target/linux/lantiq/dts/VGV7519.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4
   5     model = "VGV7519 - KPN Experiabox V8";
   6
   7         chosen {
   8                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   9
  10                 leds {
  11                         boot = &power_green;
  12                         failsafe = &power_red;
  13                         running = &power_green;
  14
  15                         dsl = &broadband_green;
  16                         internet = &internet_green;
  17                         wifi = &wireless_green;
  18                 };
  19         };
  20
  21         memory@0 {
  22                 reg = <0x0 0x4000000>;
  23         };
  24
  25         fpi@10000000 {
  26                 localbus@0 {
  27                         nor-boot@0 {
  28                                 compatible = "lantiq,nor";
  29                                 bank-width = <2>;
  30                                 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
  31                                 #address-cells = <1>;
  32                                 #size-cells = <1>;
  33
  34                                 partitions {
  35                                         compatible = "fixed-partitions";
  36                                         #address-cells = <1>;
  37                                         #size-cells = <1>;
  38
  39                                         boardconfig: partition@40000 {
  40                                                 label = "board_config";
  41                                                 reg = <0x40000 0x10000>;
  42                                                 read-only;
  43                                         };
  44                                 };
  45                         };
  46                 };
  47
  48                 gpio: pinmux@E100B10 {
  49                         pinctrl-names = "default";
  50                         pinctrl-0 = <&state_default>;
  51
  52                         state_default: pinmux {
  53                                 stp {
  54                                         lantiq,groups = "stp";
  55                                         lantiq,function = "stp";
  56                                 };
  57                                 spi {
  58                                         lantiq,groups = "spi_di", "spi_do", "spi_clk";
  59                                         lantiq,function = "spi";
  60                                 };
  61                                 mdio {
  62                                         lantiq,groups = "mdio";
  63                                         lantiq,function = "mdio";
  64                                 };
  65                                 gphy-leds_out {
  66                                         lantiq,pins = "io7", "io44";
  67                                         lantiq,pull = <0>;
  68                                         lantiq,output = <1>;
  69                                 };
  70                                 stp_out {
  71                                         lantiq,pins = "io4", "io5", "io6";
  72                                         lantiq,open-drain = <0>;
  73                                         lantiq,output = <1>;
  74                                         lantiq,pull = <0>;
  75                                 };
  76                                 pci-rst {
  77                                         lantiq,pins = "io21";
  78                                         lantiq,open-drain = <0>;
  79                                         lantiq,pull = <0>;
  80                                         lantiq,output = <1>;
  81                                 };
  82                                 gphy-leds {
  83                                         lantiq,groups = "gphy0 led1", "gphy1 led0";
  84                                         lantiq,function = "gphy";
  85                                         lantiq,open-drain = <0>;
  86                                         lantiq,pull = <0>;
  87                                         lantiq,output = <1>;
  88                                 };
  89                         };
  90                 };
  91
  92                 stp: stp@E100BB0 {
  93                         compatible = "lantiq,gpio-stp-xway";
  94                         reg = <0xE100BB0 0x40>;
  95                         #gpio-cells = <2>;
  96                         gpio-controller;
  97
  98                         lantiq,shadow = <0xffff>;
  99                         lantiq,groups = <0x3>;
 100                         lantiq,dsl = <0x0>;
 101                         lantiq,phy1 = <0x0>;
 102                         lantiq,phy2 = <0x0>;
 103                         /* lantiq,rising; */
 104                 };
 105
 106                 ifxhcd@E101000 {
 107                         status = "okay";
 108                         gpios = <&gpio 32 0>;
 109                         lantiq,portmask = <0x3>;
 110                 };
 111
 112                 pci@E105400 {
 113                         status = "okay";
 114                         lantiq,bus-clock = <33333333>;
 115                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 116                         interrupt-map = <
 117                                 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
 118                                 >;
 119                         gpio-reset = <&gpio 21 0>;
 120                         req-mask = <0x1>;       /* GNT1 */
 121                 };
 122
 123                 pcie@d900000 {
 124                         status = "disabled";
 125                 };
 126         };
 127
 128         gphy-xrx200 {
 129                 compatible = "lantiq,phy-xrx200";
 130                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 131                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 132                 phys = [ 00 01 ];
 133         };
 134
 135         ralink_eep {
 136                 compatible = "ralink,eeprom";
 137                 ralink,eeprom = "RT2860.eeprom";
 138         };
 139
 140         gpio-keys-polled {
 141                 compatible = "gpio-keys-polled";
 142                 #address-cells = <1>;
 143                 #size-cells = <0>;
 144                 poll-interval = <100>;
 145                 reset {
 146                         label = "reset";
 147                         gpios = <&gpio 9 1>;
 148                         linux,code = <0x198>;
 149                 };
 150                 eco {
 151                         label = "eco";
 152                         gpios = <&gpio 41 1>;
 153                         linux,code = <247>;
 154                 };
 155                 rfkill {
 156                         label = "rfkill";
 157                         gpios = <&gpio 45 1>;
 158                         linux,code = <0xf7>;
 159                 };
 160                 wps {
 161                         label = "wps";
 162                         gpios = <&gpio 10 1>;
 163                         linux,code = <0x211>;
 164                 };
 165         };
 166
 167         gpio-leds {
 168                 compatible = "gpio-leds";
 169
 170                 eco {
 171                         label = "vgv7519:blue:eco";
 172                         gpios = <&stp 2 1>;
 173                 };
 174                 wps_red {
 175                         label = "vgv7519:red:wps";
 176                         gpios = <&stp 3 1>;
 177                 };
 178                 wps_green {
 179                         label = "vgv7519:green:wps";
 180                         gpios = <&stp 4 1>;
 181                 };
 182                 upgrade {
 183                         label = "vgv7519:blue:upgrade";
 184                         gpios = <&stp 5 1>;
 185                 };
 186                 tv {
 187                         label = "vgv7519:green:tv";
 188                         gpios = <&stp 6 1>;
 189                 };
 190                 internet_green: internet_green {
 191                         label = "vgv7519:green:internet";
 192                         gpios = <&stp 7 1>;
 193                 };
 194                 internet_red {
 195                         label = "vgv7519:red:internet";
 196                         gpios = <&stp 8 1>;
 197                 };
 198                 broadband_red {
 199                         label = "vgv7519:red:broadband";
 200                         gpios = <&stp 9 1>;
 201                 };
 202                 broadband_green: broadband_green {
 203                         label = "vgv7519:green:broadband";
 204                         gpios = <&stp 10 1>;
 205                 };
 206                 voice {
 207                         label = "vgv7519:green:voice";
 208                         gpios = <&stp 11 1>;
 209                 };
 210                 wireless_red {
 211                         label = "vgv7519:red:wireless";
 212                         gpios = <&stp 12 1>;
 213                 };
 214                 wireless_green: wireless_green {
 215                         label = "vgv7519:green:wireless";
 216                         gpios = <&stp 13 1>;
 217                 };
 218                 power_green: power2 {
 219                         label = "vgv7519:green:power";
 220                         gpios = <&stp 14 1>;
 221                         default-state = "keep";
 222                 };
 223                 power_red: power {
 224                         label = "vgv7519:red:power";
 225                         gpios = <&stp 15 1>;
 226                 };
 227         };
 228 };
 229
 230 &eth0 {
 231         lan: interface@0 {
 232                 compatible = "lantiq,xrx200-pdi";
 233                 #address-cells = <1>;
 234                 #size-cells = <0>;
 235                 reg = <0>;
 236                 mac-address = [ 00 11 22 33 44 55 ];
 237
 238                 ethernet@0 {
 239                         compatible = "lantiq,xrx200-pdi-port";
 240                         reg = <0>;
 241                         phy-mode = "rgmii";
 242                         phy-handle = <&phy0>;
 243                 };
 244                 ethernet@1 {
 245                         compatible = "lantiq,xrx200-pdi-port";
 246                         reg = <1>;
 247                         phy-mode = "rgmii";
 248                         phy-handle = <&phy1>;
 249                 };
 250                 ethernet@2 {
 251                         compatible = "lantiq,xrx200-pdi-port";
 252                         reg = <2>;
 253                         phy-mode = "gmii";
 254                         phy-handle = <&phy11>;
 255                 };
 256                 ethernet@4 {
 257                         compatible = "lantiq,xrx200-pdi-port";
 258                         reg = <4>;
 259                         phy-mode = "gmii";
 260                         phy-handle = <&phy13>;
 261                 };
 262         };
 263
 264         wan: interface@1 {
 265                 compatible = "lantiq,xrx200-pdi";
 266                 #address-cells = <1>;
 267                 #size-cells = <0>;
 268                 reg = <1>;
 269                 mac-address = [ 00 11 22 33 44 56 ];
 270                 lantiq,wan;
 271
 272                 ethernet@5 {
 273                         compatible = "lantiq,xrx200-pdi-port";
 274                         reg = <5>;
 275                         phy-mode = "rgmii";
 276                         phy-handle = <&phy5>;
 277                 };
 278         };
 279
 280         mdio@0 {
 281                 #address-cells = <1>;
 282                 #size-cells = <0>;
 283                 compatible = "lantiq,xrx200-mdio";
 284                 phy0: ethernet-phy@0 {
 285                         reg = <0x0>;
 286                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 287                 };
 288                 phy1: ethernet-phy@1 {
 289                         reg = <0x1>;
 290                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 291                 };
 292                 phy5: ethernet-phy@5 {
 293                         reg = <0x5>;
 294                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 295                 };
 296                 phy11: ethernet-phy@11 {
 297                         reg = <0x11>;
 298                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 299                 };
 300                 phy13: ethernet-phy@13 {
 301                         reg = <0x13>;
 302                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 303                 };
 304         };
 305 };