3 #include <dt-bindings/input/input.h>
7 bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp";
11 led-boot = &power_green;
12 led-failsafe = &power_red;
13 led-running = &power_green;
15 led-dsl = &broadband_green;
16 led-internet = &internet_green;
17 led-wifi = &wireless_green;
23 gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay
24 &gpio 31 GPIO_ACTIVE_HIGH //still unknown
25 &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic?
30 reg = <0x0 0x4000000>;
36 compatible = "lantiq,nor";
38 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
43 compatible = "fixed-partitions";
47 boardconfig: partition@40000 {
48 label = "board_config";
49 reg = <0x40000 0x10000>;
56 gpio: pinmux@E100B10 {
57 pinctrl-names = "default";
58 pinctrl-0 = <&state_default>;
60 state_default: pinmux {
62 lantiq,groups = "stp";
63 lantiq,function = "stp";
64 lantiq,open-drain = <0>;
69 lantiq,groups = "mdio";
70 lantiq,function = "mdio";
74 lantiq,open-drain = <0>;
79 lantiq,groups = "gphy0 led1", "gphy1 led0";
80 lantiq,function = "gphy";
81 lantiq,open-drain = <0>;
89 compatible = "lantiq,gpio-stp-xway";
90 reg = <0xE100BB0 0x40>;
94 lantiq,shadow = <0xffff>;
95 lantiq,groups = <0x3>;
104 gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
105 lantiq,portmask = <0x3>;
110 gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
119 compatible = "lantiq,phy-xrx200";
120 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
121 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
126 compatible = "gpio-keys-polled";
127 #address-cells = <1>;
129 poll-interval = <100>;
132 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
133 linux,code = <KEY_RESTART>;
137 gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
138 linux,code = <BTN_0>;
142 gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
143 linux,code = <KEY_RFKILL>;
147 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
148 linux,code = <KEY_WPS_BUTTON>;
153 compatible = "gpio-leds";
156 label = "vgv7519:blue:eco";
157 gpios = <&stp 2 GPIO_ACTIVE_LOW>;
160 label = "vgv7519:red:wps";
161 gpios = <&stp 3 GPIO_ACTIVE_LOW>;
164 label = "vgv7519:green:wps";
165 gpios = <&stp 4 GPIO_ACTIVE_LOW>;
168 label = "vgv7519:blue:upgrade";
169 gpios = <&stp 5 GPIO_ACTIVE_LOW>;
172 label = "vgv7519:green:tv";
173 gpios = <&stp 6 GPIO_ACTIVE_LOW>;
175 internet_green: internet_green {
176 label = "vgv7519:green:internet";
177 gpios = <&stp 7 GPIO_ACTIVE_LOW>;
180 label = "vgv7519:red:internet";
181 gpios = <&stp 8 GPIO_ACTIVE_LOW>;
184 label = "vgv7519:red:broadband";
185 gpios = <&stp 9 GPIO_ACTIVE_LOW>;
187 broadband_green: broadband_green {
188 label = "vgv7519:green:broadband";
189 gpios = <&stp 10 GPIO_ACTIVE_LOW>;
192 label = "vgv7519:green:voice";
193 gpios = <&stp 11 GPIO_ACTIVE_LOW>;
196 label = "vgv7519:red:wireless";
197 gpios = <&stp 12 GPIO_ACTIVE_LOW>;
199 wireless_green: wireless_green {
200 label = "vgv7519:green:wireless";
201 gpios = <&stp 13 GPIO_ACTIVE_LOW>;
203 power_green: power2 {
204 label = "vgv7519:green:power";
205 gpios = <&stp 14 GPIO_ACTIVE_LOW>;
206 default-state = "keep";
209 label = "vgv7519:red:power";
210 gpios = <&stp 15 GPIO_ACTIVE_LOW>;
217 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
220 compatible = "pci1814,3091";
221 reg = <0x7000 0 0 0 0>;
222 ralink,mtd-eeprom = <&boardconfig 0x410>;
223 ralink,mtd-eeprom-swap;
224 mtd-mac-address = <&boardconfig 0x16>;
225 mtd-mac-address-increment = <1>;
231 compatible = "lantiq,xrx200-pdi";
232 #address-cells = <1>;
235 mtd-mac-address = <&boardconfig 0x16>;
236 mtd-mac-address-increment = <1>;
240 compatible = "lantiq,xrx200-pdi-port";
243 phy-handle = <&phy0>;
246 compatible = "lantiq,xrx200-pdi-port";
249 phy-handle = <&phy1>;
252 compatible = "lantiq,xrx200-pdi-port";
255 phy-handle = <&phy11>;
258 compatible = "lantiq,xrx200-pdi-port";
261 phy-handle = <&phy13>;
266 compatible = "lantiq,xrx200-pdi";
267 #address-cells = <1>;
270 mtd-mac-address = <&boardconfig 0x16>;
274 compatible = "lantiq,xrx200-pdi-port";
277 phy-handle = <&phy5>;
282 #address-cells = <1>;
284 compatible = "lantiq,xrx200-mdio";
285 phy0: ethernet-phy@0 {
287 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
289 phy1: ethernet-phy@1 {
291 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
293 phy5: ethernet-phy@5 {
295 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
297 phy11: ethernet-phy@11 {
299 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
301 phy13: ethernet-phy@13 {
303 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";