target/linux/lantiq/dts/TDW89X0.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6         };
   7
   8         memory@0 {
   9                 reg = <0x0 0x4000000>;
  10         };
  11
  12         fpi@10000000 {
  13                 spi@E100800 {
  14                         compatible = "lantiq,spi-xway";
  15                         reg = <0xE100800 0x100>;
  16                         interrupt-parent = <&icu0>;
  17                         interrupts = <22 23 24>;
  18                         #address-cells = <1>;
  19                         m25p80@0 {
  20                                 #address-cells = <1>;
  21                                 #size-cells = <1>;
  22                                 compatible = "en25q64", "m25p80";
  23                                 reg = <3>;
  24                                 linux,modalias = "en25q64";
  25                                 spi-max-frequency = <20000000>;
  26
  27                                 partition@0 {
  28                                         reg = <0x0 0x20000>;
  29                                         label = "u-boot";
  30                                         read-only;
  31                                 };
  32
  33                                 partition@20000 {
  34                                         reg = <0x20000 0x6a0000>;
  35                                         label = "firmware";
  36                                 };
  37
  38                                 partition@6c0000 {
  39                                         reg = <0x6c0000 0x100000>;
  40                                         label = "dsl_fw";
  41                                 };
  42
  43                                 partition@7c0000 {
  44                                         reg = <0x7c0000 0x10000>;
  45                                         label = "config";
  46                                         read-only;
  47                                 };
  48
  49                                 ath9k_cal: partition@7d0000 {
  50                                         reg = <0x7d0000 0x30000>;
  51                                         label = "boardconfig";
  52                                         read-only;
  53                                 };
  54                         };
  55                 };
  56
  57                 gpio: pinmux@E100B10 {
  58                         pinctrl-names = "default";
  59                         pinctrl-0 = <&state_default>;
  60
  61                         state_default: pinmux {
  62                                 mdio {
  63                                         lantiq,groups = "mdio";
  64                                         lantiq,function = "mdio";
  65                                 };
  66                                 gphy-leds {
  67                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  68                                         lantiq,function = "gphy";
  69                                         lantiq,pull = <2>;
  70                                         lantiq,open-drain = <0>;
  71                                         lantiq,output = <1>;
  72                                 };
  73                                 phy-rst {
  74                                         lantiq,pins = "io42";
  75                                         lantiq,pull = <0>;
  76                                         lantiq,open-drain = <0>;
  77                                         lantiq,output = <1>;
  78                                 };
  79                                 spi {
  80                                         lantiq,groups = "spi", "spi_cs4";
  81                                         lantiq,function = "spi";
  82                                 };
  83                                 pcie-rst {
  84                                         lantiq,pins = "io38";
  85                                         lantiq,pull = <0>;
  86                                         lantiq,output = <1>;
  87                                 };
  88                         };
  89                 };
  90
  91                 eth@E108000 {
  92                         #address-cells = <1>;
  93                         #size-cells = <0>;
  94                         compatible = "lantiq,xrx200-net";
  95                         reg = < 0xE108000 0x3000 /* switch */
  96                                 0xE10B100 0x70 /* mdio */
  97                                 0xE10B1D8 0x30 /* mii */
  98                                 0xE10B308 0x30 /* pmac */
  99                         >;
 100                         interrupt-parent = <&icu0>;
 101                         interrupts = <73 72>;
 102
 103                         lan: interface@0 {
 104                                 compatible = "lantiq,xrx200-pdi";
 105                                 #address-cells = <1>;
 106                                 #size-cells = <0>;
 107                                 reg = <0>;
 108                                 mtd-mac-address = <&ath9k_cal 0xf100>;
 109                                 lantiq,switch;
 110
 111                                 ethernet@0 {
 112                                         compatible = "lantiq,xrx200-pdi-port";
 113                                         reg = <0>;
 114                                         phy-mode = "rgmii";
 115                                         phy-handle = <&phy0>;
 116                                         // gpios = <&gpio 42 1>;
 117                                 };
 118                                 ethernet@5 {
 119                                         compatible = "lantiq,xrx200-pdi-port";
 120                                         reg = <5>;
 121                                         phy-mode = "rgmii";
 122                                         phy-handle = <&phy5>;
 123                                 };
 124                                 ethernet@2 {
 125                                         compatible = "lantiq,xrx200-pdi-port";
 126                                         reg = <2>;
 127                                         phy-mode = "gmii";
 128                                         phy-handle = <&phy11>;
 129                                 };
 130                                 ethernet@3 {
 131                                         compatible = "lantiq,xrx200-pdi-port";
 132                                         reg = <4>;
 133                                         phy-mode = "gmii";
 134                                         phy-handle = <&phy13>;
 135                                 };
 136                         };
 137
 138                         mdio@0 {
 139                                 #address-cells = <1>;
 140                                 #size-cells = <0>;
 141                                 compatible = "lantiq,xrx200-mdio";
 142                                 phy0: ethernet-phy@0 {
 143                                         reg = <0x0>;
 144                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 145                                 };
 146                                 phy5: ethernet-phy@5 {
 147                                         reg = <0x5>;
 148                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 149                                 };
 150                                 phy11: ethernet-phy@11 {
 151                                         reg = <0x11>;
 152                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 153                                 };
 154                                 phy13: ethernet-phy@13 {
 155                                         reg = <0x13>;
 156                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 157                                 };
 158                         };
 159                 };
 160
 161                 ifxhcd@E101000 {
 162                         status = "okay";
 163                         gpios = <&gpio 33 0>;
 164                         lantiq,portmask = <0x3>;
 165                 };
 166
 167                 ifxhcd@E106000 {
 168                         status = "okay";
 169                         gpios = <&gpio 33 0>;
 170                 };
 171         };
 172
 173         gphy-xrx200 {
 174                 compatible = "lantiq,phy-xrx200";
 175                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 176                 phys = [ 00 01 ];
 177         };
 178
 179         pcie {
 180                 compatible = "lantiq,pcie-xway";
 181         };
 182
 183         ath9k_eep {
 184                 compatible = "ath9k,eeprom";
 185                 ath,eep-flash = <&ath9k_cal 0x21000>;
 186                 ath,mac-offset = <0xf100>;
 187                 ath,mac-increment;
 188                 ath,led-pin = <0>;
 189         };
 190
 191         gpio-keys-polled {
 192                 compatible = "gpio-keys-polled";
 193                 #address-cells = <1>;
 194                 #size-cells = <0>;
 195                 poll-interval = <100>;
 196                 reset {
 197                         label = "reset";
 198                         gpios = <&gpio 0 1>;
 199                         linux,code = <0x198>;
 200                 };
 201
 202                 wifi {
 203                         label = "wifi";
 204                         gpios = <&gpio 9 0>;
 205                         linux,code = <0xf7>;
 206                         linux,input-type = <5>; /* EV_SW */
 207                 };
 208
 209                 wps {
 210                         label = "wps";
 211                         gpios = <&gpio 39 1>;
 212                         linux,code = <0x211>;
 213                 };
 214         };
 215
 216         gpio-leds {
 217                 compatible = "gpio-leds";
 218
 219                 dsl {
 220                         label = "dsl";
 221                         gpios = <&gpio 4 0>;
 222                 };
 223                 internet {
 224                         label = "internet";
 225                         gpios = <&gpio 5 0>;
 226                 };
 227                 usb0 {
 228                         label = "usb";
 229                         gpios = <&gpio 19 0>;
 230                 };
 231                 usb2 {
 232                         label = "usb2";
 233                         gpios = <&gpio 20 0>;
 234                 };
 235                 wps {
 236                         label = "wps";
 237                         gpios = <&gpio 37 0>;
 238                 };
 239         };
 240 };