target/linux/lantiq/dts/WBMR300.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "WBMR300 - Buffalo WBMR-300HPD";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power_g;
  13                         failsafe = &diag_r;
  14                         running = &power_g;
  15
  16                         dsl = &dsl;
  17                         internet = &router_g;
  18                         wifi = &wifi_g;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x4000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 gpio: pinmux@E100B10 {
  28                         pinctrl-names = "default";
  29                         pinctrl-0 = <&state_default>;
  30
  31                         state_default: pinmux {
  32                                 mdio {
  33                                         lantiq,groups = "mdio";
  34                                         lantiq,function = "mdio";
  35                                 };
  36                                 phy-rst {
  37                                         lantiq,pins = "io42";
  38                                         lantiq,pull = <0>;
  39                                         lantiq,open-drain = <0>;
  40                                         lantiq,output = <1>;
  41                                 };
  42                                 pcie-rst {
  43                                         lantiq,pins = "io38";
  44                                         lantiq,pull = <0>;
  45                                         lantiq,output = <1>;
  46                                 };
  47                         };
  48                         pins_spi_default: pins_spi_default {
  49                                 spi_in {
  50                                         lantiq,groups = "spi_di";
  51                                         lantiq,function = "spi";
  52                                 };
  53                                 spi_out {
  54                                         lantiq,groups = "spi_do", "spi_clk",
  55                                                 "spi_cs4";
  56                                         lantiq,function = "spi";
  57                                         lantiq,output = <1>;
  58                                 };
  59                         };
  60                 };
  61
  62                 ifxhcd@E101000 {
  63                         status = "okay";
  64                         gpios = <&gpio 33 0>;
  65                         lantiq,portmask = <0x3>;
  66                 };
  67
  68                 ifxhcd@E106000 {
  69                         status = "okay";
  70                         gpios = <&gpio 33 0>;
  71                 };
  72         };
  73
  74         gphy-xrx200 {
  75                 compatible = "lantiq,phy-xrx200";
  76                 firmware = "lantiq/vr9_phy22f_a2x.bin";
  77                 phys = [ 00 01 ];
  78         };
  79
  80         gpio_poweroff {
  81                 compatible = "gpio-poweroff";
  82                 gpios = <&gpio 6 1>;
  83         };
  84
  85         gpio-keys-polled {
  86                 compatible = "gpio-keys-polled";
  87                 #address-cells = <1>;
  88                 #size-cells = <0>;
  89                 poll-interval = <100>;
  90
  91                 power {
  92                         label = "power";
  93                         gpios = <&gpio 5 1>;
  94                         linux,code = <0x74>;
  95                 };
  96
  97                 reset {
  98                         label = "reset";
  99                         gpios = <&gpio 7 1>;
 100                         linux,code = <0x198>;
 101                 };
 102
 103                 wps {
 104                         label = "wps";
 105                         gpios = <&gpio 31 1>;
 106                         linux,code = <0x211>;
 107                 };
 108
 109                 auto {
 110                         label = "auto";
 111                         gpios = <&gpio 48 0>;
 112                         linux,code = <0x100>;
 113                         linux,input-type = <5>; /* EV_SW */
 114                 };
 115
 116                 router {
 117                         label = "router";
 118                         gpios = <&gpio 2 0>;
 119                         linux,code = <0x100>;
 120                         linux,input-type = <5>; /* EV_SW */
 121                 };
 122         };
 123
 124         gpio-leds {
 125                 compatible = "gpio-leds";
 126
 127                 diag_r: diag_r {
 128                         label = "wbmr300:red:diag";
 129                         gpios = <&gpio 0 0>;
 130                         default_state = "off";
 131                 };
 132
 133                 wifi_g: wifi_g {
 134                         label = "wbmr300:green:wifi";
 135                         gpios = <&gpio 1 0>;
 136                 };
 137
 138                 dsl: dsl {
 139                         label = "dsl";
 140                         gpios = <&gpio 4 0>;
 141                 };
 142
 143                 router_y: router_y {
 144                         label = "wbmr300:yellow:router";
 145                         gpios = <&gpio 8 0>;
 146                 };
 147
 148                 wifi_y: wifi_y {
 149                         label = "wbmr300:yellow:wifi";
 150                         gpios = <&gpio 9 0>;
 151                 };
 152
 153                 lan1: lan1 {
 154                         label = "wbmr300:green:lan1";
 155                         gpios = <&gpio 11 0>;
 156                 };
 157
 158                 wan: wan {
 159                         label = "wbmr300:green:wan";
 160                         gpios = <&gpio 12 0>;
 161                 };
 162
 163                 lan3: lan3 {
 164                         label = "wbmr300:green:lan3";
 165                         gpios = <&gpio 15 0>;
 166                 };
 167
 168                 lan2: lan2 {
 169                         label = "wbmr300:green:lan2";
 170                         gpios = <&gpio 33 0>;
 171                 };
 172
 173                 internet_g: internet_g {
 174                         label = "wbmr300:green:internet";
 175                         gpios = <&gpio 34 0>;
 176                 };
 177
 178                 internet_y: internet_y {
 179                         label = "wbmr300:yellow:internet";
 180                         gpios = <&gpio 35 0>;
 181                 };
 182
 183                 router_g: router_g {
 184                         label = "wbmr300:green:router";
 185                         gpios = <&gpio 36 0>;
 186                 };
 187
 188                 power_g: power_g {
 189                         label = "wbmr300:green:power";
 190                         gpios = <&gpio 49 0>;
 191                 };
 192         };
 193 };
 194
 195 &spi {
 196         pinctrl-names = "default";
 197         pinctrl-0 = <&pins_spi_default>;
 198
 199         status = "ok";
 200         m25p80@4 {
 201                 #address-cells = <1>;
 202                 #size-cells = <1>;
 203                 compatible = "jedec,spi-nor";
 204                 reg = <4 0>;
 205                 spi-max-frequency = <20000000>;
 206
 207                 partition@0 {
 208                         reg = <0x0 0x10000>;
 209                         label = "u-boot";
 210                         read-only;
 211                 };
 212
 213                 partition@10000 {
 214                         reg = <0x10000 0x10000>;
 215                         label = "gphyfirmware";
 216                         read-only;
 217                 };
 218
 219                 partition@20000 {
 220                         reg = <0x20000 0x80000>;
 221                         label = "dsl_fw";
 222                 };
 223
 224                 partition@de0000 {
 225                         reg = <0xa0000 0xf40000>;
 226                         label = "firmware";
 227                 };
 228
 229                 partition@fe0000 {
 230                         reg = <0xfe0000 0x10000>;
 231                         label = "sysconfig";
 232                         read-only;
 233                 };
 234
 235                 partition@ff0000 {
 236                         reg = <0xff0000 0x2000>;
 237                         label = "ubootconfig";
 238                 };
 239
 240                 partition@ff3000 {
 241                         reg = <0xff3000 0x2000>;
 242                         label = "board_config";
 243                         read-only;
 244                 };
 245         };
 246 };
 247
 248 &eth0 {
 249         lan: interface@0 {
 250                 compatible = "lantiq,xrx200-pdi";
 251                 #address-cells = <1>;
 252                 #size-cells = <0>;
 253                 reg = <0>;
 254                 lantiq,switch;
 255
 256                 ethernet@1 {
 257                         compatible = "lantiq,xrx200-pdi-port";
 258                         reg = <4>;
 259                         phy-mode = "mii";
 260                         phy-handle = <&phy13>;
 261                 };
 262                 ethernet@2 {
 263                         compatible = "lantiq,xrx200-pdi-port";
 264                         reg = <5>;
 265                         phy-mode = "mii";
 266                         phy-handle = <&phy14>;
 267                 };
 268                 ethernet@3 {
 269                         compatible = "lantiq,xrx200-pdi-port";
 270                         reg = <2>;
 271                         phy-mode = "mii";
 272                         phy-handle = <&phy11>;
 273                 };
 274                 ethernet@4 {
 275                         compatible = "lantiq,xrx200-pdi-port";
 276                         reg = <3>;
 277                         phy-mode = "mii";
 278                         phy-handle = <&phy12>;
 279                 };
 280         };
 281
 282         mdio@0 {
 283                 #address-cells = <1>;
 284                 #size-cells = <0>;
 285                 compatible = "lantiq,xrx200-mdio";
 286                 phy11: ethernet-phy@11 {
 287                         reg = <0x11>;
 288                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 289                 };
 290                 phy12: ethernet-phy@12 {
 291                         reg = <0x12>;
 292                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 293                 };
 294                 phy13: ethernet-phy@13 {
 295                         reg = <0x13>;
 296                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 297                 };
 298                 phy14: ethernet-phy@14 {
 299                         reg = <0x14>;
 300                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 301                 };
 302         };
 303 };