6 model = "VG3503J - BT OpenReach VDSL Modem";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
13 reg = <0x0 0x2000000>;
18 ranges = <0 0 0x0 0x3ffffff>;
20 compatible = "lantiq,nor";
22 reg = <0 0x0 0x2000000>;
28 reg = <0x00000 0x20000>;
33 reg = <0x20000 0x180000>;
38 reg = <0x1a0000 0x5a0000>;
43 reg = <0x740000 0x80000>;
47 label = "pri_bfocus_cfg";
48 reg = <0x7c0000 0x10000>;
52 label = "sec_bfocus_cfg";
53 reg = <0x7d0000 0x10000>;
58 reg = <0x7e0000 0x10000>;
63 reg = <0x7f0000 0x10000>;
68 gpio: pinmux@E100B10 {
69 pinctrl-names = "default";
70 pinctrl-0 = <&state_default>;
72 state_default: pinmux {
74 lantiq,groups = "mdio";
75 lantiq,function = "mdio";
78 lantiq,groups = "gphy0 led0", "gphy0 led1",
79 "gphy0 led2", "gphy1 led0",
80 "gphy1 led1", "gphy1 led2";
81 lantiq,function = "gphy";
83 lantiq,open-drain = <0>;
92 compatible = "lantiq,xrx200-net";
93 reg = < 0xE108000 0x3000 /* switch */
94 0xE10B100 0x70 /* mdio */
95 0xE10B1D8 0x30 /* mii */
96 0xE10B308 0x30 /* pmac */
98 interrupt-parent = <&icu0>;
102 compatible = "lantiq,xrx200-pdi";
103 #address-cells = <1>;
106 mac-address = [ 00 11 22 33 44 55 ];
108 compatible = "lantiq,xrx200-pdi-port";
111 phy-handle = <&phy11>;
114 compatible = "lantiq,xrx200-pdi-port";
117 phy-handle = <&phy13>;
122 #address-cells = <1>;
124 compatible = "lantiq,xrx200-mdio";
125 phy11: ethernet-phy@11 {
127 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
129 phy13: ethernet-phy@13 {
131 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
138 compatible = "lantiq,phy-xrx200";
139 firmware = "lantiq/vr9_phy22f_a1x.bin";
144 compatible = "gpio-keys-polled";
145 #address-cells = <1>;
147 poll-interval = <100>;
151 linux,code = <0x198>;
156 compatible = "gpio-leds";
160 gpios = <&gpio 14 1>;
163 label = "bt:green:dsl";
164 gpios = <&gpio 19 1>;
168 gpios = <&gpio 28 1>;