5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
14 compatible = "lantiq,spi-xway";
15 reg = <0xE100800 0x100>;
16 interrupt-parent = <&icu0>;
17 interrupts = <22 23 24>;
22 compatible = "jedec,spi-nor";
24 spi-max-frequency = <20000000>;
33 reg = <0x20000 0x7a0000>;
38 reg = <0x7c0000 0x10000>;
43 ath9k_cal: partition@7d0000 {
44 reg = <0x7d0000 0x30000>;
45 label = "boardconfig";
51 gpio: pinmux@E100B10 {
52 pinctrl-names = "default";
53 pinctrl-0 = <&state_default>;
55 state_default: pinmux {
57 lantiq,groups = "mdio";
58 lantiq,function = "mdio";
61 lantiq,groups = "gphy0 led1", "gphy1 led1";
62 lantiq,function = "gphy";
64 lantiq,open-drain = <0>;
70 lantiq,open-drain = <0>;
74 lantiq,groups = "spi", "spi_cs4";
75 lantiq,function = "spi";
88 compatible = "lantiq,xrx200-net";
89 reg = < 0xE108000 0x3000 /* switch */
90 0xE10B100 0x70 /* mdio */
91 0xE10B1D8 0x30 /* mii */
92 0xE10B308 0x30 /* pmac */
94 interrupt-parent = <&icu0>;
98 compatible = "lantiq,xrx200-pdi";
102 mtd-mac-address = <&ath9k_cal 0xf100>;
106 compatible = "lantiq,xrx200-pdi-port";
109 phy-handle = <&phy0>;
110 // gpios = <&gpio 42 1>;
113 compatible = "lantiq,xrx200-pdi-port";
116 phy-handle = <&phy5>;
119 compatible = "lantiq,xrx200-pdi-port";
122 phy-handle = <&phy11>;
125 compatible = "lantiq,xrx200-pdi-port";
128 phy-handle = <&phy13>;
133 #address-cells = <1>;
135 compatible = "lantiq,xrx200-mdio";
136 phy0: ethernet-phy@0 {
138 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
140 phy5: ethernet-phy@5 {
142 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
144 phy11: ethernet-phy@11 {
146 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
148 phy13: ethernet-phy@13 {
150 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
157 gpios = <&gpio 33 0>;
158 lantiq,portmask = <0x3>;
163 gpios = <&gpio 33 0>;
168 compatible = "lantiq,phy-xrx200";
169 firmware = "lantiq/vr9_phy11g_a2x.bin";
174 compatible = "lantiq,pcie-xway";
178 compatible = "ath9k,eeprom";
179 ath,eep-flash = <&ath9k_cal 0x21000>;
180 ath,mac-offset = <0xf100>;
188 compatible = "gpio-keys-polled";
189 #address-cells = <1>;
191 poll-interval = <100>;
195 linux,code = <0x198>;
202 linux,input-type = <5>; /* EV_SW */
207 gpios = <&gpio 39 1>;
208 linux,code = <0x211>;
213 compatible = "gpio-leds";
225 gpios = <&gpio 19 0>;
229 gpios = <&gpio 20 0>;
233 gpios = <&gpio 37 0>;