target/linux/lantiq/dts/vr9.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2 #include <dt-bindings/input/input.h>
   3
   4 / {
   5         #address-cells = <1>;
   6         #size-cells = <1>;
   7         compatible = "lantiq,xway", "lantiq,vr9";
   8
   9         cpus {
  10                 cpu@0 {
  11                         compatible = "mips,mips34Kc";
  12                 };
  13         };
  14
  15         memory@0 {
  16                 device_type = "memory";
  17         };
  18
  19         cputemp@0 {
  20                 compatible = "lantiq,cputemp";
  21         };
  22
  23         biu@1F800000 {
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26                 compatible = "lantiq,biu", "simple-bus";
  27                 reg = <0x1F800000 0x800000>;
  28                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  29
  30                 icu0: icu@80200 {
  31                         #interrupt-cells = <1>;
  32                         interrupt-controller;
  33                         compatible = "lantiq,icu";
  34                         reg = <0x80200 0x28
  35                                 0x80228 0x28
  36                                 0x80250 0x28
  37                                 0x80278 0x28
  38                                 0x802a0 0x28>;
  39                 };
  40
  41                 watchdog@803F0 {
  42                         compatible = "lantiq,wdt";
  43                         reg = <0x803F0 0x10>;
  44                 };
  45         };
  46
  47         sram@1F000000 {
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50                 compatible = "lantiq,sram", "simple-bus";
  51                 reg = <0x1F000000 0x800000>;
  52                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  53
  54                 eiu0: eiu@101000 {
  55                         #interrupt-cells = <1>;
  56                         interrupt-controller;
  57                         compatible = "lantiq,eiu-xway";
  58                         reg = <0x101000 0x1000>;
  59                         interrupt-parent = <&icu0>;
  60                         lantiq,eiu-irqs = <166 135 66 40 41 42>;
  61                 };
  62
  63                 pmu0: pmu@102000 {
  64                         compatible = "lantiq,pmu-xway";
  65                         reg = <0x102000 0x1000>;
  66                 };
  67
  68                 cgu0: cgu@103000 {
  69                         compatible = "lantiq,cgu-xway";
  70                         reg = <0x103000 0x1000>;
  71                 };
  72
  73                 dcdc@106a00 {
  74                         compatible = "lantiq,dcdc-xrx200";
  75                         reg = <0x106a00 0x200>;
  76                 };
  77
  78                 rcu0: rcu@203000 {
  79                         compatible = "lantiq,rcu-xrx200";
  80                         reg = <0x203000 0x1000>;
  81                         /* irq for thermal sensor */
  82                         interrupt-parent = <&icu0>;
  83                         interrupts = <115>;
  84                 };
  85
  86                 xbar0: xbar@400000 {
  87                         compatible = "lantiq,xbar-xway";
  88                         reg = <0x400000 0x1000>;
  89                 };
  90         };
  91
  92         fpi@10000000 {
  93                 #address-cells = <1>;
  94                 #size-cells = <1>;
  95                 compatible = "lantiq,fpi", "simple-bus";
  96                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  97                 reg = <0x10000000 0xEF00000>;
  98
  99                 localbus@0 {
 100                         #address-cells = <2>;
 101                         #size-cells = <1>;
 102                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
 103                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 104                         compatible = "lantiq,localbus", "simple-bus";
 105                 };
 106
 107                 gptu@E100A00 {
 108                         compatible = "lantiq,gptu-xway";
 109                         reg = <0xE100A00 0x100>;
 110                         interrupt-parent = <&icu0>;
 111                         interrupts = <126 127 128 129 130 131>;
 112                 };
 113
 114                 asc0: serial@E100400 {
 115                         compatible = "lantiq,asc";
 116                         reg = <0xE100400 0x400>;
 117                         interrupt-parent = <&icu0>;
 118                         interrupts = <104 105 106>;
 119                         status = "disabled";
 120                 };
 121
 122                 spi: spi@E100800 {
 123                         compatible = "lantiq,xrx200-spi";
 124                         reg = <0xE100800 0x100>;
 125                         interrupt-parent = <&icu0>;
 126                         interrupts = <22 23 24>;
 127                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 128                                         "spi_frm";
 129                         #address-cells = <1>;
 130                         #size-cells = <1>;
 131                         status = "disabled";
 132                 };
 133
 134                 gpio: pinmux@E100B10 {
 135                         compatible = "lantiq,xrx200-pinctrl";
 136                         #gpio-cells = <2>;
 137                         gpio-controller;
 138                         reg = <0xE100B10 0xA0>;
 139                 };
 140
 141                 asc1: serial@E100C00 {
 142                         compatible = "lantiq,asc";
 143                         reg = <0xE100C00 0x400>;
 144                         interrupt-parent = <&icu0>;
 145                         interrupts = <112 113 114>;
 146                 };
 147
 148                 deu@E103100 {
 149                         compatible = "lantiq,deu-xrx200";
 150                         reg = <0xE103100 0xf00>;
 151                 };
 152
 153                 dma0: dma@E104100 {
 154                         compatible = "lantiq,dma-xway";
 155                         reg = <0xE104100 0x800>;
 156                 };
 157
 158                 ebu0: ebu@E105300 {
 159                         compatible = "lantiq,ebu-xway";
 160                         reg = <0xE105300 0x100>;
 161                 };
 162
 163                 ifxhcd@E101000 {
 164                         status = "disabled";
 165                         compatible = "lantiq,ifxhcd-xrx200", "lantiq,ifxhcd-xrx200-dwc2";
 166                         reg = <0xE101000 0x1000
 167                                 0xE120000 0x3f000>;
 168                         interrupt-parent = <&icu0>;
 169                         interrupts = <62 91>;
 170                 };
 171
 172                 ifxhcd@E106000 {
 173                         status = "disabled";
 174                         compatible = "lantiq,ifxhcd-xrx200-dwc2";
 175                         reg = <0xE106000 0x1000>;
 176                         interrupt-parent = <&icu0>;
 177                         interrupts = <91>;
 178                 };
 179
 180                 eth0: eth@E108000 {
 181                         #address-cells = <1>;
 182                         #size-cells = <0>;
 183                         compatible = "lantiq,xrx200-net";
 184                         reg = < 0xE108000 0x3000 /* switch */
 185                                 0xE10B100 0x70 /* mdio */
 186                                 0xE10B1D8 0x30 /* mii */
 187                                 0xE10B308 0x30 /* pmac */
 188                         >;
 189                         interrupt-parent = <&icu0>;
 190                         interrupts = <75 73 72>;
 191                 };
 192
 193                 mei@E116000 {
 194                         compatible = "lantiq,mei-xrx200";
 195                         reg = <0xE116000 0x9c>;
 196                         interrupt-parent = <&icu0>;
 197                         interrupts = <63>;
 198                 };
 199
 200                 ppe@E234000 {
 201                         compatible = "lantiq,ppe-xrx200";
 202                         interrupt-parent = <&icu0>;
 203                         interrupts = <96>;
 204                 };
 205
 206                 pcie@d900000 {
 207                         interrupt-parent = <&icu0>;
 208                         interrupts = <161 144>;
 209                         compatible = "lantiq,pcie-xrx200";
 210                         gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
 211                 };
 212
 213                 pci0: pci@E105400 {
 214                         #address-cells = <3>;
 215                         #size-cells = <2>;
 216                         #interrupt-cells = <1>;
 217                         compatible = "lantiq,pci-xway";
 218                         bus-range = <0x0 0x0>;
 219                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 220                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 221                         reg = <0x7000000 0x8000         /* config space */
 222                                 0xE105400 0x400>;       /* pci bridge */
 223                         status = "disabled";
 224                 };
 225         };
 226
 227         vdsl {
 228                 compatible = "lantiq,vdsl-vrx200";
 229         };
 230 };