6 model = "WBMR300 - Buffalo WBMR-300HPD";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
23 reg = <0x0 0x4000000>;
27 gpio: pinmux@E100B10 {
28 pinctrl-names = "default";
29 pinctrl-0 = <&state_default>;
31 state_default: pinmux {
33 lantiq,groups = "mdio";
34 lantiq,function = "mdio";
39 lantiq,open-drain = <0>;
48 pins_spi_default: pins_spi_default {
50 lantiq,groups = "spi_di";
51 lantiq,function = "spi";
54 lantiq,groups = "spi_do", "spi_clk",
56 lantiq,function = "spi";
65 lantiq,portmask = <0x3>;
75 compatible = "lantiq,phy-xrx200";
76 firmware = "lantiq/vr9_phy22f_a2x.bin";
81 compatible = "gpio-poweroff";
86 compatible = "gpio-keys-polled";
89 poll-interval = <100>;
100 linux,code = <0x198>;
105 gpios = <&gpio 31 1>;
106 linux,code = <0x211>;
111 gpios = <&gpio 48 0>;
112 linux,code = <0x100>;
113 linux,input-type = <5>; /* EV_SW */
119 linux,code = <0x100>;
120 linux,input-type = <5>; /* EV_SW */
125 compatible = "gpio-leds";
128 label = "wbmr300:red:diag";
130 default_state = "off";
134 label = "wbmr300:green:wifi";
144 label = "wbmr300:yellow:router";
149 label = "wbmr300:yellow:wifi";
154 label = "wbmr300:green:lan1";
155 gpios = <&gpio 11 0>;
159 label = "wbmr300:green:wan";
160 gpios = <&gpio 12 0>;
164 label = "wbmr300:green:lan3";
165 gpios = <&gpio 15 0>;
169 label = "wbmr300:green:lan2";
170 gpios = <&gpio 33 0>;
173 internet_g: internet_g {
174 label = "wbmr300:green:internet";
175 gpios = <&gpio 34 0>;
178 internet_y: internet_y {
179 label = "wbmr300:yellow:internet";
180 gpios = <&gpio 35 0>;
184 label = "wbmr300:green:router";
185 gpios = <&gpio 36 0>;
189 label = "wbmr300:green:power";
190 gpios = <&gpio 49 0>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&pins_spi_default>;
201 #address-cells = <1>;
203 compatible = "jedec,spi-nor";
205 spi-max-frequency = <20000000>;
214 reg = <0x10000 0x10000>;
215 label = "gphyfirmware";
220 reg = <0x20000 0x80000>;
225 reg = <0xa0000 0xf40000>;
230 reg = <0xfe0000 0x10000>;
236 reg = <0xff0000 0x2000>;
237 label = "ubootconfig";
241 reg = <0xff3000 0x2000>;
242 label = "board_config";
250 compatible = "lantiq,xrx200-pdi";
251 #address-cells = <1>;
257 compatible = "lantiq,xrx200-pdi-port";
260 phy-handle = <&phy13>;
263 compatible = "lantiq,xrx200-pdi-port";
266 phy-handle = <&phy14>;
269 compatible = "lantiq,xrx200-pdi-port";
272 phy-handle = <&phy11>;
275 compatible = "lantiq,xrx200-pdi-port";
278 phy-handle = <&phy12>;
283 #address-cells = <1>;
285 compatible = "lantiq,xrx200-mdio";
286 phy11: ethernet-phy@11 {
288 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
290 phy12: ethernet-phy@12 {
292 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
294 phy13: ethernet-phy@13 {
296 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
298 phy14: ethernet-phy@14 {
300 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";