3 #include <dt-bindings/input/input.h>
7 bootargs = "console=ttyLTQ0,115200";
11 led-boot = &power_green;
12 led-failsafe = &power_red;
13 led-running = &power_green;
16 led-internet = &internet_green;
17 led-wifi = &wireless_green;
21 reg = <0x0 0x8000000>;
25 gpio: pinmux@E100B10 {
26 pinctrl-names = "default";
27 pinctrl-0 = <&state_default>;
29 state_default: pinmux {
31 lantiq,groups = "exin3";
32 lantiq,function = "exin";
35 lantiq,groups = "mdio";
36 lantiq,function = "mdio";
39 lantiq,groups = "gphy0 led1", "gphy1 led1",
40 "gphy0 led2", "gphy1 led2";
41 lantiq,function = "gphy";
43 lantiq,open-drain = <0>;
47 lantiq,groups = "stp";
48 lantiq,function = "stp";
50 lantiq,open-drain = <0>;
54 lantiq,groups = "req1";
55 lantiq,function = "pci";
57 lantiq,open-drain = <1>;
61 lantiq,groups = "gnt1";
62 lantiq,function = "pci";
64 lantiq,open-drain = <0>;
70 lantiq,open-drain = <0>;
81 lantiq,open-drain = <0>;
85 lantiq,groups = "nand cle", "nand ale";
86 lantiq,function = "ebu";
88 lantiq,open-drain = <0>;
92 lantiq,groups = "nand cs1";
93 lantiq,function = "ebu";
94 lantiq,open-drain = <0>;
101 compatible = "lantiq,gpio-stp-xway";
102 reg = <0xE100BB0 0x40>;
106 lantiq,shadow = <0xffffff>;
107 lantiq,groups = <0x7>;
115 gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
116 lantiq,portmask = <0x3>;
121 gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
126 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
131 compatible = "lantiq,phy-xrx200";
132 firmware1 = "lantiq/vr9_phy11g_a1x.bin"; /*VR9 1.1*/
133 firmware2 = "lantiq/vr9_phy11g_a2x.bin"; /*VR9 1.2*/
138 compatible = "gpio-keys-polled";
139 #address-cells = <1>;
141 poll-interval = <100>;
145 gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
146 linux,code = <KEY_RESTART>;
151 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
152 linux,code = <KEY_RFKILL>;
157 compatible = "gpio-leds";
160 label = "p2812hnufx:red:internet";
161 gpios = <&stp 16 GPIO_ACTIVE_LOW>;
163 internet_green: internet_green {
164 label = "p2812hnufx:green:internet";
165 gpios = <&stp 17 GPIO_ACTIVE_LOW>;
167 dsl_green: dsl_green {
168 label = "p2812hnufx:green:dsl";
169 gpios = <&stp 18 GPIO_ACTIVE_LOW>;
172 label = "p2812hnufx:orange:dsl";
173 gpios = <&stp 19 GPIO_ACTIVE_LOW>;
176 label = "p2812hnufx:orange:wlan";
177 gpios = <&stp 20 GPIO_ACTIVE_LOW>;
179 wireless_green: wireless_green {
180 label = "p2812hnufx:green:wlan";
181 gpios = <&stp 21 GPIO_ACTIVE_LOW>;
184 label = "p2812hnufx:red:power";
185 gpios = <&stp 22 GPIO_ACTIVE_LOW>;
187 power_green: power2 {
188 label = "p2812hnufx:green:power";
189 gpios = <&stp 23 GPIO_ACTIVE_LOW>;
190 default-state = "keep";
193 label = "p2812hnufx:green:phone";
194 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
197 label = "p2812hnufx:orange:phone";
198 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
201 label = "p2812hnufx:orange:phone2";
202 gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
205 label = "p2812hnufx:green:phone2";
206 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
213 compatible = "lantiq,xrx200-pdi";
214 #address-cells = <1>;
217 mac-address = [ 00 11 22 33 44 55 ];
221 compatible = "lantiq,xrx200-pdi-port";
224 phy-handle = <&phy0>;
227 compatible = "lantiq,xrx200-pdi-port";
230 phy-handle = <&phy1>;
233 compatible = "lantiq,xrx200-pdi-port";
236 phy-handle = <&phy11>;
239 compatible = "lantiq,xrx200-pdi-port";
242 phy-handle = <&phy13>;
245 compatible = "lantiq,xrx200-pdi-port";
248 phy-handle = <&phy5>;
253 #address-cells = <1>;
255 compatible = "lantiq,xrx200-mdio";
257 phy0: ethernet-phy@0 {
259 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
261 phy1: ethernet-phy@1 {
263 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
265 phy5: ethernet-phy@5 {
267 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
269 phy11: ethernet-phy@11 {
271 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
273 phy13: ethernet-phy@13 {
275 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";