5 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
10 running = &power_green;
13 internet = &internet_green;
14 wifi = &wireless_green;
19 reg = <0x0 0x8000000>;
25 compatible = "lantiq,fpi", "simple-bus";
26 ranges = <0x0 0x10000000 0xEEFFFFF>;
27 reg = <0x10000000 0xEF00000>;
32 ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
33 1 0 0x4000000 0x4000010>; /* addsel1 */
34 compatible = "lantiq,localbus", "simple-bus";
37 gpio: pinmux@E100B10 {
38 compatible = "lantiq,pinctrl-xr9";
39 pinctrl-names = "default";
40 pinctrl-0 = <&state_default>;
42 interrupt-parent = <&icu0>;
43 interrupts = <166 135 66 40 41 42 38>;
47 reg = <0xE100B10 0xA0>;
49 state_default: pinmux {
51 lantiq,groups = "exin3";
52 lantiq,function = "exin";
55 lantiq,groups = "mdio";
56 lantiq,function = "mdio";
59 lantiq,groups = "gphy0 led1", "gphy1 led1",
60 "gphy0 led2", "gphy1 led2";
61 lantiq,function = "gphy";
63 lantiq,open-drain = <0>;
67 lantiq,groups = "stp";
68 lantiq,function = "stp";
70 lantiq,open-drain = <0>;
74 lantiq,groups = "req1";
75 lantiq,function = "pci";
77 lantiq,open-drain = <1>;
81 lantiq,groups = "gnt1";
82 lantiq,function = "pci";
84 lantiq,open-drain = <0>;
90 lantiq,open-drain = <0>;
101 lantiq,open-drain = <0>;
105 lantiq,groups = "nand cle", "nand ale";
106 lantiq,function = "ebu";
108 lantiq,open-drain = <0>;
112 lantiq,groups = "nand cs1";
113 lantiq,function = "ebu";
114 lantiq,open-drain = <0>;
121 compatible = "lantiq,gpio-stp-xway";
122 reg = <0xE100BB0 0x40>;
126 lantiq,shadow = <0xffffff>;
127 lantiq,groups = <0x7>;
135 gpios = <&gpio 33 0>;
136 lantiq,portmask = <0x3>;
141 gpios = <&gpio 33 0>;
146 #address-cells = <3>;
148 #interrupt-cells = <1>;
149 compatible = "lantiq,pci-xway";
150 bus-range = <0x0 0x0>;
151 ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
152 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
153 reg = <0x7000000 0x8000 /* config space */
154 0xE105400 0x400>; /* pci bridge */
155 lantiq,bus-clock = <33333333>;
156 /*lantiq,external-clock;*/
157 lantiq,delay-hi = <0>; /* 0ns delay */
158 lantiq,delay-lo = <0>; /* 0.0ns delay */
159 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
161 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
163 gpio-reset = <&gpio 21 0>;
164 req-mask = <0x1>; /* GNT1 */
169 compatible = "lantiq,phy-xrx200";
170 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
171 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
176 compatible = "gpio-keys-polled";
177 #address-cells = <1>;
179 poll-interval = <100>;
183 gpios = <&gpio 39 1>;
184 linux,code = <0x198>;
195 compatible = "gpio-leds";
198 label = "p2812hnufx:red:internet";
201 internet_green: internet_green {
202 label = "p2812hnufx:green:internet";
205 dsl_green: dsl_green {
206 label = "p2812hnufx:green:dsl";
210 label = "p2812hnufx:orange:dsl";
214 label = "p2812hnufx:orange:wlan";
217 wireless_green: wireless_green {
218 label = "p2812hnufx:green:wlan";
222 label = "p2812hnufx:red:power";
225 power_green: power2 {
226 label = "p2812hnufx:green:power";
228 default-state = "keep";
231 label = "p2812hnufx:green:phone";
232 gpios = <&gpio 11 1>;
235 label = "p2812hnufx:orange:phone";
236 gpios = <&gpio 12 1>;
239 label = "p2812hnufx:orange:phone2";
240 gpios = <&gpio 26 1>;
243 label = "p2812hnufx:green:phone2";
244 gpios = <&gpio 28 1>;
251 compatible = "lantiq,xrx200-pdi";
252 #address-cells = <1>;
255 mac-address = [ 00 11 22 33 44 55 ];
259 compatible = "lantiq,xrx200-pdi-port";
262 phy-handle = <&phy0>;
265 compatible = "lantiq,xrx200-pdi-port";
268 phy-handle = <&phy1>;
271 compatible = "lantiq,xrx200-pdi-port";
274 phy-handle = <&phy11>;
277 compatible = "lantiq,xrx200-pdi-port";
280 phy-handle = <&phy13>;
283 compatible = "lantiq,xrx200-pdi-port";
286 phy-handle = <&phy5>;
291 #address-cells = <1>;
293 compatible = "lantiq,xrx200-mdio";
295 phy0: ethernet-phy@0 {
297 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
299 phy1: ethernet-phy@1 {
301 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
303 phy5: ethernet-phy@5 {
305 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
307 phy11: ethernet-phy@11 {
309 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
311 phy13: ethernet-phy@13 {
313 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";