target/linux/lantiq/files/arch/mips/boot/dts/ARV7518PW.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube";
   9         model = "Astoria Networks ARV7518PW";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power_green;
  17                 led-failsafe = &power_red;
  18                 led-running = &power_green;
  19                 led-upgrade = &power_green;
  20
  21                 led-dsl = &dsl;
  22                 led-internet = &online_green;
  23                 led-usb = &led_usb;
  24                 led-wifi = &wifi;
  25         };
  26
  27         memory@0 {
  28                 device_type = "memory";
  29                 reg = <0x0 0x4000000>;
  30         };
  31
  32         gpio-keys-polled {
  33                 compatible = "gpio-keys-polled";
  34                 poll-interval = <100>;
  35
  36                 rfkill {
  37                         label = "rfkill";
  38                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_RFKILL>;
  40                 };
  41                 reset {
  42                         label = "reset";
  43                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_RESTART>;
  45                 };
  46         };
  47
  48         gpio-leds {
  49                 compatible = "gpio-leds";
  50                 power_green: power {
  51                         label = "arv7518pw:green:power";
  52                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  53                         default-state = "keep";
  54                 };
  55                 dsl: dsl {
  56                         label = "arv7518pw:green:dsl";
  57                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  58                 };
  59                 online_green: online {
  60                         label = "arv7518pw:green:internet";
  61                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  62                 };
  63                 wifi: wifi {
  64                         label = "arv7518pw:green:wlan";
  65                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  66                 };
  67                 power_red: power2 {
  68                         label = "arv7518pw:red:power";
  69                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  70                 };
  71                 online2 {
  72                         label = "arv7518pw:red:internet";
  73                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  74                 };
  75                 led_usb: usb {
  76                         label = "arv7518pw:green:usb";
  77                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  78                 };
  79                 voice {
  80                         label = "arv7518pw:green:voip";
  81                         gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
  82                 };
  83                 fxs1 {
  84                         label = "arv7518pw:green:phone1";
  85                         gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
  86                 };
  87                 fxs2 {
  88                         label = "arv7518pw:green:phone2";
  89                         gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
  90                 };
  91                 unlabeled {
  92                         label = "arv7518pw:amber:unlabeled";
  93                         gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
  94                 };
  95                 wps {
  96                         label = "arv7518pw:amber:wps";
  97                         gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
  98                 };
  99                 wps2 {
 100                         label = "arv7518pw:green:wps";
 101                         gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
 102                 };
 103                 wps3 {
 104                         label = "arv7518pw:red:wps";
 105                         gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
 106                 };
 107         };
 108 };
 109
 110 &gpio {
 111         pinctrl-names = "default";
 112         pinctrl-0 = <&state_default>;
 113
 114         state_default: pinmux {
 115                 ebu {
 116                         lantiq,groups = "ebu cs1";
 117                         lantiq,function = "ebu";
 118                 };
 119                 pci_in {
 120                         lantiq,groups = "req1";
 121                         lantiq,function = "pci";
 122                         lantiq,open-drain = <1>;
 123                         lantiq,pull = <2>;
 124                         lantiq,output = <0>;
 125                 };
 126                 pci_out {
 127                         lantiq,groups = "gnt1";
 128                         lantiq,function = "pci";
 129                         lantiq,pull = <0>;
 130                         lantiq,output = <1>;
 131                 };
 132                 pci_rst {
 133                         lantiq,pins = "io21";
 134                         lantiq,pull = <2>;
 135                         lantiq,output = <1>;
 136                 };
 137                 leds {
 138                         lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
 139                         lantiq,output = <1>;
 140                 };
 141                 keys {
 142                         lantiq,pins = "io28", "io30";
 143                         lantiq,output = <0>;
 144                         lantiq,pull = <2>;
 145                         lantiq,open-drain = <1>;
 146                 };
 147         };
 148
 149         usb_vbus: regulator-usb-vbus {
 150                 compatible = "regulator-fixed";
 151
 152                 regulator-name = "USB_VBUS";
 153
 154                 regulator-min-microvolt = <5000000>;
 155                 regulator-max-microvolt = <5000000>;
 156
 157                 gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
 158                 enable-active-high;
 159         };
 160 };
 161
 162 /*
 163 #define SWITCH_RESET          13
 164 */
 165 &gsw {
 166         phy-mode = "mii";
 167         mtd-mac-address = <&boardconfig 0x16>;
 168 };
 169
 170 &localbus {
 171         nor@0 {
 172                 compatible = "lantiq,nor";
 173                 bank-width = <2>;
 174                 reg = <0 0x0 0x2000000>;
 175
 176                 partitions {
 177                         compatible = "fixed-partitions";
 178                         #address-cells = <1>;
 179                         #size-cells = <1>;
 180
 181                         partition@0 {
 182                                 label = "uboot";
 183                                 reg = <0x00000 0x10000>;
 184                                 read-only;
 185                         };
 186
 187                         partition@10000 {
 188                                 label = "uboot_env";
 189                                 reg = <0x10000 0x10000>;
 190                         };
 191
 192                         partition@20000 {
 193                                 label = "firmware";
 194                                 reg = <0x20000 0x7d0000>;
 195                         };
 196
 197                         boardconfig: partition@400000 {
 198                                 label = "boardconfig";
 199                                 reg = <0x7f0000 0x10000>;
 200                                 read-only;
 201                         };
 202                 };
 203         };
 204
 205         gpiomm: gpiomm@1 {
 206                 compatible = "lantiq,gpio-mm";
 207                 reg = <1 0x0 0x10 >;
 208                 #address-cells = <1>;
 209                 #size-cells = <1>;
 210                 #gpio-cells = <2>;
 211                 gpio-controller;
 212                 lantiq,shadow = <0x0>;
 213         };
 214 };
 215
 216 &pci0 {
 217         status = "okay";
 218         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 219         lantiq,external-clock;
 220         req-mask = <0xf>;
 221
 222         wifi@168c,0029 {
 223                 compatible = "pci168c,0029";
 224                 reg = <0x7000 0 0 0 0>;
 225                 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
 226                 mtd-mac-address = <&boardconfig 0x16>;
 227                 mtd-mac-address-increment = <1>;
 228         };
 229 };
 230
 231 &usb_phy {
 232         status = "okay";
 233 };
 234
 235 &usb {
 236         status = "okay";
 237         vbus-supply = <&usb_vbus>;
 238 };
 239
 240 &vmmc {
 241         status = "okay";
 242 };