5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
14 compatible = "lantiq,spi-xway";
15 reg = <0xE100800 0x100>;
16 interrupt-parent = <&icu0>;
17 interrupts = <22 23 24>;
22 compatible = "en25q64", "m25p80";
24 linux,modalias = "en25q64";
25 spi-max-frequency = <20000000>;
34 reg = <0x20000 0x6a0000>;
39 reg = <0x6c0000 0x100000>;
44 reg = <0x7c0000 0x10000>;
49 ath9k_cal: partition@7d0000 {
50 reg = <0x7d0000 0x30000>;
51 label = "boardconfig";
57 gpio: pinmux@E100B10 {
58 pinctrl-names = "default";
59 pinctrl-0 = <&state_default>;
61 state_default: pinmux {
63 lantiq,groups = "mdio";
64 lantiq,function = "mdio";
67 lantiq,groups = "gphy0 led1", "gphy1 led1";
68 lantiq,function = "gphy";
70 lantiq,open-drain = <0>;
76 lantiq,open-drain = <0>;
80 lantiq,groups = "spi", "spi_cs4";
81 lantiq,function = "spi";
94 compatible = "lantiq,xrx200-net";
95 reg = < 0xE108000 0x3000 /* switch */
96 0xE10B100 0x70 /* mdio */
97 0xE10B1D8 0x30 /* mii */
98 0xE10B308 0x30 /* pmac */
100 interrupt-parent = <&icu0>;
101 interrupts = <73 72>;
104 compatible = "lantiq,xrx200-pdi";
105 #address-cells = <1>;
108 mtd-mac-address = <&ath9k_cal 0xf100>;
112 compatible = "lantiq,xrx200-pdi-port";
115 phy-handle = <&phy0>;
116 // gpios = <&gpio 42 1>;
119 compatible = "lantiq,xrx200-pdi-port";
122 phy-handle = <&phy5>;
125 compatible = "lantiq,xrx200-pdi-port";
128 phy-handle = <&phy11>;
131 compatible = "lantiq,xrx200-pdi-port";
134 phy-handle = <&phy13>;
139 #address-cells = <1>;
141 compatible = "lantiq,xrx200-mdio";
142 phy0: ethernet-phy@0 {
144 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
146 phy5: ethernet-phy@5 {
148 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
150 phy11: ethernet-phy@11 {
152 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
154 phy13: ethernet-phy@13 {
156 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
163 gpios = <&gpio 33 0>;
164 lantiq,portmask = <0x3>;
169 gpios = <&gpio 33 0>;
174 compatible = "lantiq,phy-xrx200";
175 firmware = "lantiq/vr9_phy11g_a2x.bin";
180 compatible = "lantiq,pcie-xway";
184 compatible = "ath9k,eeprom";
185 ath,eep-flash = <&ath9k_cal 0x21000>;
186 ath,mac-offset = <0xf100>;
192 compatible = "gpio-keys-polled";
193 #address-cells = <1>;
195 poll-interval = <100>;
199 linux,code = <0x198>;
206 linux,input-type = <5>; /* EV_SW */
211 gpios = <&gpio 39 1>;
212 linux,code = <0x211>;
217 compatible = "gpio-leds";
229 gpios = <&gpio 19 0>;
233 gpios = <&gpio 20 0>;
237 gpios = <&gpio 37 0>;