5 #include <dt-bindings/input/input.h>
8 model = "VG3503J - BT OpenReach VDSL Modem";
11 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
15 led-boot = &power_green;
16 led-failsafe = &power_red;
17 led-running = &power_green;
23 reg = <0x0 0x2000000>;
28 ranges = <0 0 0x0 0x3ffffff>;
30 compatible = "lantiq,nor";
32 reg = <0 0x0 0x2000000>;
37 compatible = "fixed-partitions";
43 reg = <0x00000 0x20000>;
48 reg = <0x20000 0x7d0000>;
53 reg = <0x7f0000 0x10000>;
59 gpio: pinmux@E100B10 {
60 pinctrl-names = "default";
61 pinctrl-0 = <&state_default>;
63 state_default: pinmux {
65 lantiq,groups = "mdio";
66 lantiq,function = "mdio";
69 lantiq,groups = "gphy0 led0", "gphy0 led1",
70 "gphy0 led2", "gphy1 led0",
71 "gphy1 led1", "gphy1 led2";
72 lantiq,function = "gphy";
74 lantiq,open-drain = <0>;
82 compatible = "lantiq,phy-xrx200";
83 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
84 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
89 compatible = "gpio-keys-polled";
92 poll-interval = <100>;
95 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
96 linux,code = <KEY_RESTART>;
101 compatible = "gpio-leds";
104 label = "vg3503j:red:power";
105 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
108 label = "vg3503j:green:dsl";
109 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
112 label = "vg3503j:green:power";
113 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
114 default-state = "keep";
121 compatible = "lantiq,xrx200-pdi";
122 #address-cells = <1>;
128 compatible = "lantiq,xrx200-pdi-port";
131 phy-handle = <&phy11>;
134 compatible = "lantiq,xrx200-pdi-port";
137 phy-handle = <&phy13>;
142 #address-cells = <1>;
144 compatible = "lantiq,xrx200-mdio";
145 phy11: ethernet-phy@11 {
147 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
148 lantiq,led1h = <0x70>;
149 lantiq,led1l = <0x00>;
150 lantiq,led2h = <0x00>;
151 lantiq,led2l = <0x03>;
153 phy13: ethernet-phy@13 {
155 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
156 lantiq,led1h = <0x70>;
157 lantiq,led1l = <0x00>;
158 lantiq,led2h = <0x00>;
159 lantiq,led2l = <0x03>;