target/linux/lantiq/dts/VGV7519.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6
   7         model = "VGV7519 - KPN Experiabox V8";
   8
   9         chosen {
  10                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  11         };
  12
  13         aliases {
  14                 led-boot = &power_green;
  15                 led-failsafe = &power_red;
  16                 led-running = &power_green;
  17
  18                 led-dsl = &broadband_green;
  19                 led-internet = &internet_green;
  20                 led-wifi = &wireless_green;
  21         };
  22
  23         memory@0 {
  24                 reg = <0x0 0x4000000>;
  25         };
  26
  27         fpi@10000000 {
  28                 localbus@0 {
  29                         nor-boot@0 {
  30                                 compatible = "lantiq,nor";
  31                                 bank-width = <2>;
  32                                 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
  33                                 #address-cells = <1>;
  34                                 #size-cells = <1>;
  35
  36                                 partitions {
  37                                         compatible = "fixed-partitions";
  38                                         #address-cells = <1>;
  39                                         #size-cells = <1>;
  40
  41                                         boardconfig: partition@40000 {
  42                                                 label = "board_config";
  43                                                 reg = <0x40000 0x10000>;
  44                                                 read-only;
  45                                         };
  46                                 };
  47                         };
  48                 };
  49
  50                 gpio: pinmux@E100B10 {
  51                         pinctrl-names = "default";
  52                         pinctrl-0 = <&state_default>;
  53
  54                         state_default: pinmux {
  55                                 stp {
  56                                         lantiq,groups = "stp";
  57                                         lantiq,function = "stp";
  58                                         lantiq,open-drain = <0>;
  59                                         lantiq,output = <1>;
  60                                         lantiq,pull = <0>;
  61                                 };
  62                                 mdio {
  63                                         lantiq,groups = "mdio";
  64                                         lantiq,function = "mdio";
  65                                 };
  66                                 pci-rst {
  67                                         lantiq,pins = "io21";
  68                                         lantiq,open-drain = <0>;
  69                                         lantiq,pull = <0>;
  70                                         lantiq,output = <1>;
  71                                 };
  72                                 gphy-leds {
  73                                         lantiq,groups = "gphy0 led1", "gphy1 led0";
  74                                         lantiq,function = "gphy";
  75                                         lantiq,open-drain = <0>;
  76                                         lantiq,pull = <0>;
  77                                         lantiq,output = <1>;
  78                                 };
  79                         };
  80                 };
  81
  82                 stp: stp@E100BB0 {
  83                         compatible = "lantiq,gpio-stp-xway";
  84                         reg = <0xE100BB0 0x40>;
  85                         #gpio-cells = <2>;
  86                         gpio-controller;
  87
  88                         lantiq,shadow = <0xffff>;
  89                         lantiq,groups = <0x3>;
  90                         lantiq,dsl = <0x0>;
  91                         lantiq,phy1 = <0x0>;
  92                         lantiq,phy2 = <0x0>;
  93                         /* lantiq,rising; */
  94                 };
  95
  96                 ifxhcd@E101000 {
  97                         status = "okay";
  98                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
  99                         lantiq,portmask = <0x3>;
 100                 };
 101
 102                 ifxhcd@E106000 {
 103                         status = "okay";
 104                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
 105                 };
 106
 107                 pcie@d900000 {
 108                         status = "disabled";
 109                 };
 110         };
 111
 112         gphy-xrx200 {
 113                 compatible = "lantiq,phy-xrx200";
 114                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 115                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 116                 phys = [ 00 01 ];
 117         };
 118
 119         gpio-keys-polled {
 120                 compatible = "gpio-keys-polled";
 121                 #address-cells = <1>;
 122                 #size-cells = <0>;
 123                 poll-interval = <100>;
 124                 reset {
 125                         label = "reset";
 126                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 127                         linux,code = <KEY_RESTART>;
 128                 };
 129                 eco {
 130                         label = "eco";
 131                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
 132                         linux,code = <KEY_RFKILL>;
 133                 };
 134                 rfkill {
 135                         label = "rfkill";
 136                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
 137                         linux,code = <KEY_RFKILL>;
 138                 };
 139                 wps {
 140                         label = "wps";
 141                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 142                         linux,code = <KEY_WPS_BUTTON>;
 143                 };
 144         };
 145
 146         gpio-leds {
 147                 compatible = "gpio-leds";
 148
 149                 eco {
 150                         label = "vgv7519:blue:eco";
 151                         gpios = <&stp 2 GPIO_ACTIVE_LOW>;
 152                 };
 153                 wps_red {
 154                         label = "vgv7519:red:wps";
 155                         gpios = <&stp 3 GPIO_ACTIVE_LOW>;
 156                 };
 157                 wps_green {
 158                         label = "vgv7519:green:wps";
 159                         gpios = <&stp 4 GPIO_ACTIVE_LOW>;
 160                 };
 161                 upgrade {
 162                         label = "vgv7519:blue:upgrade";
 163                         gpios = <&stp 5 GPIO_ACTIVE_LOW>;
 164                 };
 165                 tv {
 166                         label = "vgv7519:green:tv";
 167                         gpios = <&stp 6 GPIO_ACTIVE_LOW>;
 168                 };
 169                 internet_green: internet_green {
 170                         label = "vgv7519:green:internet";
 171                         gpios = <&stp 7 GPIO_ACTIVE_LOW>;
 172                 };
 173                 internet_red {
 174                         label = "vgv7519:red:internet";
 175                         gpios = <&stp 8 GPIO_ACTIVE_LOW>;
 176                 };
 177                 broadband_red {
 178                         label = "vgv7519:red:broadband";
 179                         gpios = <&stp 9 GPIO_ACTIVE_LOW>;
 180                 };
 181                 broadband_green: broadband_green {
 182                         label = "vgv7519:green:broadband";
 183                         gpios = <&stp 10 GPIO_ACTIVE_LOW>;
 184                 };
 185                 voice {
 186                         label = "vgv7519:green:voice";
 187                         gpios = <&stp 11 GPIO_ACTIVE_LOW>;
 188                 };
 189                 wireless_red {
 190                         label = "vgv7519:red:wireless";
 191                         gpios = <&stp 12 GPIO_ACTIVE_LOW>;
 192                 };
 193                 wireless_green: wireless_green {
 194                         label = "vgv7519:green:wireless";
 195                         gpios = <&stp 13 GPIO_ACTIVE_LOW>;
 196                 };
 197                 power_green: power2 {
 198                         label = "vgv7519:green:power";
 199                         gpios = <&stp 14 GPIO_ACTIVE_LOW>;
 200                         default-state = "keep";
 201                 };
 202                 power_red: power {
 203                         label = "vgv7519:red:power";
 204                         gpios = <&stp 15 GPIO_ACTIVE_LOW>;
 205                 };
 206         };
 207 };
 208
 209 &pci0 {
 210         status = "okay";
 211         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 212
 213         wifi@1814,3091 {
 214                 compatible = "pci1814,3091";
 215                 reg = <0x7000 0 0 0 0>;
 216                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 217                 ralink,mtd-eeprom-swap;
 218                 mtd-mac-address = <&boardconfig 0x16>;
 219                 mtd-mac-address-increment = <1>;
 220         };
 221 };
 222
 223 &eth0 {
 224         lan: interface@0 {
 225                 compatible = "lantiq,xrx200-pdi";
 226                 #address-cells = <1>;
 227                 #size-cells = <0>;
 228                 reg = <0>;
 229                 mtd-mac-address = <&boardconfig 0x16>;
 230                 mtd-mac-address-increment = <1>;
 231                 lantiq,switch;
 232
 233                 ethernet@0 {
 234                         compatible = "lantiq,xrx200-pdi-port";
 235                         reg = <0>;
 236                         phy-mode = "rgmii";
 237                         phy-handle = <&phy0>;
 238                 };
 239                 ethernet@1 {
 240                         compatible = "lantiq,xrx200-pdi-port";
 241                         reg = <1>;
 242                         phy-mode = "rgmii";
 243                         phy-handle = <&phy1>;
 244                 };
 245                 ethernet@2 {
 246                         compatible = "lantiq,xrx200-pdi-port";
 247                         reg = <2>;
 248                         phy-mode = "gmii";
 249                         phy-handle = <&phy11>;
 250                 };
 251                 ethernet@4 {
 252                         compatible = "lantiq,xrx200-pdi-port";
 253                         reg = <4>;
 254                         phy-mode = "gmii";
 255                         phy-handle = <&phy13>;
 256                 };
 257         };
 258
 259         wan: interface@1 {
 260                 compatible = "lantiq,xrx200-pdi";
 261                 #address-cells = <1>;
 262                 #size-cells = <0>;
 263                 reg = <1>;
 264                 mtd-mac-address = <&boardconfig 0x16>;
 265                 lantiq,wan;
 266
 267                 ethernet@5 {
 268                         compatible = "lantiq,xrx200-pdi-port";
 269                         reg = <5>;
 270                         phy-mode = "rgmii";
 271                         phy-handle = <&phy5>;
 272                 };
 273         };
 274
 275         mdio@0 {
 276                 #address-cells = <1>;
 277                 #size-cells = <0>;
 278                 compatible = "lantiq,xrx200-mdio";
 279                 phy0: ethernet-phy@0 {
 280                         reg = <0x0>;
 281                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 282                 };
 283                 phy1: ethernet-phy@1 {
 284                         reg = <0x1>;
 285                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 286                 };
 287                 phy5: ethernet-phy@5 {
 288                         reg = <0x5>;
 289                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 290                 };
 291                 phy11: ethernet-phy@11 {
 292                         reg = <0x11>;
 293                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 294                 };
 295                 phy13: ethernet-phy@13 {
 296                         reg = <0x13>;
 297                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 298                 };
 299         };
 300 };