target/linux/lantiq/files/arch/mips/boot/dts/ARV7525PW.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
   9         model = "Speedport W303V Typ A";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power_green;
  17                 led-failsafe = &power_red;
  18                 led-running = &power_green;
  19                 led-upgrade = &power_green;
  20
  21                 led-dsl = &power_green;
  22                 led-internet = &online;
  23                 led-wifi = &wifi;
  24         };
  25
  26         memory@0 {
  27                 device_type = "memory";
  28                 reg = <0x0 0x2000000>;
  29         };
  30
  31         gpio-keys-polled {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <100>;
  34
  35                 wps {
  36                         label = "wps";
  37                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_WPS_BUTTON>;
  39                 };
  40                 reset {
  41                         label = "reset";
  42                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_RESTART>;
  44                 };
  45         };
  46
  47         gpio-leds {
  48                 compatible = "gpio-leds";
  49                 power_green: power {
  50                         label = "arv7525pw:green:power";
  51                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  52                         default-state = "keep";
  53                 };
  54                 power_red: power1 {
  55                         label = "arv7525pw:red:power";
  56                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  57                 };
  58                 online: online {
  59                         label = "arv7525pw:green:online";
  60                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  61                 };
  62                 voice {
  63                         label = "arv7525pw:green:telefonie";
  64                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  65                 };
  66                 voice2 {
  67                         label = "arv7525pw:red:telefonie";
  68                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  69                 };
  70                 wifi: wifi {
  71                         label = "arv7525pw:green:wlan";
  72                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  73                 };
  74         };
  75 };
  76
  77 &gpio {
  78         pinctrl-names = "default";
  79         pinctrl-0 = <&state_default>;
  80
  81         state_default: pinmux {
  82                 exin {
  83                         lantiq,groups = "exin1";
  84                         lantiq,function = "exin";
  85                 };
  86                 pci {
  87                         lantiq,groups = "gnt1", "req1";
  88                         lantiq,function = "pci";
  89                 };
  90         };
  91 };
  92
  93 &gsw {
  94         phy-mode = "mii";
  95         mtd-mac-address = <&boardconfig 0x16>;
  96 };
  97
  98 &localbus {
  99         nor@0 {
 100                 compatible = "lantiq,nor";
 101                 bank-width = <2>;
 102                 reg = <0 0x0 0x2000000>;
 103
 104                 partitions {
 105                         compatible = "fixed-partitions";
 106                         #address-cells = <1>;
 107                         #size-cells = <1>;
 108
 109                         partition@0 {
 110                                 label = "uboot";
 111                                 reg = <0x00000 0x10000>;
 112                                 read-only;
 113                         };
 114
 115                         partition@10000 {
 116                                 label = "uboot_env";
 117                                 reg = <0x10000 0x10000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@20000 {
 122                                 label = "firmware";
 123                                 reg = <0x20000 0x3d0000>;
 124                         };
 125
 126                         boardconfig: partition@400000 {
 127                                 label = "board_config";
 128                                 reg = <0x3f0000 0x10000>;
 129                                 read-only;
 130                         };
 131                 };
 132         };
 133 };
 134
 135 &pci0 {
 136         status = "okay";
 137         interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
 138
 139         wifi@0,0 {
 140                 compatible = "pci0,0";
 141                 reg = <0x7000 0 0 0 0>;
 142                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 143         };
 144 };
 145
 146 &vmmc {
 147         status = "okay";
 148         gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
 149 };