4 model = "VGV7510KW22 - o2 Box 6431";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 reg = <0x0 0x4000000>;
17 compatible = "lantiq,nor";
19 reg = <0 0x0 0x1000000>;
23 boardconfig: partition@fe0000 {
24 label = "board_config";
25 reg = <0xfe0000 0x20000>;
31 gpio: pinmux@E100B10 {
32 pinctrl-names = "default";
33 pinctrl-0 = <&state_default>;
35 state_default: pinmux {
42 lantiq,groups = "gphy0 led1",
43 "gphy1 led0", "gphy1 led1";
44 lantiq,function = "gphy";
45 lantiq,open-drain = <0>;
50 lantiq,groups = "stp";
51 lantiq,function = "stp";
53 lantiq,open-drain = <0>;
57 lantiq,groups = "mdio";
58 lantiq,function = "mdio";
62 lantiq,open-drain = <0>;
67 lantiq,groups = "spi";
68 lantiq,function = "spi";
76 compatible = "lantiq,xrx200-net";
77 reg = < 0xE108000 0x3000 /* switch */
78 0xE10B100 0x70 /* mdio */
79 0xE10B1D8 0x30 /* mii */
80 0xE10B308 0x30 /* pmac */
82 interrupt-parent = <&icu0>;
86 compatible = "lantiq,xrx200-pdi";
90 mtd-mac-address = <&boardconfig 0x16>;
94 compatible = "lantiq,xrx200-pdi-port";
97 phy-handle = <&phy11>;
100 compatible = "lantiq,xrx200-pdi-port";
103 phy-handle = <&phy12>;
106 compatible = "lantiq,xrx200-pdi-port";
109 phy-handle = <&phy13>;
112 compatible = "lantiq,xrx200-pdi-port";
115 phy-handle = <&phy14>;
120 #address-cells = <1>;
122 compatible = "lantiq,xrx200-mdio";
124 phy11: ethernet-phy@11 {
126 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
128 phy12: ethernet-phy@12 {
130 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
132 phy13: ethernet-phy@13 {
134 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
136 phy14: ethernet-phy@14 {
138 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
144 compatible = "lantiq,gpio-stp-xway";
145 reg = <0xE100BB0 0x40>;
149 lantiq,shadow = <0xff>;
150 lantiq,groups = <0x1>;
153 lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */
158 gpios = <&gpio 47 0>;
163 lantiq,bus-clock = <33333333>;
164 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
166 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
168 gpio-reset = <&gpio 21 0>;
169 req-mask = <0x1>; /* GNT1 */
178 compatible = "lantiq,phy-xrx200";
179 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
180 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
185 compatible = "ralink,eeprom";
186 ralink,eeprom = "RT3062.eeprom";
190 compatible = "gpio-keys-polled";
191 #address-cells = <1>;
193 poll-interval = <100>;
198 linux,code = <0x198>;
204 linux,code = <0x211>;
209 compatible = "gpio-leds";
217 label = "internet_red";
218 gpios = <&gpio 10 1>;
223 gpios = <&gpio 12 1>;
227 label = "power"; /* green */
228 gpios = <&gpio 14 1>;
232 label = "info_green";
233 gpios = <&gpio 15 1>;
237 label = "internet_green";
238 gpios = <&gpio 19 1>;
243 gpios = <&gpio 20 1>;
247 label = "power2"; /* red */
248 gpios = <&gpio 28 1>;
253 gpios = <&gpio 29 1>;