target/linux/lantiq/dts/VR200v.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "VR200v - TP-LINK Archer VR200v";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200";
  12         };
  13
  14         aliases {
  15                 led-boot = &power;
  16                 led-failsafe = &power;
  17
  18                 led-dsl = &dsl;
  19                 led-internet = &internet;
  20                 led-usb = &usb;
  21                 led-usb2 = &usb;
  22         };
  23
  24         memory@0 {
  25                 reg = <0x0 0x7f00000>;
  26         };
  27
  28         fpi@10000000 {
  29                 gpio: pinmux@E100B10 {
  30                         pinctrl-names = "default";
  31                         pinctrl-0 = <&state_default>;
  32
  33                         state_default: pinmux {
  34                                 mdio {
  35                                         lantiq,groups = "mdio";
  36                                         lantiq,function = "mdio";
  37                                 };
  38                                 gphy-leds {
  39                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  40                                         lantiq,function = "gphy";
  41                                         lantiq,pull = <2>;
  42                                         lantiq,open-drain = <0>;
  43                                         lantiq,output = <1>;
  44                                 };
  45                                 phy-rst {
  46                                         lantiq,pins = "io42";
  47                                         lantiq,pull = <0>;
  48                                         lantiq,open-drain = <0>;
  49                                         lantiq,output = <1>;
  50                                 };
  51                                 pcie-rst {
  52                                         lantiq,pins = "io38";
  53                                         lantiq,pull = <0>;
  54                                         lantiq,output = <1>;
  55                                 };
  56                         };
  57                         pins_spi_default: pins_spi_default {
  58                                 spi_in {
  59                                         lantiq,groups = "spi_di";
  60                                         lantiq,function = "spi";
  61                                 };
  62                                 spi_out {
  63                                         lantiq,groups = "spi_do", "spi_clk",
  64                                                 "spi_cs4";
  65                                         lantiq,function = "spi";
  66                                         lantiq,output = <1>;
  67                                 };
  68                         };
  69                 };
  70
  71                 ifxhcd@E101000 {
  72                         status = "okay";
  73                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  74                         lantiq,portmask = <0x3>;
  75                 };
  76
  77                 ifxhcd@E106000 {
  78                         status = "okay";
  79                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  80                 };
  81
  82                 pci0: pci@E105400 {
  83                         status = "okay";
  84                         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
  85                 };
  86         };
  87
  88         gphy-xrx200 {
  89                 compatible = "lantiq,phy-xrx200";
  90                 firmware = "lantiq/vr9_phy11g_a2x.bin";
  91                 phys = [ 00 01 ];
  92         };
  93
  94         gpio-keys-polled {
  95                 compatible = "gpio-keys-polled";
  96                 #address-cells = <1>;
  97                 #size-cells = <0>;
  98                 poll-interval = <100>;
  99                 reset {
 100                         label = "reset";
 101                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
 102                         linux,code = <KEY_RESTART>;
 103                 };
 104
 105                 wifi {
 106                         label = "wifi";
 107                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
 108                         linux,code = <KEY_RFKILL>;
 109                         linux,input-type = <EV_SW>;
 110                 };
 111
 112                 wps {
 113                         label = "wps";
 114                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 115                         linux,code = <KEY_WPS_BUTTON>;
 116                 };
 117
 118                 dect_paging {
 119                         label = "dect_paging";
 120                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
 121                         linux,code = <KEY_PHONE>;
 122                 };
 123         };
 124
 125         gpio-leds {
 126                 compatible = "gpio-leds";
 127                 power: power {
 128                         label = "vr200v:blue:power";
 129                         gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
 130                 };
 131                 dsl: dsl {
 132                         label = "vr200v:blue:dsl";
 133                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 134                 };
 135                 internet: internet {
 136                         label = "vr200v:blue:internet";
 137                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 138                 };
 139                 usb: usb {
 140                         label = "vr200v:blue:usb";
 141                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
 142                 };
 143                 eth {
 144                         label = "vr200v:blue:lan";
 145                         gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
 146                 };
 147                 wlan {
 148                         label = "vr200v:blue:wlan";
 149                         gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
 150                 };
 151                 wlan5g {
 152                         label = "vr200v:blue:wlan5g";
 153                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 154                 };
 155                 phone {
 156                         label = "vr200v:blue:phone";
 157                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
 158                 };
 159         };
 160 };
 161
 162 &spi {
 163         pinctrl-names = "default";
 164         pinctrl-0 = <&pins_spi_default>;
 165
 166         status = "ok";
 167
 168         m25p80@4 {
 169                 #address-cells = <1>;
 170                 #size-cells = <1>;
 171                 compatible = "jedec,spi-nor";
 172                 reg = <4 0>;
 173                 spi-max-frequency = <33250000>;
 174                 m25p,fast-read;
 175
 176                 partitions {
 177                         compatible = "fixed-partitions";
 178                         #address-cells = <1>;
 179                         #size-cells = <1>;
 180
 181                         partition@0 {
 182                                 reg = <0x0 0x20000>;
 183                                 label = "u-boot";
 184                                 read-only;
 185                         };
 186
 187                         partition@20000 {
 188                                 reg = <0x20000 0xf90000>;
 189                                 label = "firmware";
 190                         };
 191
 192                         partition@fb0000 {
 193                                 reg = <0xfb0000 0x10000>;
 194                                 label = "radioDECT";
 195                                 read-only;
 196                         };
 197
 198                         partition@fc0000 {
 199                                 reg = <0xfc0000 0x10000>;
 200                                 label = "config";
 201                                 read-only;
 202                         };
 203
 204                         romfile: partition@fd0000 {
 205                                 reg = <0xfd0000 0x10000>;
 206                                 label = "romfile";
 207                                 read-only;
 208                         };
 209
 210                         partition@fe0000 {
 211                                 reg = <0xfe0000 0x10000>;
 212                                 label = "rom";
 213                                 read-only;
 214                         };
 215
 216                         partition@ff0000 {
 217                                 reg = <0xff0000 0x10000>;
 218                                 label = "radio";
 219                                 read-only;
 220                         };
 221                 };
 222         };
 223 };
 224
 225 &eth0 {
 226         lan: interface@0 {
 227                 compatible = "lantiq,xrx200-pdi";
 228                 #address-cells = <1>;
 229                 #size-cells = <0>;
 230                 reg = <0>;
 231                 mtd-mac-address = <&romfile 0xf100>;
 232                 lantiq,switch;
 233
 234                 ethernet@0 {
 235                         compatible = "lantiq,xrx200-pdi-port";
 236                         reg = <0>;
 237                         phy-mode = "rgmii";
 238                         phy-handle = <&phy0>;
 239                         // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
 240                 };
 241                 ethernet@5 {
 242                         compatible = "lantiq,xrx200-pdi-port";
 243                         reg = <5>;
 244                         phy-mode = "rgmii";
 245                         phy-handle = <&phy5>;
 246                 };
 247                 ethernet@2 {
 248                         compatible = "lantiq,xrx200-pdi-port";
 249                         reg = <2>;
 250                         phy-mode = "gmii";
 251                         phy-handle = <&phy11>;
 252                 };
 253                 ethernet@3 {
 254                         compatible = "lantiq,xrx200-pdi-port";
 255                         reg = <4>;
 256                         phy-mode = "gmii";
 257                         phy-handle = <&phy13>;
 258                 };
 259         };
 260
 261         mdio@0 {
 262                 #address-cells = <1>;
 263                 #size-cells = <0>;
 264                 compatible = "lantiq,xrx200-mdio";
 265                 phy0: ethernet-phy@0 {
 266                         reg = <0x0>;
 267                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 268                 };
 269                 phy5: ethernet-phy@5 {
 270                         reg = <0x5>;
 271                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 272                 };
 273                 phy11: ethernet-phy@11 {
 274                         reg = <0x11>;
 275                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 276                 };
 277                 phy13: ethernet-phy@13 {
 278                         reg = <0x13>;
 279                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 280                 };
 281         };
 282 };