5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
8 /* the power led can't be controlled, use the wps led instead */
20 reg = <0x0 0x4000000>;
24 gpio: pinmux@E100B10 {
25 pinctrl-names = "default";
26 pinctrl-0 = <&state_default>;
28 state_default: pinmux {
30 lantiq,groups = "mdio";
31 lantiq,function = "mdio";
34 lantiq,groups = "gphy0 led1", "gphy1 led1";
35 lantiq,function = "gphy";
37 lantiq,open-drain = <0>;
43 lantiq,open-drain = <0>;
52 pins_spi_default: pins_spi_default {
54 lantiq,groups = "spi_di";
55 lantiq,function = "spi";
58 lantiq,groups = "spi_do", "spi_clk",
60 lantiq,function = "spi";
69 lantiq,portmask = <0x3>;
79 compatible = "lantiq,phy-xrx200";
80 firmware = "lantiq/vr9_phy11g_a2x.bin";
85 compatible = "ath9k,eeprom";
86 ath,eep-flash = <&ath9k_cal 0x21000>;
87 ath,mac-offset = <0xf100>;
95 compatible = "gpio-keys-polled";
98 poll-interval = <100>;
102 linux,code = <0x198>;
109 linux,input-type = <5>; /* EV_SW */
114 gpios = <&gpio 39 1>;
115 linux,code = <0x211>;
120 compatible = "gpio-leds";
122 power is not controllable via gpio
125 label = "tdw89x0:green:dsl";
129 label = "tdw89x0:green:internet";
133 label = "tdw89x0:green:usb";
134 gpios = <&gpio 19 0>;
137 label = "tdw89x0:green:usb2";
138 gpios = <&gpio 20 0>;
141 label = "tdw89x0:green:wps";
142 gpios = <&gpio 37 0>;
148 pinctrl-names = "default";
149 pinctrl-0 = <&pins_spi_default>;
154 #address-cells = <1>;
156 compatible = "jedec,spi-nor";
158 spi-max-frequency = <33250000>;
162 compatible = "fixed-partitions";
163 #address-cells = <1>;
173 reg = <0x20000 0x7a0000>;
178 reg = <0x7c0000 0x10000>;
183 ath9k_cal: partition@7d0000 {
184 reg = <0x7d0000 0x30000>;
185 label = "boardconfig";
194 compatible = "lantiq,xrx200-pdi";
195 #address-cells = <1>;
198 mtd-mac-address = <&ath9k_cal 0xf100>;
202 compatible = "lantiq,xrx200-pdi-port";
205 phy-handle = <&phy0>;
206 // gpios = <&gpio 42 1>;
209 compatible = "lantiq,xrx200-pdi-port";
212 phy-handle = <&phy5>;
215 compatible = "lantiq,xrx200-pdi-port";
218 phy-handle = <&phy11>;
221 compatible = "lantiq,xrx200-pdi-port";
224 phy-handle = <&phy13>;
229 #address-cells = <1>;
231 compatible = "lantiq,xrx200-mdio";
232 phy0: ethernet-phy@0 {
234 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
236 phy5: ethernet-phy@5 {
238 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
240 phy11: ethernet-phy@11 {
242 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
244 phy13: ethernet-phy@13 {
246 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";