target/linux/lantiq/dts/vr9.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2 #include <dt-bindings/input/input.h>
   3
   4 / {
   5         #address-cells = <1>;
   6         #size-cells = <1>;
   7         compatible = "lantiq,xway", "lantiq,vr9";
   8
   9         cpus {
  10                 cpu@0 {
  11                         compatible = "mips,mips34Kc";
  12                 };
  13         };
  14
  15         memory@0 {
  16                 device_type = "memory";
  17         };
  18
  19         cputemp@0 {
  20                 compatible = "lantiq,cputemp";
  21         };
  22
  23         biu@1F800000 {
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26                 compatible = "lantiq,biu", "simple-bus";
  27                 reg = <0x1F800000 0x800000>;
  28                 ranges = <0x0 0x1F800000 0x7FFFFF>;
  29
  30                 icu0: icu@80200 {
  31                         #interrupt-cells = <1>;
  32                         interrupt-controller;
  33                         compatible = "lantiq,icu";
  34                         reg = <0x80200 0x28
  35                                 0x80228 0x28
  36                                 0x80250 0x28
  37                                 0x80278 0x28
  38                                 0x802a0 0x28>;
  39                 };
  40
  41                 watchdog@803F0 {
  42                         compatible = "lantiq,wdt";
  43                         reg = <0x803F0 0x10>;
  44                 };
  45         };
  46
  47         sram@1F000000 {
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50                 compatible = "lantiq,sram", "simple-bus";
  51                 reg = <0x1F000000 0x800000>;
  52                 ranges = <0x0 0x1F000000 0x7FFFFF>;
  53
  54                 eiu0: eiu@101000 {
  55                         #interrupt-cells = <1>;
  56                         interrupt-controller;
  57                         compatible = "lantiq,eiu-xway";
  58                         reg = <0x101000 0x1000>;
  59                         interrupt-parent = <&icu0>;
  60                         lantiq,eiu-irqs = <166 135 66 40 41 42>;
  61                 };
  62
  63                 pmu0: pmu@102000 {
  64                         compatible = "lantiq,pmu-xway";
  65                         reg = <0x102000 0x1000>;
  66                 };
  67
  68                 cgu0: cgu@103000 {
  69                         compatible = "lantiq,cgu-xway";
  70                         reg = <0x103000 0x1000>;
  71                 };
  72
  73                 dcdc@106a00 {
  74                         compatible = "lantiq,dcdc-xrx200";
  75                         reg = <0x106a00 0x200>;
  76                 };
  77
  78                 vmmc@107000 {
  79                         status = "disabled";
  80                         compatible = "lantiq,vmmc-xway";
  81                         reg = <0x103000 0x400>;
  82                         interrupt-parent = <&icu0>;
  83                         interrupts = <150 151 152 153 154 155>;
  84                 };
  85
  86                 rcu0: rcu@203000 {
  87                         compatible = "lantiq,rcu-xrx200";
  88                         reg = <0x203000 0x1000>;
  89                         /* irq for thermal sensor */
  90                         interrupt-parent = <&icu0>;
  91                         interrupts = <115>;
  92                 };
  93
  94                 xbar0: xbar@400000 {
  95                         compatible = "lantiq,xbar-xway";
  96                         reg = <0x400000 0x1000>;
  97                 };
  98         };
  99
 100         fpi@10000000 {
 101                 #address-cells = <1>;
 102                 #size-cells = <1>;
 103                 compatible = "lantiq,fpi", "simple-bus";
 104                 ranges = <0x0 0x10000000 0xEEFFFFF>;
 105                 reg = <0x10000000 0xEF00000>;
 106
 107                 localbus@0 {
 108                         #address-cells = <2>;
 109                         #size-cells = <1>;
 110                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
 111                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 112                         compatible = "lantiq,localbus", "simple-bus";
 113                 };
 114
 115                 gptu@E100A00 {
 116                         compatible = "lantiq,gptu-xway";
 117                         reg = <0xE100A00 0x100>;
 118                         interrupt-parent = <&icu0>;
 119                         interrupts = <126 127 128 129 130 131>;
 120                 };
 121
 122                 asc0: serial@E100400 {
 123                         compatible = "lantiq,asc";
 124                         reg = <0xE100400 0x400>;
 125                         interrupt-parent = <&icu0>;
 126                         interrupts = <104 105 106>;
 127                         status = "disabled";
 128                 };
 129
 130                 spi: spi@E100800 {
 131                         compatible = "lantiq,xrx200-spi";
 132                         reg = <0xE100800 0x100>;
 133                         interrupt-parent = <&icu0>;
 134                         interrupts = <22 23 24>;
 135                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 136                                         "spi_frm";
 137                         #address-cells = <1>;
 138                         #size-cells = <1>;
 139                         status = "disabled";
 140                 };
 141
 142                 gpio: pinmux@E100B10 {
 143                         compatible = "lantiq,xrx200-pinctrl";
 144                         #gpio-cells = <2>;
 145                         gpio-controller;
 146                         reg = <0xE100B10 0xA0>;
 147                 };
 148
 149                 asc1: serial@E100C00 {
 150                         compatible = "lantiq,asc";
 151                         reg = <0xE100C00 0x400>;
 152                         interrupt-parent = <&icu0>;
 153                         interrupts = <112 113 114>;
 154                 };
 155
 156                 deu@E103100 {
 157                         compatible = "lantiq,deu-xrx200";
 158                         reg = <0xE103100 0xf00>;
 159                 };
 160
 161                 dma0: dma@E104100 {
 162                         compatible = "lantiq,dma-xway";
 163                         reg = <0xE104100 0x800>;
 164                 };
 165
 166                 ebu0: ebu@E105300 {
 167                         compatible = "lantiq,ebu-xway";
 168                         reg = <0xE105300 0x100>;
 169                 };
 170
 171                 ifxhcd@E101000 {
 172                         status = "disabled";
 173                         compatible = "lantiq,ifxhcd-xrx200", "lantiq,ifxhcd-xrx200-dwc2";
 174                         reg = <0xE101000 0x1000
 175                                 0xE120000 0x3f000>;
 176                         interrupt-parent = <&icu0>;
 177                         interrupts = <62 91>;
 178                 };
 179
 180                 ifxhcd@E106000 {
 181                         status = "disabled";
 182                         compatible = "lantiq,ifxhcd-xrx200-dwc2";
 183                         reg = <0xE106000 0x1000>;
 184                         interrupt-parent = <&icu0>;
 185                         interrupts = <91>;
 186                 };
 187
 188                 eth0: eth@E108000 {
 189                         #address-cells = <1>;
 190                         #size-cells = <0>;
 191                         compatible = "lantiq,xrx200-net";
 192                         reg = < 0xE108000 0x3000 /* switch */
 193                                 0xE10B100 0x70 /* mdio */
 194                                 0xE10B1D8 0x30 /* mii */
 195                                 0xE10B308 0x30 /* pmac */
 196                         >;
 197                         interrupt-parent = <&icu0>;
 198                         interrupts = <75 73 72>;
 199                 };
 200
 201                 mei@E116000 {
 202                         compatible = "lantiq,mei-xrx200";
 203                         reg = <0xE116000 0x9c>;
 204                         interrupt-parent = <&icu0>;
 205                         interrupts = <63>;
 206                 };
 207
 208                 ppe@E234000 {
 209                         compatible = "lantiq,ppe-xrx200";
 210                         interrupt-parent = <&icu0>;
 211                         interrupts = <96>;
 212                 };
 213
 214                 pcie@d900000 {
 215                         interrupt-parent = <&icu0>;
 216                         interrupts = <161 144>;
 217                         compatible = "lantiq,pcie-xrx200";
 218                         gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
 219                 };
 220
 221                 pci0: pci@E105400 {
 222                         #address-cells = <3>;
 223                         #size-cells = <2>;
 224                         #interrupt-cells = <1>;
 225                         compatible = "lantiq,pci-xway";
 226                         bus-range = <0x0 0x0>;
 227                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 228                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 229                         reg = <0x7000000 0x8000         /* config space */
 230                                 0xE105400 0x400>;       /* pci bridge */
 231                         status = "disabled";
 232                 };
 233         };
 234
 235         vdsl {
 236                 compatible = "lantiq,vdsl-vrx200";
 237         };
 238 };