target/linux/lantiq/dts/VGV7510KW22.dtsi

   1 #include "vr9.dtsi"
   2
   3 / {
   4         model = "VGV7510KW22 - o2 Box 6431";
   5
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   8         };
   9
  10         aliases {
  11                 led-boot = &power_green;
  12                 led-failsafe = &power_red;
  13                 led-running = &power_green;
  14
  15                 led-dsl = &dsl;
  16                 led-internet = &internet_green;
  17                 led-wifi = &wifi;
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x4000000>;
  22         };
  23
  24         fpi@10000000 {
  25                 localbus@0 {
  26                         nor-boot@0 {
  27                                 compatible = "lantiq,nor";
  28                                 bank-width = <2>;
  29                                 reg = <0 0x0 0x1000000>;
  30                                 #address-cells = <1>;
  31                                 #size-cells = <1>;
  32
  33                                 partitions {
  34                                         compatible = "fixed-partitions";
  35                                         #address-cells = <1>;
  36                                         #size-cells = <1>;
  37
  38                                         boardconfig: partition@fe0000 {
  39                                                 label = "board_config";
  40                                                 reg = <0xfe0000 0x20000>;
  41                                                 read-only;
  42                                         };
  43                                 };
  44                         };
  45                 };
  46
  47                 gpio: pinmux@E100B10 {
  48                         pinctrl-names = "default";
  49                         pinctrl-0 = <&state_default>;
  50
  51                         state_default: pinmux {
  52                                 gphy-leds {
  53                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  54                                                         "gphy1 led0", "gphy1 led1";
  55                                         lantiq,function = "gphy";
  56                                         lantiq,open-drain = <0>;
  57                                         lantiq,pull = <2>;
  58                                         lantiq,output = <1>;
  59                                 };
  60                                 mdio {
  61                                         lantiq,groups = "mdio";
  62                                         lantiq,function = "mdio";
  63                                 };
  64                                 pci-rst {
  65                                         lantiq,pins = "io21";
  66                                         lantiq,open-drain = <0>;
  67                                         lantiq,pull = <0>;
  68                                         lantiq,output = <1>;
  69                                 };
  70                         };
  71                 };
  72
  73                 ifxhcd@E101000 {
  74                         status = "okay";
  75                         gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
  76                 };
  77
  78                 pcie@d900000 {
  79                         status = "disabled";
  80                 };
  81         };
  82
  83         gphy-xrx200 {
  84                 compatible = "lantiq,phy-xrx200";
  85                 firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
  86                 firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
  87                 phys = [ 00 01 ];
  88         };
  89
  90         gpio-keys-polled {
  91                 compatible = "gpio-keys-polled";
  92                 #address-cells = <1>;
  93                 #size-cells = <0>;
  94                 poll-interval = <100>;
  95
  96                 reset {
  97                         label = "reset";
  98                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  99                         linux,code = <KEY_RESTART>;
 100                 };
 101
 102                 wps {
 103                         label = "wps";
 104                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 105                         linux,code = <KEY_WPS_BUTTON>;
 106                 };
 107         };
 108
 109         gpio-leds {
 110                 compatible = "gpio-leds";
 111
 112                 dsl: dsl {
 113                         label = "vgv7510kw22:green:dsl";
 114                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 115                 };
 116
 117                 internet_red {
 118                         label = "vgv7510kw22:red:internet";
 119                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 120                 };
 121
 122                 info_red {
 123                         label = "vgv7510kw22:red:info";
 124                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 125                 };
 126
 127                 power_green: power {
 128                         label = "vgv7510kw22:green:power";
 129                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 130                         default-state = "keep";
 131                 };
 132
 133                 info_green {
 134                         label = "vgv7510kw22:green:info";
 135                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 136                 };
 137
 138                 internet_green: internet_green {
 139                         label = "vgv7510kw22:green:internet";
 140                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 141                 };
 142
 143                 wifi: wifi {
 144                         label = "vgv7510kw22:green:wlan";
 145                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 146                 };
 147
 148                 power_red: power2 {
 149                         label = "vgv7510kw22:red:power";
 150                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 151                 };
 152
 153                 phone {
 154                         label = "vgv7510kw22:green:telefon";
 155                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
 156                 };
 157         };
 158 };
 159
 160 &pci0 {
 161         status = "okay";
 162         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 163
 164         wifi@1814,3592 {
 165                 compatible = "pci1814,3592";
 166                 reg = <0x7000 0 0 0 0>;
 167                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 168                 ralink,mtd-eeprom-swap;
 169                 mtd-mac-address = <&boardconfig 0x16>;
 170                 mtd-mac-address-increment = <1>;
 171         };
 172 };
 173
 174 &eth0 {
 175         lan: interface@0 {
 176                 compatible = "lantiq,xrx200-pdi";
 177                 #address-cells = <1>;
 178                 #size-cells = <0>;
 179                 reg = <0>;
 180                 mtd-mac-address = <&boardconfig 0x16>;
 181                 lantiq,switch;
 182
 183                 ethernet@2 {
 184                         compatible = "lantiq,xrx200-pdi-port";
 185                         reg = <2>;
 186                         phy-mode = "mii";
 187                         phy-handle = <&phy11>;
 188                 };
 189                 ethernet@3 {
 190                         compatible = "lantiq,xrx200-pdi-port";
 191                         reg = <3>;
 192                         phy-mode = "mii";
 193                         phy-handle = <&phy12>;
 194                 };
 195                 ethernet@4 {
 196                         compatible = "lantiq,xrx200-pdi-port";
 197                         reg = <4>;
 198                         phy-mode = "mii";
 199                         phy-handle = <&phy13>;
 200                 };
 201                 ethernet@5 {
 202                         compatible = "lantiq,xrx200-pdi-port";
 203                         reg = <5>;
 204                         phy-mode = "mii";
 205                         phy-handle = <&phy14>;
 206                 };
 207         };
 208
 209         wan: interface@1 {
 210                 compatible = "lantiq,xrx200-pdi";
 211                 #address-cells = <1>;
 212                 #size-cells = <0>;
 213                 reg = <1>;
 214                 mtd-mac-address = <&boardconfig 0x16>;
 215                 mtd-mac-address-increment = <3>;
 216                 lantiq,wan;
 217
 218                 ethernet@0 {
 219                         compatible = "lantiq,xrx200-pdi-port";
 220                         reg = <0>;
 221                         phy-mode = "mii";
 222                         phy-handle = <&phy1>;
 223                 };
 224         };
 225
 226         mdio@0 {
 227                 #address-cells = <1>;
 228                 #size-cells = <0>;
 229                 compatible = "lantiq,xrx200-mdio";
 230
 231                 phy1: ethernet-phy@1 {
 232                         reg = <0x1>;
 233                         compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
 234                 };
 235
 236                 phy11: ethernet-phy@11 {
 237                         reg = <0x11>;
 238                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 239                 };
 240                 phy12: ethernet-phy@12 {
 241                         reg = <0x12>;
 242                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 243                 };
 244                 phy13: ethernet-phy@13 {
 245                         reg = <0x13>;
 246                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 247                 };
 248                 phy14: ethernet-phy@14 {
 249                         reg = <0x14>;
 250                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 251                 };
 252         };
 253 };