4 model = "VGV7510KW22 - o2 Box 6431";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 failsafe = &power_red;
12 running = &power_green;
15 internet = &internet_green;
21 reg = <0x0 0x4000000>;
27 compatible = "lantiq,nor";
29 reg = <0 0x0 0x1000000>;
33 boardconfig: partition@fe0000 {
34 label = "board_config";
35 reg = <0xfe0000 0x20000>;
41 gpio: pinmux@E100B10 {
42 pinctrl-names = "default";
43 pinctrl-0 = <&state_default>;
45 state_default: pinmux {
52 lantiq,groups = "gphy0 led1",
53 "gphy1 led0", "gphy1 led1";
54 lantiq,function = "gphy";
55 lantiq,open-drain = <0>;
60 lantiq,groups = "stp";
61 lantiq,function = "stp";
63 lantiq,open-drain = <0>;
67 lantiq,groups = "mdio";
68 lantiq,function = "mdio";
72 lantiq,open-drain = <0>;
77 lantiq,groups = "spi_di", "spi_do", "spi_clk";
78 lantiq,function = "spi";
84 compatible = "lantiq,gpio-stp-xway";
85 reg = <0xE100BB0 0x40>;
89 lantiq,shadow = <0xff>;
90 lantiq,groups = <0x1>;
93 lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */
103 lantiq,bus-clock = <33333333>;
104 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
106 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
108 gpio-reset = <&gpio 21 0>;
109 req-mask = <0x1>; /* GNT1 */
118 compatible = "lantiq,phy-xrx200";
119 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
120 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
125 compatible = "ralink,eeprom";
126 ralink,eeprom = "RT3062.eeprom";
130 compatible = "gpio-keys-polled";
131 #address-cells = <1>;
133 poll-interval = <100>;
138 linux,code = <0x198>;
144 linux,code = <0x211>;
149 compatible = "gpio-leds";
152 label = "vgv7510kw22:green:dsl";
157 label = "vgv7510kw22:red:internet";
158 gpios = <&gpio 10 1>;
162 label = "vgv7510kw22:red:info";
163 gpios = <&gpio 12 1>;
167 label = "vgv7510kw22:green:power";
168 gpios = <&gpio 14 1>;
169 default-state = "keep";
173 label = "vgv7510kw22:green:info";
174 gpios = <&gpio 15 1>;
177 internet_green: internet_green {
178 label = "vgv7510kw22:green:internet";
179 gpios = <&gpio 19 1>;
183 label = "vgv7510kw22:green:wlan";
184 gpios = <&gpio 20 1>;
188 label = "vgv7510kw22:red:power";
189 gpios = <&gpio 28 1>;
193 label = "vgv7510kw22:green:telefon";
194 gpios = <&gpio 29 1>;
201 compatible = "lantiq,xrx200-pdi";
202 #address-cells = <1>;
205 mtd-mac-address = <&boardconfig 0x16>;
209 compatible = "lantiq,xrx200-pdi-port";
212 phy-handle = <&phy11>;
215 compatible = "lantiq,xrx200-pdi-port";
218 phy-handle = <&phy12>;
221 compatible = "lantiq,xrx200-pdi-port";
224 phy-handle = <&phy13>;
227 compatible = "lantiq,xrx200-pdi-port";
230 phy-handle = <&phy14>;
235 #address-cells = <1>;
237 compatible = "lantiq,xrx200-mdio";
239 phy11: ethernet-phy@11 {
241 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
243 phy12: ethernet-phy@12 {
245 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
247 phy13: ethernet-phy@13 {
249 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
251 phy14: ethernet-phy@14 {
253 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";