target/linux/lantiq/dts/VGV7510KW22.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         model = "VGV7510KW22 - o2 Box 6431";
   5
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   8         };
   9
  10         aliases {
  11                 led-boot = &power_green;
  12                 led-failsafe = &power_red;
  13                 led-running = &power_green;
  14
  15                 led-dsl = &dsl;
  16                 led-internet = &internet_green;
  17                 led-wifi = &wifi;
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x4000000>;
  22         };
  23
  24         cputemp@0 {
  25                 compatible = "lantiq,cputemp";
  26         };
  27
  28         fpi@10000000 {
  29                 localbus@0 {
  30                         nor-boot@0 {
  31                                 compatible = "lantiq,nor";
  32                                 bank-width = <2>;
  33                                 reg = <0 0x0 0x1000000>;
  34                                 #address-cells = <1>;
  35                                 #size-cells = <1>;
  36
  37                                 partitions {
  38                                         compatible = "fixed-partitions";
  39                                         #address-cells = <1>;
  40                                         #size-cells = <1>;
  41
  42                                         boardconfig: partition@fe0000 {
  43                                                 label = "board_config";
  44                                                 reg = <0xfe0000 0x20000>;
  45                                                 read-only;
  46                                         };
  47                                 };
  48                         };
  49                 };
  50
  51                 gpio: pinmux@E100B10 {
  52                         pinctrl-names = "default";
  53                         pinctrl-0 = <&state_default>;
  54
  55                         state_default: pinmux {
  56                                 gphy-leds {
  57                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  58                                                         "gphy1 led0", "gphy1 led1";
  59                                         lantiq,function = "gphy";
  60                                         lantiq,open-drain = <0>;
  61                                         lantiq,pull = <2>;
  62                                         lantiq,output = <1>;
  63                                 };
  64                                 mdio {
  65                                         lantiq,groups = "mdio";
  66                                         lantiq,function = "mdio";
  67                                 };
  68                                 pci-rst {
  69                                         lantiq,pins = "io21";
  70                                         lantiq,open-drain = <0>;
  71                                         lantiq,pull = <0>;
  72                                         lantiq,output = <1>;
  73                                 };
  74                         };
  75                 };
  76
  77                 ifxhcd@E101000 {
  78                         status = "okay";
  79                         gpios = <&gpio 47 0>;
  80                 };
  81
  82                 pci@E105400 {
  83                         status = "okay";
  84                         lantiq,bus-clock = <33333333>;
  85                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
  86                         interrupt-map = <
  87                                 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
  88                                 >;
  89                         gpio-reset = <&gpio 21 0>;
  90                         req-mask = <0x1>;       /* GNT1 */
  91                 };
  92
  93                 pcie@d900000 {
  94                         status = "disabled";
  95                 };
  96         };
  97
  98         gphy-xrx200 {
  99                 compatible = "lantiq,phy-xrx200";
 100                 firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
 101                 firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
 102                 phys = [ 00 01 ];
 103         };
 104
 105         ralink_eep {
 106                 compatible = "ralink,eeprom";
 107                 ralink,eeprom = "RT3062.eeprom";
 108         };
 109
 110         gpio-keys-polled {
 111                 compatible = "gpio-keys-polled";
 112                 #address-cells = <1>;
 113                 #size-cells = <0>;
 114                 poll-interval = <100>;
 115
 116                 reset {
 117                         label = "reset";
 118                         gpios = <&gpio 6 1>;
 119                         linux,code = <0x198>;
 120                 };
 121
 122                 wps {
 123                         label = "wps";
 124                         gpios = <&gpio 9 1>;
 125                         linux,code = <0x211>;
 126                 };
 127         };
 128
 129         gpio-leds {
 130                 compatible = "gpio-leds";
 131
 132                 dsl: dsl {
 133                         label = "vgv7510kw22:green:dsl";
 134                         gpios = <&gpio 2 1>;
 135                 };
 136
 137                 internet_red {
 138                         label = "vgv7510kw22:red:internet";
 139                         gpios = <&gpio 10 1>;
 140                 };
 141
 142                 info_red {
 143                         label = "vgv7510kw22:red:info";
 144                         gpios = <&gpio 12 1>;
 145                 };
 146
 147                 power_green: power {
 148                         label = "vgv7510kw22:green:power";
 149                         gpios = <&gpio 14 1>;
 150                         default-state = "keep";
 151                 };
 152
 153                 info_green {
 154                         label = "vgv7510kw22:green:info";
 155                         gpios = <&gpio 15 1>;
 156                 };
 157
 158                 internet_green: internet_green {
 159                         label = "vgv7510kw22:green:internet";
 160                         gpios = <&gpio 19 1>;
 161                 };
 162
 163                 wifi: wifi {
 164                         label = "vgv7510kw22:green:wlan";
 165                         gpios = <&gpio 20 1>;
 166                 };
 167
 168                 power_red: power2 {
 169                         label = "vgv7510kw22:red:power";
 170                         gpios = <&gpio 28 1>;
 171                 };
 172
 173                 phone {
 174                         label = "vgv7510kw22:green:telefon";
 175                         gpios = <&gpio 29 1>;
 176                 };
 177         };
 178 };
 179
 180 &eth0 {
 181         lan: interface@0 {
 182                 compatible = "lantiq,xrx200-pdi";
 183                 #address-cells = <1>;
 184                 #size-cells = <0>;
 185                 reg = <0>;
 186                 mtd-mac-address = <&boardconfig 0x16>;
 187                 lantiq,switch;
 188
 189                 ethernet@2 {
 190                         compatible = "lantiq,xrx200-pdi-port";
 191                         reg = <2>;
 192                         phy-mode = "mii";
 193                         phy-handle = <&phy11>;
 194                 };
 195                 ethernet@3 {
 196                         compatible = "lantiq,xrx200-pdi-port";
 197                         reg = <3>;
 198                         phy-mode = "mii";
 199                         phy-handle = <&phy12>;
 200                 };
 201                 ethernet@4 {
 202                         compatible = "lantiq,xrx200-pdi-port";
 203                         reg = <4>;
 204                         phy-mode = "mii";
 205                         phy-handle = <&phy13>;
 206                 };
 207                 ethernet@5 {
 208                         compatible = "lantiq,xrx200-pdi-port";
 209                         reg = <5>;
 210                         phy-mode = "mii";
 211                         phy-handle = <&phy14>;
 212                 };
 213         };
 214
 215         wan: interface@1 {
 216                 compatible = "lantiq,xrx200-pdi";
 217                 #address-cells = <1>;
 218                 #size-cells = <0>;
 219                 reg = <1>;
 220                 mtd-mac-address = <&boardconfig 0x16>;
 221                 mtd-mac-address-increment = <2>;
 222                 lantiq,wan;
 223
 224                 ethernet@0 {
 225                         compatible = "lantiq,xrx200-pdi-port";
 226                         reg = <0>;
 227                         phy-mode = "mii";
 228                         phy-handle = <&phy1>;
 229                 };
 230         };
 231
 232         mdio@0 {
 233                 #address-cells = <1>;
 234                 #size-cells = <0>;
 235                 compatible = "lantiq,xrx200-mdio";
 236
 237                 phy1: ethernet-phy@1 {
 238                         reg = <0x1>;
 239                         compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
 240                 };
 241
 242                 phy11: ethernet-phy@11 {
 243                         reg = <0x11>;
 244                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 245                 };
 246                 phy12: ethernet-phy@12 {
 247                         reg = <0x12>;
 248                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 249                 };
 250                 phy13: ethernet-phy@13 {
 251                         reg = <0x13>;
 252                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 253                 };
 254                 phy14: ethernet-phy@14 {
 255                         reg = <0x14>;
 256                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 257                 };
 258         };
 259 };