4 model = "VG3503J - BT OpenReach VDSL Modem";
7 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
11 failsafe = &power_red;
12 running = &power_green;
19 reg = <0x0 0x2000000>;
24 ranges = <0 0 0x0 0x3ffffff>;
26 compatible = "lantiq,nor";
28 reg = <0 0x0 0x2000000>;
33 compatible = "fixed-partitions";
39 reg = <0x00000 0x20000>;
44 reg = <0x20000 0x300000>;
49 reg = <0x320000 0x420000>;
54 reg = <0x740000 0x80000>;
58 label = "pri_bfocus_cfg";
59 reg = <0x7c0000 0x10000>;
63 label = "sec_bfocus_cfg";
64 reg = <0x7d0000 0x10000>;
69 reg = <0x7e0000 0x10000>;
74 reg = <0x7f0000 0x10000>;
80 gpio: pinmux@E100B10 {
81 pinctrl-names = "default";
82 pinctrl-0 = <&state_default>;
84 state_default: pinmux {
86 lantiq,groups = "mdio";
87 lantiq,function = "mdio";
90 lantiq,groups = "gphy0 led0", "gphy0 led1",
91 "gphy0 led2", "gphy1 led0",
92 "gphy1 led1", "gphy1 led2";
93 lantiq,function = "gphy";
95 lantiq,open-drain = <0>;
103 compatible = "lantiq,phy-xrx200";
104 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
105 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
110 compatible = "gpio-keys-polled";
111 #address-cells = <1>;
113 poll-interval = <100>;
117 linux,code = <0x198>;
122 compatible = "gpio-leds";
125 label = "vg3503j:red:power";
126 gpios = <&gpio 14 1>;
129 label = "vg3503j:green:dsl";
130 gpios = <&gpio 19 1>;
133 label = "vg3503j:green:power";
134 gpios = <&gpio 28 1>;
135 default-state = "keep";
142 compatible = "lantiq,xrx200-pdi";
143 #address-cells = <1>;
146 mac-address = [ 00 11 22 33 44 55 ];
149 compatible = "lantiq,xrx200-pdi-port";
152 phy-handle = <&phy11>;
155 compatible = "lantiq,xrx200-pdi-port";
158 phy-handle = <&phy13>;
163 #address-cells = <1>;
165 compatible = "lantiq,xrx200-mdio";
166 phy11: ethernet-phy@11 {
168 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
169 lantiq,led1h = <0x70>;
170 lantiq,led1l = <0x00>;
171 lantiq,led2h = <0x00>;
172 lantiq,led2l = <0x03>;
174 phy13: ethernet-phy@13 {
176 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
177 lantiq,led1h = <0x70>;
178 lantiq,led1l = <0x00>;
179 lantiq,led2h = <0x00>;
180 lantiq,led2l = <0x03>;