4 model = "VGV7510KW22 - o2 Box 6431";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 failsafe = &power_red;
12 running = &power_green;
15 internet = &internet_green;
21 reg = <0x0 0x4000000>;
27 compatible = "lantiq,nor";
29 reg = <0 0x0 0x1000000>;
34 compatible = "fixed-partitions";
38 boardconfig: partition@fe0000 {
39 label = "board_config";
40 reg = <0xfe0000 0x20000>;
47 gpio: pinmux@E100B10 {
48 pinctrl-names = "default";
49 pinctrl-0 = <&state_default>;
51 state_default: pinmux {
53 lantiq,groups = "gphy0 led0", "gphy0 led1",
54 "gphy1 led0", "gphy1 led1";
55 lantiq,function = "gphy";
56 lantiq,open-drain = <0>;
61 lantiq,groups = "mdio";
62 lantiq,function = "mdio";
66 lantiq,open-drain = <0>;
80 lantiq,bus-clock = <33333333>;
81 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
83 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
85 gpio-reset = <&gpio 21 0>;
86 req-mask = <0x1>; /* GNT1 */
95 compatible = "lantiq,phy-xrx200";
96 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
97 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
102 compatible = "ralink,eeprom";
103 ralink,eeprom = "RT3062.eeprom";
107 compatible = "gpio-keys-polled";
108 #address-cells = <1>;
110 poll-interval = <100>;
115 linux,code = <0x198>;
121 linux,code = <0x211>;
126 compatible = "gpio-leds";
129 label = "vgv7510kw22:green:dsl";
134 label = "vgv7510kw22:red:internet";
135 gpios = <&gpio 10 1>;
139 label = "vgv7510kw22:red:info";
140 gpios = <&gpio 12 1>;
144 label = "vgv7510kw22:green:power";
145 gpios = <&gpio 14 1>;
146 default-state = "keep";
150 label = "vgv7510kw22:green:info";
151 gpios = <&gpio 15 1>;
154 internet_green: internet_green {
155 label = "vgv7510kw22:green:internet";
156 gpios = <&gpio 19 1>;
160 label = "vgv7510kw22:green:wlan";
161 gpios = <&gpio 20 1>;
165 label = "vgv7510kw22:red:power";
166 gpios = <&gpio 28 1>;
170 label = "vgv7510kw22:green:telefon";
171 gpios = <&gpio 29 1>;
178 compatible = "lantiq,xrx200-pdi";
179 #address-cells = <1>;
182 mtd-mac-address = <&boardconfig 0x16>;
186 compatible = "lantiq,xrx200-pdi-port";
189 phy-handle = <&phy11>;
192 compatible = "lantiq,xrx200-pdi-port";
195 phy-handle = <&phy12>;
198 compatible = "lantiq,xrx200-pdi-port";
201 phy-handle = <&phy13>;
204 compatible = "lantiq,xrx200-pdi-port";
207 phy-handle = <&phy14>;
212 compatible = "lantiq,xrx200-pdi";
213 #address-cells = <1>;
216 mtd-mac-address = <&boardconfig 0x16>;
217 mtd-mac-address-increment = <2>;
221 compatible = "lantiq,xrx200-pdi-port";
224 phy-handle = <&phy1>;
229 #address-cells = <1>;
231 compatible = "lantiq,xrx200-mdio";
233 phy1: ethernet-phy@1 {
235 compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
238 phy11: ethernet-phy@11 {
240 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
242 phy12: ethernet-phy@12 {
244 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
246 phy13: ethernet-phy@13 {
248 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
250 phy14: ethernet-phy@14 {
252 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";