4 model = "VGV7510KW22 - o2 Box 6431";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 led-boot = &power_green;
12 led-failsafe = &power_red;
13 led-running = &power_green;
16 led-internet = &internet_green;
21 reg = <0x0 0x4000000>;
27 compatible = "lantiq,nor";
29 reg = <0 0x0 0x1000000>;
34 compatible = "fixed-partitions";
38 boardconfig: partition@fe0000 {
39 label = "board_config";
40 reg = <0xfe0000 0x20000>;
47 gpio: pinmux@E100B10 {
48 pinctrl-names = "default";
49 pinctrl-0 = <&state_default>;
51 state_default: pinmux {
53 lantiq,groups = "gphy0 led0", "gphy0 led1",
54 "gphy1 led0", "gphy1 led1";
55 lantiq,function = "gphy";
56 lantiq,open-drain = <0>;
61 lantiq,groups = "mdio";
62 lantiq,function = "mdio";
66 lantiq,open-drain = <0>;
75 gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
80 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
89 compatible = "lantiq,phy-xrx200";
90 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
91 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
96 compatible = "ralink,eeprom";
97 ralink,eeprom = "RT3062.eeprom";
101 compatible = "gpio-keys-polled";
102 #address-cells = <1>;
104 poll-interval = <100>;
108 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
109 linux,code = <KEY_RESTART>;
114 gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
115 linux,code = <KEY_WPS_BUTTON>;
120 compatible = "gpio-leds";
123 label = "vgv7510kw22:green:dsl";
124 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
128 label = "vgv7510kw22:red:internet";
129 gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
133 label = "vgv7510kw22:red:info";
134 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
138 label = "vgv7510kw22:green:power";
139 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
140 default-state = "keep";
144 label = "vgv7510kw22:green:info";
145 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
148 internet_green: internet_green {
149 label = "vgv7510kw22:green:internet";
150 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
154 label = "vgv7510kw22:green:wlan";
155 gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
159 label = "vgv7510kw22:red:power";
160 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
164 label = "vgv7510kw22:green:telefon";
165 gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
172 compatible = "lantiq,xrx200-pdi";
173 #address-cells = <1>;
176 mtd-mac-address = <&boardconfig 0x16>;
180 compatible = "lantiq,xrx200-pdi-port";
183 phy-handle = <&phy11>;
186 compatible = "lantiq,xrx200-pdi-port";
189 phy-handle = <&phy12>;
192 compatible = "lantiq,xrx200-pdi-port";
195 phy-handle = <&phy13>;
198 compatible = "lantiq,xrx200-pdi-port";
201 phy-handle = <&phy14>;
206 compatible = "lantiq,xrx200-pdi";
207 #address-cells = <1>;
210 mtd-mac-address = <&boardconfig 0x16>;
211 mtd-mac-address-increment = <3>;
215 compatible = "lantiq,xrx200-pdi-port";
218 phy-handle = <&phy1>;
223 #address-cells = <1>;
225 compatible = "lantiq,xrx200-mdio";
227 phy1: ethernet-phy@1 {
229 compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
232 phy11: ethernet-phy@11 {
234 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
236 phy12: ethernet-phy@12 {
238 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
240 phy13: ethernet-phy@13 {
242 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
244 phy14: ethernet-phy@14 {
246 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";