target/linux/lantiq/dts/vr9.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,vr9";
   7
   8         cpus {
   9                 cpu@0 {
  10                         compatible = "mips,mips34Kc";
  11                 };
  12         };
  13
  14         memory@0 {
  15                 device_type = "memory";
  16         };
  17
  18         cputemp@0 {
  19                 compatible = "lantiq,cputemp";
  20         };
  21
  22         biu@1F800000 {
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25                 compatible = "lantiq,biu", "simple-bus";
  26                 reg = <0x1F800000 0x800000>;
  27                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  28
  29                 icu0: icu@80200 {
  30                         #interrupt-cells = <1>;
  31                         interrupt-controller;
  32                         compatible = "lantiq,icu";
  33                         reg = <0x80200 0x28
  34                                 0x80228 0x28
  35                                 0x80250 0x28
  36                                 0x80278 0x28
  37                                 0x802a0 0x28>;
  38                 };
  39
  40                 watchdog@803F0 {
  41                         compatible = "lantiq,wdt";
  42                         reg = <0x803F0 0x10>;
  43                 };
  44         };
  45
  46         sram@1F000000 {
  47                 #address-cells = <1>;
  48                 #size-cells = <1>;
  49                 compatible = "lantiq,sram", "simple-bus";
  50                 reg = <0x1F000000 0x800000>;
  51                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  52
  53                 eiu0: eiu@101000 {
  54                         #interrupt-cells = <1>;
  55                         interrupt-controller;
  56                         compatible = "lantiq,eiu-xway";
  57                         reg = <0x101000 0x1000>;
  58                         interrupt-parent = <&icu0>;
  59                         lantiq,eiu-irqs = <166 135 66 40 41 42>;
  60                 };
  61
  62                 pmu0: pmu@102000 {
  63                         compatible = "lantiq,pmu-xway";
  64                         reg = <0x102000 0x1000>;
  65                 };
  66
  67                 cgu0: cgu@103000 {
  68                         compatible = "lantiq,cgu-xway";
  69                         reg = <0x103000 0x1000>;
  70                 };
  71
  72                 dcdc@106a00 {
  73                         compatible = "lantiq,dcdc-xrx200";
  74                         reg = <0x106a00 0x200>;
  75                 };
  76
  77                 vmmc@107000 {
  78                         status = "disabled";
  79                         compatible = "lantiq,vmmc-xway";
  80                         reg = <0x103000 0x400>;
  81                         interrupt-parent = <&icu0>;
  82                         interrupts = <150 151 152 153 154 155>;
  83                 };
  84
  85                 rcu0: rcu@203000 {
  86                         compatible = "lantiq,rcu-xrx200";
  87                         reg = <0x203000 0x1000>;
  88                         /* irq for thermal sensor */
  89                         interrupt-parent = <&icu0>;
  90                         interrupts = <115>;
  91                 };
  92
  93                 xbar0: xbar@400000 {
  94                         compatible = "lantiq,xbar-xway";
  95                         reg = <0x400000 0x1000>;
  96                 };
  97         };
  98
  99         fpi@10000000 {
 100                 #address-cells = <1>;
 101                 #size-cells = <1>;
 102                 compatible = "lantiq,fpi", "simple-bus";
 103                 ranges = <0x0 0x10000000 0xEEFFFFF>;
 104                 reg = <0x10000000 0xEF00000>;
 105
 106                 localbus@0 {
 107                         #address-cells = <2>;
 108                         #size-cells = <1>;
 109                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
 110                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 111                         compatible = "lantiq,localbus", "simple-bus";
 112                 };
 113
 114                 gptu@E100A00 {
 115                         compatible = "lantiq,gptu-xway";
 116                         reg = <0xE100A00 0x100>;
 117                         interrupt-parent = <&icu0>;
 118                         interrupts = <126 127 128 129 130 131>;
 119                 };
 120
 121                 asc0: serial@E100400 {
 122                         compatible = "lantiq,asc";
 123                         reg = <0xE100400 0x400>;
 124                         interrupt-parent = <&icu0>;
 125                         interrupts = <104 105 106>;
 126                         status = "disabled";
 127                 };
 128
 129                 spi: spi@E100800 {
 130                         compatible = "lantiq,xrx200-spi";
 131                         reg = <0xE100800 0x100>;
 132                         interrupt-parent = <&icu0>;
 133                         interrupts = <22 23 24>;
 134                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 135                                         "spi_frm";
 136                         #address-cells = <1>;
 137                         #size-cells = <1>;
 138                         status = "disabled";
 139                 };
 140
 141                 gpio: pinmux@E100B10 {
 142                         compatible = "lantiq,xrx200-pinctrl";
 143                         #gpio-cells = <2>;
 144                         gpio-controller;
 145                         reg = <0xE100B10 0xA0>;
 146                 };
 147
 148                 asc1: serial@E100C00 {
 149                         compatible = "lantiq,asc";
 150                         reg = <0xE100C00 0x400>;
 151                         interrupt-parent = <&icu0>;
 152                         interrupts = <112 113 114>;
 153                 };
 154
 155                 deu@E103100 {
 156                         compatible = "lantiq,deu-xrx200";
 157                         reg = <0xE103100 0xf00>;
 158                 };
 159
 160                 dma0: dma@E104100 {
 161                         compatible = "lantiq,dma-xway";
 162                         reg = <0xE104100 0x800>;
 163                 };
 164
 165                 ebu0: ebu@E105300 {
 166                         compatible = "lantiq,ebu-xway";
 167                         reg = <0xE105300 0x100>;
 168                 };
 169
 170                 ifxhcd@E101000 {
 171                         status = "disabled";
 172                         compatible = "lantiq,ifxhcd-xrx200", "lantiq,ifxhcd-xrx200-dwc2";
 173                         reg = <0xE101000 0x1000
 174                                 0xE120000 0x3f000>;
 175                         interrupt-parent = <&icu0>;
 176                         interrupts = <62 91>;
 177                 };
 178
 179                 ifxhcd@E106000 {
 180                         status = "disabled";
 181                         compatible = "lantiq,ifxhcd-xrx200-dwc2";
 182                         reg = <0xE106000 0x1000>;
 183                         interrupt-parent = <&icu0>;
 184                         interrupts = <91>;
 185                 };
 186
 187                 eth0: eth@E108000 {
 188                         #address-cells = <1>;
 189                         #size-cells = <0>;
 190                         compatible = "lantiq,xrx200-net";
 191                         reg = < 0xE108000 0x3000 /* switch */
 192                                 0xE10B100 0x70 /* mdio */
 193                                 0xE10B1D8 0x30 /* mii */
 194                                 0xE10B308 0x30 /* pmac */
 195                         >;
 196                         interrupt-parent = <&icu0>;
 197                         interrupts = <75 73 72>;
 198                 };
 199
 200                 mei@E116000 {
 201                         compatible = "lantiq,mei-xrx200";
 202                         reg = <0xE116000 0x9c>;
 203                         interrupt-parent = <&icu0>;
 204                         interrupts = <63>;
 205                 };
 206
 207                 ppe@E234000 {
 208                         compatible = "lantiq,ppe-xrx200";
 209                         interrupt-parent = <&icu0>;
 210                         interrupts = <96>;
 211                 };
 212
 213                 pcie0: pcie@d900000 {
 214                         compatible = "lantiq,pcie-xrx200";
 215
 216                         #interrupt-cells = <1>;
 217                         #size-cells = <2>;
 218                         #address-cells = <3>;
 219
 220                         interrupt-parent = <&icu0>;
 221                         interrupts = <161 144>;
 222
 223                         device_type = "pci";
 224
 225                         gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
 226                 };
 227
 228                 pci0: pci@E105400 {
 229                         status = "disabled";
 230
 231                         #address-cells = <3>;
 232                         #size-cells = <2>;
 233                         #interrupt-cells = <1>;
 234                         compatible = "lantiq,pci-xway";
 235                         bus-range = <0x0 0x0>;
 236                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 237                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 238                         reg = <0x7000000 0x8000         /* config space */
 239                                 0xE105400 0x400>;       /* pci bridge */
 240                         lantiq,bus-clock = <33333333>;
 241                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 242                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
 243                         req-mask = <0x1>; /* GNT1 */
 244                 };
 245         };
 246
 247         vdsl {
 248                 compatible = "lantiq,vdsl-vrx200";
 249         };
 250 };