4 model = "VGV7510KW22 - o2 Box 6431";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 failsafe = &power_red;
12 running = &power_green;
15 internet = &internet_green;
21 reg = <0x0 0x4000000>;
27 compatible = "lantiq,nor";
29 reg = <0 0x0 0x1000000>;
33 boardconfig: partition@fe0000 {
34 label = "board_config";
35 reg = <0xfe0000 0x20000>;
41 gpio: pinmux@E100B10 {
42 pinctrl-names = "default";
43 pinctrl-0 = <&state_default>;
45 state_default: pinmux {
52 lantiq,groups = "gphy0 led1",
53 "gphy1 led0", "gphy1 led1";
54 lantiq,function = "gphy";
55 lantiq,open-drain = <0>;
60 lantiq,groups = "stp";
61 lantiq,function = "stp";
63 lantiq,open-drain = <0>;
67 lantiq,groups = "mdio";
68 lantiq,function = "mdio";
72 lantiq,open-drain = <0>;
77 lantiq,groups = "spi";
78 lantiq,function = "spi";
86 compatible = "lantiq,xrx200-net";
87 reg = < 0xE108000 0x3000 /* switch */
88 0xE10B100 0x70 /* mdio */
89 0xE10B1D8 0x30 /* mii */
90 0xE10B308 0x30 /* pmac */
92 interrupt-parent = <&icu0>;
96 compatible = "lantiq,xrx200-pdi";
100 mtd-mac-address = <&boardconfig 0x16>;
104 compatible = "lantiq,xrx200-pdi-port";
107 phy-handle = <&phy11>;
110 compatible = "lantiq,xrx200-pdi-port";
113 phy-handle = <&phy12>;
116 compatible = "lantiq,xrx200-pdi-port";
119 phy-handle = <&phy13>;
122 compatible = "lantiq,xrx200-pdi-port";
125 phy-handle = <&phy14>;
130 #address-cells = <1>;
132 compatible = "lantiq,xrx200-mdio";
134 phy11: ethernet-phy@11 {
136 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
138 phy12: ethernet-phy@12 {
140 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
142 phy13: ethernet-phy@13 {
144 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
146 phy14: ethernet-phy@14 {
148 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
154 compatible = "lantiq,gpio-stp-xway";
155 reg = <0xE100BB0 0x40>;
159 lantiq,shadow = <0xff>;
160 lantiq,groups = <0x1>;
163 lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */
168 gpios = <&gpio 47 0>;
173 lantiq,bus-clock = <33333333>;
174 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
176 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
178 gpio-reset = <&gpio 21 0>;
179 req-mask = <0x1>; /* GNT1 */
188 compatible = "lantiq,phy-xrx200";
189 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
190 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
195 compatible = "ralink,eeprom";
196 ralink,eeprom = "RT3062.eeprom";
200 compatible = "gpio-keys-polled";
201 #address-cells = <1>;
203 poll-interval = <100>;
208 linux,code = <0x198>;
214 linux,code = <0x211>;
219 compatible = "gpio-leds";
222 label = "vgv7510kw22:green:dsl";
227 label = "vgv7510kw22:red:internet";
228 gpios = <&gpio 10 1>;
232 label = "vgv7510kw22:red:info";
233 gpios = <&gpio 12 1>;
237 label = "vgv7510kw22:green:power";
238 gpios = <&gpio 14 1>;
239 default-state = "keep";
243 label = "vgv7510kw22:green:info";
244 gpios = <&gpio 15 1>;
247 internet_green: internet_green {
248 label = "vgv7510kw22:green:internet";
249 gpios = <&gpio 19 1>;
253 label = "vgv7510kw22:green:wlan";
254 gpios = <&gpio 20 1>;
258 label = "vgv7510kw22:red:power";
259 gpios = <&gpio 28 1>;
263 label = "vgv7510kw22:green:telefon";
264 gpios = <&gpio 29 1>;