target/linux/lantiq/dts/TDW89X0.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6
   7                 leds {
   8                         /* the power led can't be controlled, use the wps led instead */
   9                         boot = &wps;
  10                         failsafe = &wps;
  11
  12                         dsl = &dsl;
  13                         internet = &internet;
  14                         usb = &usb0;
  15                         usb2 = &usb2;
  16                 };
  17         };
  18
  19         memory@0 {
  20                 reg = <0x0 0x4000000>;
  21         };
  22
  23         fpi@10000000 {
  24                 gpio: pinmux@E100B10 {
  25                         pinctrl-names = "default";
  26                         pinctrl-0 = <&state_default>;
  27
  28                         state_default: pinmux {
  29                                 mdio {
  30                                         lantiq,groups = "mdio";
  31                                         lantiq,function = "mdio";
  32                                 };
  33                                 gphy-leds {
  34                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  35                                         lantiq,function = "gphy";
  36                                         lantiq,pull = <2>;
  37                                         lantiq,open-drain = <0>;
  38                                         lantiq,output = <1>;
  39                                 };
  40                                 phy-rst {
  41                                         lantiq,pins = "io42";
  42                                         lantiq,pull = <0>;
  43                                         lantiq,open-drain = <0>;
  44                                         lantiq,output = <1>;
  45                                 };
  46                                 spi {
  47                                         lantiq,groups = "spi", "spi_cs4";
  48                                         lantiq,function = "spi";
  49                                 };
  50                                 pcie-rst {
  51                                         lantiq,pins = "io38";
  52                                         lantiq,pull = <0>;
  53                                         lantiq,output = <1>;
  54                                 };
  55                         };
  56                 };
  57
  58                 eth@E108000 {
  59                         #address-cells = <1>;
  60                         #size-cells = <0>;
  61                         compatible = "lantiq,xrx200-net";
  62                         reg = < 0xE108000 0x3000 /* switch */
  63                                 0xE10B100 0x70 /* mdio */
  64                                 0xE10B1D8 0x30 /* mii */
  65                                 0xE10B308 0x30 /* pmac */
  66                         >;
  67                         interrupt-parent = <&icu0>;
  68                         interrupts = <73 72>;
  69
  70                         lan: interface@0 {
  71                                 compatible = "lantiq,xrx200-pdi";
  72                                 #address-cells = <1>;
  73                                 #size-cells = <0>;
  74                                 reg = <0>;
  75                                 mtd-mac-address = <&ath9k_cal 0xf100>;
  76                                 lantiq,switch;
  77
  78                                 ethernet@0 {
  79                                         compatible = "lantiq,xrx200-pdi-port";
  80                                         reg = <0>;
  81                                         phy-mode = "rgmii";
  82                                         phy-handle = <&phy0>;
  83                                         // gpios = <&gpio 42 1>;
  84                                 };
  85                                 ethernet@5 {
  86                                         compatible = "lantiq,xrx200-pdi-port";
  87                                         reg = <5>;
  88                                         phy-mode = "rgmii";
  89                                         phy-handle = <&phy5>;
  90                                 };
  91                                 ethernet@2 {
  92                                         compatible = "lantiq,xrx200-pdi-port";
  93                                         reg = <2>;
  94                                         phy-mode = "gmii";
  95                                         phy-handle = <&phy11>;
  96                                 };
  97                                 ethernet@3 {
  98                                         compatible = "lantiq,xrx200-pdi-port";
  99                                         reg = <4>;
 100                                         phy-mode = "gmii";
 101                                         phy-handle = <&phy13>;
 102                                 };
 103                         };
 104
 105                         mdio@0 {
 106                                 #address-cells = <1>;
 107                                 #size-cells = <0>;
 108                                 compatible = "lantiq,xrx200-mdio";
 109                                 phy0: ethernet-phy@0 {
 110                                         reg = <0x0>;
 111                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 112                                 };
 113                                 phy5: ethernet-phy@5 {
 114                                         reg = <0x5>;
 115                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 116                                 };
 117                                 phy11: ethernet-phy@11 {
 118                                         reg = <0x11>;
 119                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 120                                 };
 121                                 phy13: ethernet-phy@13 {
 122                                         reg = <0x13>;
 123                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 124                                 };
 125                         };
 126                 };
 127
 128                 ifxhcd@E101000 {
 129                         status = "okay";
 130                         gpios = <&gpio 33 0>;
 131                         lantiq,portmask = <0x3>;
 132                 };
 133
 134                 ifxhcd@E106000 {
 135                         status = "okay";
 136                         gpios = <&gpio 33 0>;
 137                 };
 138         };
 139
 140         gphy-xrx200 {
 141                 compatible = "lantiq,phy-xrx200";
 142                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 143                 phys = [ 00 01 ];
 144         };
 145
 146         pcie {
 147                 compatible = "lantiq,pcie-xway";
 148         };
 149
 150         ath9k_eep {
 151                 compatible = "ath9k,eeprom";
 152                 ath,eep-flash = <&ath9k_cal 0x21000>;
 153                 ath,mac-offset = <0xf100>;
 154                 ath,mac-increment;
 155                 ath,led-pin = <0>;
 156                 ath,disable-5ghz;
 157                 ath,led-active-high;
 158         };
 159
 160         gpio-keys-polled {
 161                 compatible = "gpio-keys-polled";
 162                 #address-cells = <1>;
 163                 #size-cells = <0>;
 164                 poll-interval = <100>;
 165                 reset {
 166                         label = "reset";
 167                         gpios = <&gpio 0 1>;
 168                         linux,code = <0x198>;
 169                 };
 170
 171                 wifi {
 172                         label = "wifi";
 173                         gpios = <&gpio 9 0>;
 174                         linux,code = <0xf7>;
 175                         linux,input-type = <5>; /* EV_SW */
 176                 };
 177
 178                 wps {
 179                         label = "wps";
 180                         gpios = <&gpio 39 1>;
 181                         linux,code = <0x211>;
 182                 };
 183         };
 184
 185         gpio-leds {
 186                 compatible = "gpio-leds";
 187                 /*
 188                         power is not controllable via gpio
 189         */
 190                 dsl: dsl {
 191                         label = "tdw89x0:green:dsl";
 192                         gpios = <&gpio 4 0>;
 193                 };
 194                 internet: internet {
 195                         label = "tdw89x0:green:internet";
 196                         gpios = <&gpio 5 0>;
 197                 };
 198                 usb0: usb0 {
 199                         label = "tdw89x0:green:usb";
 200                         gpios = <&gpio 19 0>;
 201                 };
 202                 usb2: usb2 {
 203                         label = "tdw89x0:green:usb2";
 204                         gpios = <&gpio 20 0>;
 205                 };
 206                 wps: wps {
 207                         label = "tdw89x0:green:wps";
 208                         gpios = <&gpio 37 0>;
 209                 };
 210         };
 211 };
 212
 213 &spi {
 214         status = "ok";
 215
 216         m25p80@3 {
 217                 #address-cells = <1>;
 218                 #size-cells = <1>;
 219                 compatible = "jedec,spi-nor";
 220                 reg = <3 0>;
 221                 spi-max-frequency = <33250000>;
 222                 m25p,fast-read;
 223
 224                 partition@0 {
 225                         reg = <0x0 0x20000>;
 226                         label = "u-boot";
 227                         read-only;
 228                 };
 229
 230                 partition@20000 {
 231                         reg = <0x20000 0x7a0000>;
 232                         label = "firmware";
 233                 };
 234
 235                 partition@7c0000 {
 236                         reg = <0x7c0000 0x10000>;
 237                         label = "config";
 238                         read-only;
 239                 };
 240
 241                 ath9k_cal: partition@7d0000 {
 242                         reg = <0x7d0000 0x30000>;
 243                         label = "boardconfig";
 244                         read-only;
 245                 };
 246         };
 247 };