target/linux/lantiq/dts/VG3503J.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "VG3503J - BT OpenReach VDSL Modem";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         aliases {
  13                 led-boot = &power_green;
  14                 led-failsafe = &power_red;
  15                 led-running = &power_green;
  16
  17                 led-internet = &dsl;
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x2000000>;
  22         };
  23
  24         fpi@10000000 {
  25                 localbus@0 {
  26                         ranges = <0 0 0x0 0x3ffffff>;
  27                         nor-boot@0 {
  28                                 compatible = "lantiq,nor";
  29                                 bank-width = <2>;
  30                                 reg = <0 0x0 0x2000000>;
  31                                 #address-cells = <1>;
  32                                 #size-cells = <1>;
  33
  34                                 partitions {
  35                                         compatible = "fixed-partitions";
  36                                         #address-cells = <1>;
  37                                         #size-cells = <1>;
  38
  39                                         partition@0 {
  40                                                 label = "uboot";
  41                                                 reg = <0x00000 0x20000>;
  42                                         };
  43
  44                                         partition@20000 {
  45                                                 label = "firmware";
  46                                                 reg = <0x20000 0x7d0000>;
  47                                         };
  48
  49                                         partition@7f0000 {
  50                                                 label = "uboot-env";
  51                                                 reg = <0x7f0000 0x10000>;
  52                                         };
  53                                 };
  54                         };
  55                 };
  56
  57                 gpio: pinmux@E100B10 {
  58                         pinctrl-names = "default";
  59                         pinctrl-0 = <&state_default>;
  60
  61                         state_default: pinmux {
  62                                 mdio {
  63                                         lantiq,groups = "mdio";
  64                                         lantiq,function = "mdio";
  65                                 };
  66                                 gphy-leds {
  67                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  68                                                         "gphy0 led2", "gphy1 led0",
  69                                                         "gphy1 led1", "gphy1 led2";
  70                                         lantiq,function = "gphy";
  71                                         lantiq,pull = <2>;
  72                                         lantiq,open-drain = <0>;
  73                                         lantiq,output = <1>;
  74                                 };
  75                         };
  76                 };
  77         };
  78
  79         gphy-xrx200 {
  80                 compatible = "lantiq,phy-xrx200";
  81                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
  82                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
  83                 phys = [ 00 01 ];
  84         };
  85
  86         gpio-keys-polled {
  87                 compatible = "gpio-keys-polled";
  88                 #address-cells = <1>;
  89                 #size-cells = <0>;
  90                 poll-interval = <100>;
  91                 reset {
  92                         label = "reset";
  93                         gpios = <&gpio 6 1>;
  94                         linux,code = <0x198>;
  95                 };
  96         };
  97
  98         gpio-leds {
  99                 compatible = "gpio-leds";
 100
 101                 power_red: power2 {
 102                         label = "vg3503j:red:power";
 103                         gpios = <&gpio 14 1>;
 104                 };
 105                 dsl: dsl {
 106                         label = "vg3503j:green:dsl";
 107                         gpios = <&gpio 19 1>;
 108                 };
 109                 power_green: power {
 110                         label = "vg3503j:green:power";
 111                         gpios = <&gpio 28 1>;
 112                         default-state = "keep";
 113                 };
 114         };
 115 };
 116
 117 &eth0 {
 118         interface@0 {
 119                 compatible = "lantiq,xrx200-pdi";
 120                 #address-cells = <1>;
 121                 #size-cells = <0>;
 122                 reg = <0>;
 123
 124                 lantiq,switch;
 125                 ethernet@2 {
 126                         compatible = "lantiq,xrx200-pdi-port";
 127                         reg = <2>;
 128                         phy-mode = "mii";
 129                         phy-handle = <&phy11>;
 130                 };
 131                 ethernet@4 {
 132                         compatible = "lantiq,xrx200-pdi-port";
 133                         reg = <4>;
 134                         phy-mode = "mii";
 135                         phy-handle = <&phy13>;
 136                 };
 137         };
 138
 139         mdio@0 {
 140                 #address-cells = <1>;
 141                 #size-cells = <0>;
 142                 compatible = "lantiq,xrx200-mdio";
 143                 phy11: ethernet-phy@11 {
 144                         reg = <0x11>;
 145                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 146                         lantiq,led1h = <0x70>;
 147                         lantiq,led1l = <0x00>;
 148                         lantiq,led2h = <0x00>;
 149                         lantiq,led2l = <0x03>;
 150                 };
 151                 phy13: ethernet-phy@13 {
 152                         reg = <0x13>;
 153                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 154                         lantiq,led1h = <0x70>;
 155                         lantiq,led1l = <0x00>;
 156                         lantiq,led2h = <0x00>;
 157                         lantiq,led2l = <0x03>;
 158                 };
 159         };
 160 };