4 model = "VGV7510KW22 - o2 Box 6431";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 failsafe = &power_red;
12 running = &power_green;
15 internet = &internet_green;
21 reg = <0x0 0x4000000>;
25 compatible = "lantiq,cputemp";
31 compatible = "lantiq,nor";
33 reg = <0 0x0 0x1000000>;
38 compatible = "fixed-partitions";
42 boardconfig: partition@fe0000 {
43 label = "board_config";
44 reg = <0xfe0000 0x20000>;
51 gpio: pinmux@E100B10 {
52 pinctrl-names = "default";
53 pinctrl-0 = <&state_default>;
55 state_default: pinmux {
57 lantiq,groups = "gphy0 led0", "gphy0 led1",
58 "gphy1 led0", "gphy1 led1";
59 lantiq,function = "gphy";
60 lantiq,open-drain = <0>;
65 lantiq,groups = "mdio";
66 lantiq,function = "mdio";
70 lantiq,open-drain = <0>;
84 lantiq,bus-clock = <33333333>;
85 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
87 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
89 gpio-reset = <&gpio 21 0>;
90 req-mask = <0x1>; /* GNT1 */
99 compatible = "lantiq,phy-xrx200";
100 firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/
101 firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/
106 compatible = "ralink,eeprom";
107 ralink,eeprom = "RT3062.eeprom";
111 compatible = "gpio-keys-polled";
112 #address-cells = <1>;
114 poll-interval = <100>;
119 linux,code = <0x198>;
125 linux,code = <0x211>;
130 compatible = "gpio-leds";
133 label = "vgv7510kw22:green:dsl";
138 label = "vgv7510kw22:red:internet";
139 gpios = <&gpio 10 1>;
143 label = "vgv7510kw22:red:info";
144 gpios = <&gpio 12 1>;
148 label = "vgv7510kw22:green:power";
149 gpios = <&gpio 14 1>;
150 default-state = "keep";
154 label = "vgv7510kw22:green:info";
155 gpios = <&gpio 15 1>;
158 internet_green: internet_green {
159 label = "vgv7510kw22:green:internet";
160 gpios = <&gpio 19 1>;
164 label = "vgv7510kw22:green:wlan";
165 gpios = <&gpio 20 1>;
169 label = "vgv7510kw22:red:power";
170 gpios = <&gpio 28 1>;
174 label = "vgv7510kw22:green:telefon";
175 gpios = <&gpio 29 1>;
182 compatible = "lantiq,xrx200-pdi";
183 #address-cells = <1>;
186 mtd-mac-address = <&boardconfig 0x16>;
190 compatible = "lantiq,xrx200-pdi-port";
193 phy-handle = <&phy11>;
196 compatible = "lantiq,xrx200-pdi-port";
199 phy-handle = <&phy12>;
202 compatible = "lantiq,xrx200-pdi-port";
205 phy-handle = <&phy13>;
208 compatible = "lantiq,xrx200-pdi-port";
211 phy-handle = <&phy14>;
216 compatible = "lantiq,xrx200-pdi";
217 #address-cells = <1>;
220 mtd-mac-address = <&boardconfig 0x16>;
221 mtd-mac-address-increment = <2>;
225 compatible = "lantiq,xrx200-pdi-port";
228 phy-handle = <&phy1>;
233 #address-cells = <1>;
235 compatible = "lantiq,xrx200-mdio";
237 phy1: ethernet-phy@1 {
239 compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
242 phy11: ethernet-phy@11 {
244 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
246 phy12: ethernet-phy@12 {
248 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
250 phy13: ethernet-phy@13 {
252 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
254 phy14: ethernet-phy@14 {
256 compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";