target/linux/lantiq/dts/VGV7510KW22.dtsi

   1 #include "vr9.dtsi"
   2
   3 / {
   4         model = "VGV7510KW22 - o2 Box 6431";
   5
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   8         };
   9
  10         aliases {
  11                 led-boot = &power_green;
  12                 led-failsafe = &power_red;
  13                 led-running = &power_green;
  14
  15                 led-dsl = &dsl;
  16                 led-internet = &internet_green;
  17                 led-wifi = &wifi;
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x4000000>;
  22         };
  23
  24         fpi@10000000 {
  25                 localbus@0 {
  26                         nor-boot@0 {
  27                                 compatible = "lantiq,nor";
  28                                 bank-width = <2>;
  29                                 reg = <0 0x0 0x1000000>;
  30                                 #address-cells = <1>;
  31                                 #size-cells = <1>;
  32
  33                                 partitions {
  34                                         compatible = "fixed-partitions";
  35                                         #address-cells = <1>;
  36                                         #size-cells = <1>;
  37
  38                                         boardconfig: partition@fe0000 {
  39                                                 label = "board_config";
  40                                                 reg = <0xfe0000 0x20000>;
  41                                                 read-only;
  42                                         };
  43                                 };
  44                         };
  45                 };
  46
  47                 gpio: pinmux@E100B10 {
  48                         pinctrl-names = "default";
  49                         pinctrl-0 = <&state_default>;
  50
  51                         state_default: pinmux {
  52                                 gphy-leds {
  53                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  54                                                         "gphy1 led0", "gphy1 led1";
  55                                         lantiq,function = "gphy";
  56                                         lantiq,open-drain = <0>;
  57                                         lantiq,pull = <2>;
  58                                         lantiq,output = <1>;
  59                                 };
  60                                 mdio {
  61                                         lantiq,groups = "mdio";
  62                                         lantiq,function = "mdio";
  63                                 };
  64                                 pci-rst {
  65                                         lantiq,pins = "io21";
  66                                         lantiq,open-drain = <0>;
  67                                         lantiq,pull = <0>;
  68                                         lantiq,output = <1>;
  69                                 };
  70                         };
  71                 };
  72
  73                 ifxhcd@E101000 {
  74                         status = "okay";
  75                         gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
  76                 };
  77
  78                 pci@E105400 {
  79                         status = "okay";
  80                         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
  81                 };
  82
  83                 pcie@d900000 {
  84                         status = "disabled";
  85                 };
  86         };
  87
  88         gphy-xrx200 {
  89                 compatible = "lantiq,phy-xrx200";
  90                 firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
  91                 firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
  92                 phys = [ 00 01 ];
  93         };
  94
  95         ralink_eep {
  96                 compatible = "ralink,eeprom";
  97                 ralink,eeprom = "RT3062.eeprom";
  98         };
  99
 100         gpio-keys-polled {
 101                 compatible = "gpio-keys-polled";
 102                 #address-cells = <1>;
 103                 #size-cells = <0>;
 104                 poll-interval = <100>;
 105
 106                 reset {
 107                         label = "reset";
 108                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 109                         linux,code = <KEY_RESTART>;
 110                 };
 111
 112                 wps {
 113                         label = "wps";
 114                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 115                         linux,code = <KEY_WPS_BUTTON>;
 116                 };
 117         };
 118
 119         gpio-leds {
 120                 compatible = "gpio-leds";
 121
 122                 dsl: dsl {
 123                         label = "vgv7510kw22:green:dsl";
 124                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 125                 };
 126
 127                 internet_red {
 128                         label = "vgv7510kw22:red:internet";
 129                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 130                 };
 131
 132                 info_red {
 133                         label = "vgv7510kw22:red:info";
 134                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 135                 };
 136
 137                 power_green: power {
 138                         label = "vgv7510kw22:green:power";
 139                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 140                         default-state = "keep";
 141                 };
 142
 143                 info_green {
 144                         label = "vgv7510kw22:green:info";
 145                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 146                 };
 147
 148                 internet_green: internet_green {
 149                         label = "vgv7510kw22:green:internet";
 150                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 151                 };
 152
 153                 wifi: wifi {
 154                         label = "vgv7510kw22:green:wlan";
 155                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 156                 };
 157
 158                 power_red: power2 {
 159                         label = "vgv7510kw22:red:power";
 160                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 161                 };
 162
 163                 phone {
 164                         label = "vgv7510kw22:green:telefon";
 165                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
 166                 };
 167         };
 168 };
 169
 170 &eth0 {
 171         lan: interface@0 {
 172                 compatible = "lantiq,xrx200-pdi";
 173                 #address-cells = <1>;
 174                 #size-cells = <0>;
 175                 reg = <0>;
 176                 mtd-mac-address = <&boardconfig 0x16>;
 177                 lantiq,switch;
 178
 179                 ethernet@2 {
 180                         compatible = "lantiq,xrx200-pdi-port";
 181                         reg = <2>;
 182                         phy-mode = "mii";
 183                         phy-handle = <&phy11>;
 184                 };
 185                 ethernet@3 {
 186                         compatible = "lantiq,xrx200-pdi-port";
 187                         reg = <3>;
 188                         phy-mode = "mii";
 189                         phy-handle = <&phy12>;
 190                 };
 191                 ethernet@4 {
 192                         compatible = "lantiq,xrx200-pdi-port";
 193                         reg = <4>;
 194                         phy-mode = "mii";
 195                         phy-handle = <&phy13>;
 196                 };
 197                 ethernet@5 {
 198                         compatible = "lantiq,xrx200-pdi-port";
 199                         reg = <5>;
 200                         phy-mode = "mii";
 201                         phy-handle = <&phy14>;
 202                 };
 203         };
 204
 205         wan: interface@1 {
 206                 compatible = "lantiq,xrx200-pdi";
 207                 #address-cells = <1>;
 208                 #size-cells = <0>;
 209                 reg = <1>;
 210                 mtd-mac-address = <&boardconfig 0x16>;
 211                 mtd-mac-address-increment = <2>;
 212                 lantiq,wan;
 213
 214                 ethernet@0 {
 215                         compatible = "lantiq,xrx200-pdi-port";
 216                         reg = <0>;
 217                         phy-mode = "mii";
 218                         phy-handle = <&phy1>;
 219                 };
 220         };
 221
 222         mdio@0 {
 223                 #address-cells = <1>;
 224                 #size-cells = <0>;
 225                 compatible = "lantiq,xrx200-mdio";
 226
 227                 phy1: ethernet-phy@1 {
 228                         reg = <0x1>;
 229                         compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
 230                 };
 231
 232                 phy11: ethernet-phy@11 {
 233                         reg = <0x11>;
 234                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 235                 };
 236                 phy12: ethernet-phy@12 {
 237                         reg = <0x12>;
 238                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 239                 };
 240                 phy13: ethernet-phy@13 {
 241                         reg = <0x13>;
 242                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 243                 };
 244                 phy14: ethernet-phy@14 {
 245                         reg = <0x14>;
 246                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 247                 };
 248         };
 249 };