5 model = "VGV7519 - KPN Experiabox V8";
8 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
12 failsafe = &power_red;
13 running = &power_green;
15 dsl = &broadband_green;
16 internet = &internet_green;
17 wifi = &wireless_green;
22 reg = <0x0 0x4000000>;
26 compatible = "lantiq,cputemp";
32 compatible = "lantiq,nor";
34 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
39 compatible = "fixed-partitions";
43 boardconfig: partition@40000 {
44 label = "board_config";
45 reg = <0x40000 0x10000>;
52 gpio: pinmux@E100B10 {
53 pinctrl-names = "default";
54 pinctrl-0 = <&state_default>;
56 state_default: pinmux {
58 lantiq,groups = "stp";
59 lantiq,function = "stp";
60 lantiq,open-drain = <0>;
65 lantiq,groups = "mdio";
66 lantiq,function = "mdio";
70 lantiq,open-drain = <0>;
75 lantiq,groups = "gphy0 led1", "gphy1 led0";
76 lantiq,function = "gphy";
77 lantiq,open-drain = <0>;
85 compatible = "lantiq,gpio-stp-xway";
86 reg = <0xE100BB0 0x40>;
90 lantiq,shadow = <0xffff>;
91 lantiq,groups = <0x3>;
100 gpios = <&gpio 32 0>;
101 lantiq,portmask = <0x3>;
106 gpios = <&gpio 32 0>;
111 lantiq,bus-clock = <33333333>;
112 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
114 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
116 gpio-reset = <&gpio 21 0>;
117 req-mask = <0x1>; /* GNT1 */
126 compatible = "lantiq,phy-xrx200";
127 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
128 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
133 compatible = "ralink,eeprom";
134 ralink,eeprom = "RT2860.eeprom";
138 compatible = "gpio-keys-polled";
139 #address-cells = <1>;
141 poll-interval = <100>;
145 linux,code = <0x198>;
149 gpios = <&gpio 41 1>;
154 gpios = <&gpio 45 1>;
159 gpios = <&gpio 10 1>;
160 linux,code = <0x211>;
165 compatible = "gpio-leds";
168 label = "vgv7519:blue:eco";
172 label = "vgv7519:red:wps";
176 label = "vgv7519:green:wps";
180 label = "vgv7519:blue:upgrade";
184 label = "vgv7519:green:tv";
187 internet_green: internet_green {
188 label = "vgv7519:green:internet";
192 label = "vgv7519:red:internet";
196 label = "vgv7519:red:broadband";
199 broadband_green: broadband_green {
200 label = "vgv7519:green:broadband";
204 label = "vgv7519:green:voice";
208 label = "vgv7519:red:wireless";
211 wireless_green: wireless_green {
212 label = "vgv7519:green:wireless";
215 power_green: power2 {
216 label = "vgv7519:green:power";
218 default-state = "keep";
221 label = "vgv7519:red:power";
229 compatible = "lantiq,xrx200-pdi";
230 #address-cells = <1>;
233 mtd-mac-address = <&boardconfig 0x16>;
237 compatible = "lantiq,xrx200-pdi-port";
240 phy-handle = <&phy0>;
243 compatible = "lantiq,xrx200-pdi-port";
246 phy-handle = <&phy1>;
249 compatible = "lantiq,xrx200-pdi-port";
252 phy-handle = <&phy11>;
255 compatible = "lantiq,xrx200-pdi-port";
258 phy-handle = <&phy13>;
263 compatible = "lantiq,xrx200-pdi";
264 #address-cells = <1>;
267 mtd-mac-address = <&boardconfig 0x16>;
268 mtd-mac-address-increment = <2>;
272 compatible = "lantiq,xrx200-pdi-port";
275 phy-handle = <&phy5>;
280 #address-cells = <1>;
282 compatible = "lantiq,xrx200-mdio";
283 phy0: ethernet-phy@0 {
285 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
287 phy1: ethernet-phy@1 {
289 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
291 phy5: ethernet-phy@5 {
293 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
295 phy11: ethernet-phy@11 {
297 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
299 phy13: ethernet-phy@13 {
301 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";