target/linux/lantiq/dts/VGV7519.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4
   5     model = "VGV7519 - KPN Experiabox V8";
   6
   7         chosen {
   8                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   9         };
  10
  11         memory@0 {
  12                 reg = <0x0 0x4000000>;
  13         };
  14
  15         fpi@10000000 {
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18                 compatible = "lantiq,fpi", "simple-bus";
  19                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  20                 reg = <0x10000000 0xEF00000>;
  21
  22                 localbus@0 {
  23                         #address-cells = <2>;
  24                         #size-cells = <1>;
  25                         compatible = "lantiq,localbus", "simple-bus";
  26                 };
  27
  28                 gpio: pinmux@E100B10 {
  29                         compatible = "lantiq,pinctrl-xr9";
  30                         pinctrl-names = "default";
  31                         pinctrl-0 = <&state_default>;
  32
  33                         interrupt-parent = <&icu0>;
  34                         interrupts = <166 135 66 40 41 42 38>;
  35
  36                         #gpio-cells = <2>;
  37                         gpio-controller;
  38                         reg = <0xE100B10 0xA0>;
  39
  40                         state_default: pinmux {
  41                                 stp {
  42                                         lantiq,groups = "stp";
  43                                         lantiq,function = "stp";
  44                                 };
  45                                 spi {
  46                                         lantiq,groups = "spi", "spi_cs4";
  47                                         lantiq,function = "spi";
  48                                 };
  49                                 mdio {
  50                                         lantiq,groups = "mdio";
  51                                         lantiq,function = "mdio";
  52                                 };
  53                                 gphy-leds_out {
  54                                         lantiq,pins = "io7", "io44";
  55                                         lantiq,pull = <0>;
  56                                         lantiq,output = <1>;
  57                                 };
  58                                 conf_out {
  59                                         lantiq,pins = "io4", "io5", "io6", /* stp */
  60                                                         "io21",
  61                                                         "io33";
  62                                         lantiq,open-drain;
  63                                         lantiq,pull = <0>;
  64                                         lantiq,output = <1>;
  65                                 };
  66                                 gphy-leds {
  67                                         lantiq,groups = "gphy0 led1", "gphy1 led0";
  68                                         lantiq,function = "gphy";
  69                                         lantiq,open-drain = <0>;
  70                                 };
  71                         };
  72                 };
  73
  74                 eth@E108000 {
  75                         #address-cells = <1>;
  76                         #size-cells = <0>;
  77                         compatible = "lantiq,xrx200-net";
  78                         reg = < 0xE108000 0x3000 /* switch */
  79                                 0xE10B100 0x70 /* mdio */
  80                                 0xE10B1D8 0x30 /* mii */
  81                                 0xE10B308 0x30 /* pmac */
  82                         >;
  83                         interrupt-parent = <&icu0>;
  84                         interrupts = <73 72>;
  85
  86                         lan: interface@0 {
  87                                 compatible = "lantiq,xrx200-pdi";
  88                                 #address-cells = <1>;
  89                                 #size-cells = <0>;
  90                                 reg = <0>;
  91                                 mac-address = [ 00 11 22 33 44 55 ];
  92
  93                                 ethernet@0 {
  94                                         compatible = "lantiq,xrx200-pdi-port";
  95                                         reg = <0>;
  96                                         phy-mode = "rgmii";
  97                                         phy-handle = <&phy0>;
  98                                 };
  99                                 ethernet@1 {
 100                                         compatible = "lantiq,xrx200-pdi-port";
 101                                         reg = <1>;
 102                                         phy-mode = "rgmii";
 103                                         phy-handle = <&phy1>;
 104                                 };
 105                                 ethernet@2 {
 106                                         compatible = "lantiq,xrx200-pdi-port";
 107                                         reg = <2>;
 108                                         phy-mode = "gmii";
 109                                         phy-handle = <&phy11>;
 110                                 };
 111                                 ethernet@4 {
 112                                         compatible = "lantiq,xrx200-pdi-port";
 113                                         reg = <4>;
 114                                         phy-mode = "gmii";
 115                                         phy-handle = <&phy13>;
 116                                 };
 117                         };
 118
 119                         wan: interface@1 {
 120                                 compatible = "lantiq,xrx200-pdi";
 121                                 #address-cells = <1>;
 122                                 #size-cells = <0>;
 123                                 reg = <1>;
 124                                 mac-address = [ 00 11 22 33 44 56 ];
 125                                 lantiq,wan;
 126                                 ethernet@5 {
 127                                         compatible = "lantiq,xrx200-pdi-port";
 128                                         reg = <5>;
 129                                         phy-mode = "rgmii";
 130                                         phy-handle = <&phy5>;
 131                                 };
 132                         };
 133
 134                         mdio@0 {
 135                                 #address-cells = <1>;
 136                                 #size-cells = <0>;
 137                                 compatible = "lantiq,xrx200-mdio";
 138                                 phy0: ethernet-phy@0 {
 139                                         reg = <0x0>;
 140                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 141                                         lantiq,c45-reg-init = <1 0 0 0>;
 142                                 };
 143                                 phy1: ethernet-phy@1 {
 144                                         reg = <0x1>;
 145                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 146                                         lantiq,c45-reg-init = <1 0 0 0>;
 147                                 };
 148                                 phy5: ethernet-phy@5 {
 149                                         reg = <0x5>;
 150                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 151                                         lantiq,c45-reg-init = <1 0 0 0>;
 152                                 };
 153                                 phy11: ethernet-phy@11 {
 154                                         reg = <0x11>;
 155                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 156                                         lantiq,c45-reg-init = <1 0 0 0>;
 157                                 };
 158                                 phy13: ethernet-phy@13 {
 159                                         reg = <0x13>;
 160                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 161                                         lantiq,c45-reg-init = <1 0 0 0>;
 162                                 };
 163                         };
 164                 };
 165
 166                 stp: stp@E100BB0 {
 167                         compatible = "lantiq,gpio-stp-xway";
 168                         reg = <0xE100BB0 0x40>;
 169                         #gpio-cells = <2>;
 170                         gpio-controller;
 171
 172                         lantiq,shadow = <0xffff>;
 173                         lantiq,groups = <0x3>;
 174                         lantiq,dsl = <0x0>;
 175                         lantiq,phy1 = <0x0>;
 176                         lantiq,phy2 = <0x0>;
 177                         /* lantiq,rising; */
 178                 };
 179
 180                 ifxhcd@E101000 {
 181                         status = "okay";
 182                         gpios = <&gpio 32 0>;
 183                         lantiq,portmask = <0x3>;
 184                 };
 185
 186                 pci@E105400 {
 187                         #address-cells = <3>;
 188                         #size-cells = <2>;
 189                         #interrupt-cells = <1>;
 190                         compatible = "lantiq,pci-xway1";
 191                         bus-range = <0x0 0x0>;
 192                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 193                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 194                         reg = <0x7000000 0x8000         /* config space */
 195                                 0xE105400 0x400>;       /* pci bridge */
 196                         lantiq,bus-clock = <33333333>;
 197                         /*lantiq,external-clock;*/
 198                         lantiq,delay-hi = <0>; /* 0ns delay */
 199                         lantiq,delay-lo = <0>; /* 0.0ns delay */
 200                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 201                         interrupt-map = <
 202                                 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
 203                                 >;
 204                         gpios-reset = <&gpio 21 0>;
 205                         req-mask = <0x1>;       /* GNT1 */
 206                 };
 207         };
 208
 209         gphy-xrx200 {
 210                 compatible = "lantiq,phy-xrx200";
 211                 firmware = "lantiq/vr9_phy11g_a1x.bin";
 212                 phys = [ 00 01 ];
 213         };
 214
 215         gpio-keys-polled {
 216                 compatible = "gpio-keys-polled";
 217                 #address-cells = <1>;
 218                 #size-cells = <0>;
 219                 poll-interval = <100>;
 220                 reset {
 221                         label = "reset";
 222                         gpios = <&gpio 9 1>;
 223                         linux,code = <0x198>;
 224                 };
 225                 eco {
 226                         label = "eco";
 227                         gpios = <&gpio 41 1>;
 228                         linux,code = <247>;
 229                 };
 230                 rfkill {
 231                         label = "rfkill";
 232                         gpios = <&gpio 45 1>;
 233                         linux,code = <0xf7>;
 234                 };
 235                 wps {
 236                         label = "wps";
 237                         gpios = <&gpio 10 1>;
 238                         linux,code = <0x211>;
 239                 };
 240         };
 241
 242         gpio-leds {
 243                 compatible = "gpio-leds";
 244
 245                 eco {                                   /* blue */
 246                         label = "eco";
 247                         gpios = <&stp 2 1>;
 248                 };
 249                 wps_red {                               /* red */
 250                         label = "wps_red";
 251                         gpios = <&stp 3 1>;
 252                 };
 253                 wps_yellow {                            /* yellow */
 254                         label = "wps_yellow";
 255                         gpios = <&stp 4 1>;
 256                 };
 257                 upgrade {                               /* blue */
 258                         label = "upgrade";
 259                         gpios = <&stp 5 1>;
 260                 };
 261                 tv {                                    /* yellow */
 262                         label = "tv";
 263                         gpios = <&stp 6 1>;
 264                 };
 265                 internet_yellow {                       /* yellow */
 266                         label = "internet_yellow";
 267                         gpios = <&stp 7 1>;
 268                 };
 269                 internet_red {                          /* red */
 270                         label = "internet_red";
 271                         gpios = <&stp 8 1>;
 272                 };
 273                 broadband_red {                         /* red */
 274                         label = "broadband_red";
 275                         gpios = <&stp 9 1>;
 276                 };
 277                 broadband_yellow {                      /* yellow */
 278                         label = "broadband_yellow";
 279                         gpios = <&stp 10 1>;
 280                 };
 281                 voice {                                 /* yellow */
 282                         label = "voice";
 283                         gpios = <&stp 11 1>;
 284                 };
 285                 wireless_red {                          /* red */
 286                         label = "wireless_red";
 287                         gpios = <&stp 12 1>;
 288                 };
 289                 wireless_yellow {                       /* yellow */
 290                         label = "wireless_yellow";
 291                         gpios = <&stp 13 1>;
 292                 };
 293                 power2 {                                /* yellow */
 294                         label = "power2";
 295                         gpios = <&stp 14 1>;
 296                 };
 297                 power {                                 /* red */
 298                         label = "power";
 299                         gpios = <&stp 15 1>;
 300                         default-state = "on";
 301                 };
 302         };
 303 };