4 model = "VGV7510KW22 - o2 Box 6431";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 internet = &internet_green;
19 reg = <0x0 0x4000000>;
25 compatible = "lantiq,nor";
27 reg = <0 0x0 0x1000000>;
31 boardconfig: partition@fe0000 {
32 label = "board_config";
33 reg = <0xfe0000 0x20000>;
39 gpio: pinmux@E100B10 {
40 pinctrl-names = "default";
41 pinctrl-0 = <&state_default>;
43 state_default: pinmux {
50 lantiq,groups = "gphy0 led1",
51 "gphy1 led0", "gphy1 led1";
52 lantiq,function = "gphy";
53 lantiq,open-drain = <0>;
58 lantiq,groups = "stp";
59 lantiq,function = "stp";
61 lantiq,open-drain = <0>;
65 lantiq,groups = "mdio";
66 lantiq,function = "mdio";
70 lantiq,open-drain = <0>;
75 lantiq,groups = "spi";
76 lantiq,function = "spi";
84 compatible = "lantiq,xrx200-net";
85 reg = < 0xE108000 0x3000 /* switch */
86 0xE10B100 0x70 /* mdio */
87 0xE10B1D8 0x30 /* mii */
88 0xE10B308 0x30 /* pmac */
90 interrupt-parent = <&icu0>;
94 compatible = "lantiq,xrx200-pdi";
98 mtd-mac-address = <&boardconfig 0x16>;
102 compatible = "lantiq,xrx200-pdi-port";
105 phy-handle = <&phy11>;
108 compatible = "lantiq,xrx200-pdi-port";
111 phy-handle = <&phy12>;
114 compatible = "lantiq,xrx200-pdi-port";
117 phy-handle = <&phy13>;
120 compatible = "lantiq,xrx200-pdi-port";
123 phy-handle = <&phy14>;
128 #address-cells = <1>;
130 compatible = "lantiq,xrx200-mdio";
132 phy11: ethernet-phy@11 {
134 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
136 phy12: ethernet-phy@12 {
138 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
140 phy13: ethernet-phy@13 {
142 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
144 phy14: ethernet-phy@14 {
146 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
152 compatible = "lantiq,gpio-stp-xway";
153 reg = <0xE100BB0 0x40>;
157 lantiq,shadow = <0xff>;
158 lantiq,groups = <0x1>;
161 lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */
166 gpios = <&gpio 47 0>;
171 lantiq,bus-clock = <33333333>;
172 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
174 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
176 gpio-reset = <&gpio 21 0>;
177 req-mask = <0x1>; /* GNT1 */
186 compatible = "lantiq,phy-xrx200";
187 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
188 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
193 compatible = "ralink,eeprom";
194 ralink,eeprom = "RT3062.eeprom";
198 compatible = "gpio-keys-polled";
199 #address-cells = <1>;
201 poll-interval = <100>;
206 linux,code = <0x198>;
212 linux,code = <0x211>;
217 compatible = "gpio-leds";
225 label = "internet_red";
226 gpios = <&gpio 10 1>;
231 gpios = <&gpio 12 1>;
235 label = "power"; /* green */
236 gpios = <&gpio 14 1>;
240 label = "info_green";
241 gpios = <&gpio 15 1>;
244 internet_green: internet_green {
245 label = "internet_green";
246 gpios = <&gpio 19 1>;
251 gpios = <&gpio 20 1>;
255 label = "power2"; /* red */
256 gpios = <&gpio 28 1>;
261 gpios = <&gpio 29 1>;