5 model = "VGV7519 - KPN Experiabox V8";
8 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
12 reg = <0x0 0x4000000>;
18 compatible = "lantiq,fpi", "simple-bus";
19 ranges = <0x0 0x10000000 0xEEFFFFF>;
20 reg = <0x10000000 0xEF00000>;
25 compatible = "lantiq,localbus", "simple-bus";
28 gpio: pinmux@E100B10 {
29 compatible = "lantiq,pinctrl-xr9";
30 pinctrl-names = "default";
31 pinctrl-0 = <&state_default>;
33 interrupt-parent = <&icu0>;
34 interrupts = <166 135 66 40 41 42 38>;
38 reg = <0xE100B10 0xA0>;
40 state_default: pinmux {
42 lantiq,groups = "stp";
43 lantiq,function = "stp";
46 lantiq,groups = "spi";
47 lantiq,function = "spi";
50 lantiq,groups = "mdio";
51 lantiq,function = "mdio";
54 lantiq,pins = "io7", "io44";
59 lantiq,pins = "io4", "io5", "io6";
60 lantiq,open-drain = <0>;
66 lantiq,open-drain = <0>;
71 lantiq,groups = "gphy0 led1", "gphy1 led0";
72 lantiq,function = "gphy";
73 lantiq,open-drain = <0>;
83 compatible = "lantiq,xrx200-net";
84 reg = < 0xE108000 0x3000 /* switch */
85 0xE10B100 0x70 /* mdio */
86 0xE10B1D8 0x30 /* mii */
87 0xE10B308 0x30 /* pmac */
89 interrupt-parent = <&icu0>;
93 compatible = "lantiq,xrx200-pdi";
97 mac-address = [ 00 11 22 33 44 55 ];
100 compatible = "lantiq,xrx200-pdi-port";
103 phy-handle = <&phy0>;
106 compatible = "lantiq,xrx200-pdi-port";
109 phy-handle = <&phy1>;
112 compatible = "lantiq,xrx200-pdi-port";
115 phy-handle = <&phy11>;
118 compatible = "lantiq,xrx200-pdi-port";
121 phy-handle = <&phy13>;
126 compatible = "lantiq,xrx200-pdi";
127 #address-cells = <1>;
130 mac-address = [ 00 11 22 33 44 56 ];
133 compatible = "lantiq,xrx200-pdi-port";
136 phy-handle = <&phy5>;
141 #address-cells = <1>;
143 compatible = "lantiq,xrx200-mdio";
144 phy0: ethernet-phy@0 {
146 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
147 lantiq,c45-reg-init = <1 0 0 0>;
149 phy1: ethernet-phy@1 {
151 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
152 lantiq,c45-reg-init = <1 0 0 0>;
154 phy5: ethernet-phy@5 {
156 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
157 lantiq,c45-reg-init = <1 0 0 0>;
159 phy11: ethernet-phy@11 {
161 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
162 lantiq,c45-reg-init = <1 0 0 0>;
164 phy13: ethernet-phy@13 {
166 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
167 lantiq,c45-reg-init = <1 0 0 0>;
173 compatible = "lantiq,gpio-stp-xway";
174 reg = <0xE100BB0 0x40>;
178 lantiq,shadow = <0xffff>;
179 lantiq,groups = <0x3>;
188 gpios = <&gpio 32 0>;
189 lantiq,portmask = <0x3>;
194 #address-cells = <3>;
196 #interrupt-cells = <1>;
197 compatible = "lantiq,pci-xway";
198 bus-range = <0x0 0x0>;
199 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
200 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
201 reg = <0x7000000 0x8000 /* config space */
202 0xE105400 0x400>; /* pci bridge */
203 lantiq,bus-clock = <33333333>;
204 /*lantiq,external-clock;*/
205 lantiq,delay-hi = <0>; /* 0ns delay */
206 lantiq,delay-lo = <0>; /* 0.0ns delay */
207 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
209 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
211 gpio-reset = <&gpio 21 0>;
212 req-mask = <0x1>; /* GNT1 */
221 compatible = "lantiq,phy-xrx200";
222 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
223 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
228 compatible = "ralink,eeprom";
229 ralink,eeprom = "RT2860.eeprom";
233 compatible = "gpio-keys-polled";
234 #address-cells = <1>;
236 poll-interval = <100>;
240 linux,code = <0x198>;
244 gpios = <&gpio 41 1>;
249 gpios = <&gpio 45 1>;
254 gpios = <&gpio 10 1>;
255 linux,code = <0x211>;
260 compatible = "gpio-leds";
270 wps_yellow { /* yellow */
271 label = "wps_yellow";
282 internet_yellow { /* yellow */
283 label = "internet_yellow";
286 internet_red { /* red */
287 label = "internet_red";
290 broadband_red { /* red */
291 label = "broadband_red";
294 broadband_yellow { /* yellow */
295 label = "broadband_yellow";
302 wireless_red { /* red */
303 label = "wireless_red";
306 wireless_yellow { /* yellow */
307 label = "wireless_yellow";
310 power2 { /* yellow */
317 default-state = "on";