a2242bb54df8574cd26768cb132b105bb730b139
[librecmc/librecmc.git] / target / linux / lantiq / dts / VGV7519.dtsi
1 #include "vr9.dtsi"
2
3 / {
4
5         model = "VGV7519 - KPN Experiabox V8";
6
7         chosen {
8                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
9         };
10
11         aliases {
12                 led-boot = &power_green;
13                 led-failsafe = &power_red;
14                 led-running = &power_green;
15
16                 led-dsl = &broadband_green;
17                 led-internet = &internet_green;
18                 led-wifi = &wireless_green;
19         };
20
21         memory@0 {
22                 reg = <0x0 0x4000000>;
23         };
24
25         fpi@10000000 {
26                 localbus@0 {
27                         nor-boot@0 {
28                                 compatible = "lantiq,nor";
29                                 bank-width = <2>;
30                                 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
31                                 #address-cells = <1>;
32                                 #size-cells = <1>;
33
34                                 partitions {
35                                         compatible = "fixed-partitions";
36                                         #address-cells = <1>;
37                                         #size-cells = <1>;
38
39                                         boardconfig: partition@40000 {
40                                                 label = "board_config";
41                                                 reg = <0x40000 0x10000>;
42                                                 read-only;
43                                         };
44                                 };
45                         };
46                 };
47
48                 gpio: pinmux@E100B10 {
49                         pinctrl-names = "default";
50                         pinctrl-0 = <&state_default>;
51
52                         state_default: pinmux {
53                                 stp {
54                                         lantiq,groups = "stp";
55                                         lantiq,function = "stp";
56                                         lantiq,open-drain = <0>;
57                                         lantiq,output = <1>;
58                                         lantiq,pull = <0>;
59                                 };
60                                 mdio {
61                                         lantiq,groups = "mdio";
62                                         lantiq,function = "mdio";
63                                 };
64                                 pci-rst {
65                                         lantiq,pins = "io21";
66                                         lantiq,open-drain = <0>;
67                                         lantiq,pull = <0>;
68                                         lantiq,output = <1>;
69                                 };
70                                 gphy-leds {
71                                         lantiq,groups = "gphy0 led1", "gphy1 led0";
72                                         lantiq,function = "gphy";
73                                         lantiq,open-drain = <0>;
74                                         lantiq,pull = <0>;
75                                         lantiq,output = <1>;
76                                 };
77                         };
78                 };
79
80                 stp: stp@E100BB0 {
81                         compatible = "lantiq,gpio-stp-xway";
82                         reg = <0xE100BB0 0x40>;
83                         #gpio-cells = <2>;
84                         gpio-controller;
85
86                         lantiq,shadow = <0xffff>;
87                         lantiq,groups = <0x3>;
88                         lantiq,dsl = <0x0>;
89                         lantiq,phy1 = <0x0>;
90                         lantiq,phy2 = <0x0>;
91                         /* lantiq,rising; */
92                 };
93
94                 ifxhcd@E101000 {
95                         status = "okay";
96                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
97                         lantiq,portmask = <0x3>;
98                 };
99
100                 ifxhcd@E106000 {
101                         status = "okay";
102                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
103                 };
104
105                 pci@E105400 {
106                         status = "okay";
107                         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
108                 };
109
110                 pcie@d900000 {
111                         status = "disabled";
112                 };
113         };
114
115         gphy-xrx200 {
116                 compatible = "lantiq,phy-xrx200";
117                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
118                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
119                 phys = [ 00 01 ];
120         };
121
122         ralink_eep {
123                 compatible = "ralink,eeprom";
124                 ralink,eeprom = "RT2860.eeprom";
125         };
126
127         gpio-keys-polled {
128                 compatible = "gpio-keys-polled";
129                 #address-cells = <1>;
130                 #size-cells = <0>;
131                 poll-interval = <100>;
132                 reset {
133                         label = "reset";
134                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
135                         linux,code = <KEY_RESTART>;
136                 };
137                 eco {
138                         label = "eco";
139                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
140                         linux,code = <KEY_RFKILL>;
141                 };
142                 rfkill {
143                         label = "rfkill";
144                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
145                         linux,code = <KEY_RFKILL>;
146                 };
147                 wps {
148                         label = "wps";
149                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
150                         linux,code = <KEY_WPS_BUTTON>;
151                 };
152         };
153
154         gpio-leds {
155                 compatible = "gpio-leds";
156
157                 eco {
158                         label = "vgv7519:blue:eco";
159                         gpios = <&stp 2 GPIO_ACTIVE_LOW>;
160                 };
161                 wps_red {
162                         label = "vgv7519:red:wps";
163                         gpios = <&stp 3 GPIO_ACTIVE_LOW>;
164                 };
165                 wps_green {
166                         label = "vgv7519:green:wps";
167                         gpios = <&stp 4 GPIO_ACTIVE_LOW>;
168                 };
169                 upgrade {
170                         label = "vgv7519:blue:upgrade";
171                         gpios = <&stp 5 GPIO_ACTIVE_LOW>;
172                 };
173                 tv {
174                         label = "vgv7519:green:tv";
175                         gpios = <&stp 6 GPIO_ACTIVE_LOW>;
176                 };
177                 internet_green: internet_green {
178                         label = "vgv7519:green:internet";
179                         gpios = <&stp 7 GPIO_ACTIVE_LOW>;
180                 };
181                 internet_red {
182                         label = "vgv7519:red:internet";
183                         gpios = <&stp 8 GPIO_ACTIVE_LOW>;
184                 };
185                 broadband_red {
186                         label = "vgv7519:red:broadband";
187                         gpios = <&stp 9 GPIO_ACTIVE_LOW>;
188                 };
189                 broadband_green: broadband_green {
190                         label = "vgv7519:green:broadband";
191                         gpios = <&stp 10 GPIO_ACTIVE_LOW>;
192                 };
193                 voice {
194                         label = "vgv7519:green:voice";
195                         gpios = <&stp 11 GPIO_ACTIVE_LOW>;
196                 };
197                 wireless_red {
198                         label = "vgv7519:red:wireless";
199                         gpios = <&stp 12 GPIO_ACTIVE_LOW>;
200                 };
201                 wireless_green: wireless_green {
202                         label = "vgv7519:green:wireless";
203                         gpios = <&stp 13 GPIO_ACTIVE_LOW>;
204                 };
205                 power_green: power2 {
206                         label = "vgv7519:green:power";
207                         gpios = <&stp 14 GPIO_ACTIVE_LOW>;
208                         default-state = "keep";
209                 };
210                 power_red: power {
211                         label = "vgv7519:red:power";
212                         gpios = <&stp 15 GPIO_ACTIVE_LOW>;
213                 };
214         };
215 };
216
217 &eth0 {
218         lan: interface@0 {
219                 compatible = "lantiq,xrx200-pdi";
220                 #address-cells = <1>;
221                 #size-cells = <0>;
222                 reg = <0>;
223                 mtd-mac-address = <&boardconfig 0x16>;
224                 mtd-mac-address-increment = <1>;
225                 lantiq,switch;
226
227                 ethernet@0 {
228                         compatible = "lantiq,xrx200-pdi-port";
229                         reg = <0>;
230                         phy-mode = "rgmii";
231                         phy-handle = <&phy0>;
232                 };
233                 ethernet@1 {
234                         compatible = "lantiq,xrx200-pdi-port";
235                         reg = <1>;
236                         phy-mode = "rgmii";
237                         phy-handle = <&phy1>;
238                 };
239                 ethernet@2 {
240                         compatible = "lantiq,xrx200-pdi-port";
241                         reg = <2>;
242                         phy-mode = "gmii";
243                         phy-handle = <&phy11>;
244                 };
245                 ethernet@4 {
246                         compatible = "lantiq,xrx200-pdi-port";
247                         reg = <4>;
248                         phy-mode = "gmii";
249                         phy-handle = <&phy13>;
250                 };
251         };
252
253         wan: interface@1 {
254                 compatible = "lantiq,xrx200-pdi";
255                 #address-cells = <1>;
256                 #size-cells = <0>;
257                 reg = <1>;
258                 mtd-mac-address = <&boardconfig 0x16>;
259                 lantiq,wan;
260
261                 ethernet@5 {
262                         compatible = "lantiq,xrx200-pdi-port";
263                         reg = <5>;
264                         phy-mode = "rgmii";
265                         phy-handle = <&phy5>;
266                 };
267         };
268
269         mdio@0 {
270                 #address-cells = <1>;
271                 #size-cells = <0>;
272                 compatible = "lantiq,xrx200-mdio";
273                 phy0: ethernet-phy@0 {
274                         reg = <0x0>;
275                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
276                 };
277                 phy1: ethernet-phy@1 {
278                         reg = <0x1>;
279                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
280                 };
281                 phy5: ethernet-phy@5 {
282                         reg = <0x5>;
283                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
284                 };
285                 phy11: ethernet-phy@11 {
286                         reg = <0x11>;
287                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
288                 };
289                 phy13: ethernet-phy@13 {
290                         reg = <0x13>;
291                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
292                 };
293         };
294 };