                         label = "dgn1000b:red:online";
  65                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  66                         default-state = "on";
  67                 };
  68                 wps {
  69                         label = "dgn1000b:green:wps";
  70                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  71                         default-state = "on";
  72                 };
  73                 power: power {
  74                         label = "dgn1000b:green:power";
  75                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  76                         default-state = "keep";
  77                 };
  78                 /*
  79                         power red is missing
  80                 */
  81         };
  82 };
  83
  84 &gpio {
  85         pinctrl-names = "default";
  86         pinctrl-0 = <&state_default>;
  87
  88         state_default: pinmux {
  89                 asc {
  90                         lantiq,groups = "asc";
  91                         lantiq,function = "asc";
  92                 };
  93                 keys_in {
  94                         lantiq,pins = "io0",/* "io25", */"io29";
  95                         lantiq,pull = <2>;
  96                         lantiq,open-drain = <1>;
  97                 };
  98         };
  99         pins_spi_default: pins_spi_default {
 100                 spi_in {
 101                         lantiq,groups = "spi_di";
 102                         lantiq,function = "spi";
 103                 };
 104                 spi_out {
 105                         lantiq,groups = "spi_do", "spi_clk",
 106                                 "spi_cs1";
 107                         lantiq,function = "spi";
 108                         lantiq,output = <1>;
 109                 };
 110         };
 111 };
 112
 113 &gsw {
 114         phy-mode = "mii";
 115         mac-address = [ 00 11 22 33 44 55 ];
 116 };
 117
 118 &spi {
 119         status = "okay";
 120         pinctrl-names = "default";
 121         pinctrl-0 = <&pins_spi_default>;
 122
 123         m25p80@1 {
 124                 compatible = "jedec,spi-nor";
 125                 reg = <1>;
 126                 spi-max-frequency = <5000000>;
 127
 128                 partitions {
 129                         compatible = "fixed-partitions";
 130                         #address-cells = <1>;
 131                         #size-cells = <1>;
 132
 133                         partition@0 {
 134                                 reg = <0x0 0x20000>;
 135                                 label = "SPI (RO) U-Boot Image";
 136                                 read-only;
 137                         };
 138
 139                         partition@20000 {
 140                                 reg = <0x20000 0x10000>;
 141                                 label = "ENV_MAC";
 142                                 read-only;
 143                         };
 144
 145                         partition@30000 {
 146                                 reg = <0x30000 0x10000>;
 147                                 label = "DPF";
 148                                 read-only;
 149                         };
 150
 151                         partition@40000 {
 152                                 reg = <0x40000 0x10000>;
 153                                 label = "NVRAM";
 154                                 read-only;
 155                         };
 156
 157                         partition@500000 {
 158                                 reg = <0x50000 0x003a0000>;
 159                                 label = "kernel";
 160                         };
 161                 };
 162         };
 163 };
 164
 165 &usb_phy {
 166         status = "okay";
 167 };
 168
 169 &usb {
 170         status = "okay";
 171 };