6 model = "TDW8970 - TP-LINK TD-W8970";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=jffs2";
13 reg = <0x0 0x4000000>;
17 gpio: pinmux@E100B10 {
18 pinctrl-names = "default";
19 pinctrl-0 = <&state_default>;
21 state_default: pinmux {
23 lantiq,groups = "mdio";
24 lantiq,function = "mdio";
29 lantiq,open-drain = <0>;
34 lantiq,open-drain = <1>;
38 lantiq,pins = "io10", "io17", "io18", "io21";
39 lantiq,open-drain = <0>;
53 compatible = "lantiq,xrx200-net";
54 reg = < 0xE108000 0x3000 /* switch */
55 0xE10B100 0x70 /* mdio */
56 0xE10B1D8 0x30 /* mii */
57 0xE10B308 0x30 /* pmac */
59 interrupt-parent = <&icu0>;
63 compatible = "lantiq,xrx200-pdi";
67 mac-address = [ 00 11 22 33 44 55 ];
70 compatible = "lantiq,xrx200-pdi-port";
74 // gpios = <&gpio 42 1>;
77 compatible = "lantiq,xrx200-pdi-port";
83 compatible = "lantiq,xrx200-pdi-port";
86 phy-handle = <&phy11>;
89 compatible = "lantiq,xrx200-pdi-port";
92 phy-handle = <&phy13>;
99 compatible = "lantiq,xrx200-mdio";
100 phy0: ethernet-phy@0 {
102 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
104 phy5: ethernet-phy@5 {
106 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
108 phy11: ethernet-phy@11 {
110 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
112 phy13: ethernet-phy@13 {
114 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
121 gpios = <&gpio 33 0>;
122 lantiq,portmask = <0x3>;
127 compatible = "lantiq,phy-xrx200";
128 firmware = "lantiq/vr9_phy11g_a2x.bin";
133 compatible = "lantiq,pcie-xway";
137 #address-cells = <1>;
140 compatible = "spi-gpio";
142 gpio-miso = <&gpio 16 0>;
143 gpio-mosi = <&gpio 17 0>;
144 gpio-sck = <&gpio 18 0>;
145 num-chipselects = <1>;
146 cs-gpios = <&gpio 10 1>;
149 #address-cells = <1>;
151 compatible = "en25q64", "m25p80";
153 linux,modalias = "en25q64";
154 spi-max-frequency = <1000000>;
163 reg = <0x20000 0x7a0000>;
168 reg = <0x7c0000 0x10000>;
173 ath9k_cal: partition@7d0000 {
174 reg = <0x7d0000 0x30000>;
175 label = "boardconfig";
182 compatible = "ath9k,eeprom";
183 ath,eep-flash = <&ath9k_cal 0x21000>;
188 compatible = "gpio-keys-polled";
189 #address-cells = <1>;
191 poll-interval = <100>;
195 linux,code = <0x100>;
201 linux,code = <0x101>;
202 linux,input-type = <5>; /* EV_SW */
207 gpios = <&gpio 39 1>;
208 linux,code = <0x102>;
213 compatible = "gpio-leds";
229 gpios = <&gpio 19 0>;
233 gpios = <&gpio 20 0>;
237 gpios = <&gpio 37 0>;
241 gpios = <&gpio 45 0>;