5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
9 /* the power led can't be controlled, use the wps led instead */
14 led-internet = &internet;
20 reg = <0x0 0x4000000>;
24 compatible = "lantiq,cputemp";
28 gpio: pinmux@E100B10 {
29 pinctrl-names = "default";
30 pinctrl-0 = <&state_default>;
32 state_default: pinmux {
34 lantiq,groups = "mdio";
35 lantiq,function = "mdio";
38 lantiq,groups = "gphy0 led1", "gphy1 led1";
39 lantiq,function = "gphy";
41 lantiq,open-drain = <0>;
47 lantiq,open-drain = <0>;
56 pins_spi_default: pins_spi_default {
58 lantiq,groups = "spi_di";
59 lantiq,function = "spi";
62 lantiq,groups = "spi_do", "spi_clk",
64 lantiq,function = "spi";
72 gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
73 lantiq,portmask = <0x3>;
78 gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
83 compatible = "lantiq,phy-xrx200";
84 firmware = "lantiq/vr9_phy11g_a2x.bin";
89 compatible = "ath9k,eeprom";
90 ath,eep-flash = <&ath9k_cal 0x21000>;
91 ath,mac-offset = <0xf100>;
92 ath,mac-increment = <2>;
99 compatible = "gpio-keys-polled";
100 #address-cells = <1>;
102 poll-interval = <100>;
105 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
106 linux,code = <KEY_RESTART>;
111 gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
112 linux,code = <KEY_RFKILL>;
113 linux,input-type = <EV_SW>;
118 gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
119 linux,code = <KEY_WPS_BUTTON>;
124 compatible = "gpio-leds";
126 power is not controllable via gpio
129 label = "tdw89x0:green:dsl";
130 gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
133 label = "tdw89x0:green:internet";
134 gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
137 label = "tdw89x0:green:usb";
138 gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
141 label = "tdw89x0:green:usb2";
142 gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
145 label = "tdw89x0:green:wps";
146 gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
152 pinctrl-names = "default";
153 pinctrl-0 = <&pins_spi_default>;
158 #address-cells = <1>;
160 compatible = "jedec,spi-nor";
162 spi-max-frequency = <33250000>;
166 compatible = "fixed-partitions";
167 #address-cells = <1>;
177 reg = <0x20000 0x7a0000>;
182 reg = <0x7c0000 0x10000>;
187 ath9k_cal: partition@7d0000 {
188 reg = <0x7d0000 0x30000>;
189 label = "boardconfig";
198 compatible = "lantiq,xrx200-pdi";
199 #address-cells = <1>;
202 mtd-mac-address = <&ath9k_cal 0xf100>;
206 compatible = "lantiq,xrx200-pdi-port";
209 phy-handle = <&phy0>;
210 // gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
213 compatible = "lantiq,xrx200-pdi-port";
216 phy-handle = <&phy5>;
219 compatible = "lantiq,xrx200-pdi-port";
222 phy-handle = <&phy11>;
225 compatible = "lantiq,xrx200-pdi-port";
228 phy-handle = <&phy13>;
233 #address-cells = <1>;
235 compatible = "lantiq,xrx200-mdio";
236 phy0: ethernet-phy@0 {
238 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
240 phy5: ethernet-phy@5 {
242 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
244 phy11: ethernet-phy@11 {
246 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
248 phy13: ethernet-phy@13 {
250 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";