target/linux/lantiq/dts/FRITZ7360SL.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "FRITZ7360SL - 1&1 HomeServer";
   9
  10         aliases {
  11                 led-boot = &power_green;
  12                 led-failsafe = &power_red;
  13                 led-running = &power_green;
  14
  15                 led-internet = &info_green;
  16                 led-wifi = &wifi;
  17         };
  18
  19         memory@0 {
  20                 reg = <0x0 0x8000000>;
  21         };
  22
  23         fpi@10000000 {
  24                 localbus@0 {
  25                         nor-boot@0 {
  26                                 compatible = "lantiq,nor";
  27                                 bank-width = <2>;
  28                                 reg = <0 0x0 0x1000000>;
  29                                 #address-cells = <1>;
  30                                 #size-cells = <1>;
  31                                 partitions {
  32                                         compatible = "fixed-partitions";
  33                                         #address-cells = <1>;
  34                                         #size-cells = <1>;
  35                                         urlader: partition@0 {
  36                                                 label = "urlader";
  37                                                 reg = <0x00000 0x20000>;
  38                                                 read-only;
  39                                         };
  40
  41                                         partition@20000 {
  42                                                 label = "firmware";
  43                                                 reg = <0x20000 0xf60000>;
  44                                         };
  45
  46                                         partition@f80000 {
  47                                                 label = "tffs (1)";
  48                                                 reg = <0xf80000 0x40000>;
  49                                                 read-only;
  50                                         };
  51
  52                                         partition@fc0000 {
  53                                                 label = "tffs (2)";
  54                                                 reg = <0xfc0000 0x40000>;
  55                                                 read-only;
  56                                         };
  57                                 };
  58                         };
  59                 };
  60
  61                 gpio: pinmux@E100B10 {
  62                         pinctrl-names = "default";
  63                         pinctrl-0 = <&state_default>;
  64
  65                         state_default: pinmux {
  66                                 mdio {
  67                                         lantiq,groups = "mdio";
  68                                         lantiq,function = "mdio";
  69                                 };
  70                                 phy-rst {
  71                                         lantiq,pins = "io37", "io44";
  72                                         lantiq,pull = <0>;
  73                                         lantiq,open-drain;
  74                                         lantiq,output = <1>;
  75                                 };
  76                                 pcie-rst {
  77                                         lantiq,pins = "io38";
  78                                         lantiq,pull = <0>;
  79                                         lantiq,output = <1>;
  80                                 };
  81                         };
  82                 };
  83
  84                 ifxhcd@E101000 {
  85                         status = "okay";
  86                         lantiq,portmask = <0x3>;
  87                 };
  88
  89                 ifxhcd@E106000 {
  90                         status = "okay";
  91                 };
  92         };
  93
  94         gphy-xrx200 {
  95                 compatible = "lantiq,phy-xrx200";
  96                 firmware = "lantiq/vr9_phy11g_a2x.bin";
  97                 phys = [ 00 01 ];
  98         };
  99
 100         gpio-keys-polled {
 101                 compatible = "gpio-keys-polled";
 102                 #address-cells = <1>;
 103                 #size-cells = <0>;
 104                 poll-interval = <100>;
 105                 dect {
 106                         label = "dect";
 107                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
 108                         linux,code = <KEY_PHONE>;
 109                 };
 110                 wifi {
 111                         label = "wifi";
 112                         gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 113                         linux,code = <KEY_WLAN>;
 114                 };
 115         };
 116
 117         gpio-leds {
 118                 compatible = "gpio-leds";
 119
 120                 power_green: power {
 121                         label = "fritz7360sl:green:power";
 122                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
 123                         default-state = "keep";
 124                 };
 125                 power_red: power2 {
 126                         label = "fritz7360sl:red:power";
 127                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
 128                 };
 129                 info_red {
 130                         label = "fritz7360sl:red:info";
 131                         gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
 132                 };
 133                 info_green: info_green {
 134                         label = "fritz7360sl:green:info";
 135                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 136                 };
 137                 wifi: wifi {
 138                         label = "fritz7360sl:green:wlan";
 139                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
 140                 };
 141                 dect {
 142                         label = "fritz7360sl:green:dect";
 143                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
 144                 };
 145         };
 146 };
 147
 148 &eth0 {
 149         lan: interface@0 {
 150                 compatible = "lantiq,xrx200-pdi";
 151                 #address-cells = <1>;
 152                 #size-cells = <0>;
 153                 reg = <0>;
 154                 mac-address = [ 00 11 22 33 44 55 ];
 155                 lantiq,switch;
 156
 157                 ethernet@0 {
 158                         compatible = "lantiq,xrx200-pdi-port";
 159                         reg = <0>;
 160                         phy-mode = "rmii";
 161                         phy-handle = <&phy0>;
 162                 };
 163                 ethernet@1 {
 164                         compatible = "lantiq,xrx200-pdi-port";
 165                         reg = <1>;
 166                         phy-mode = "rmii";
 167                         phy-handle = <&phy1>;
 168                 };
 169                 ethernet@2 {
 170                         compatible = "lantiq,xrx200-pdi-port";
 171                         reg = <2>;
 172                         phy-mode = "gmii";
 173                         phy-handle = <&phy11>;
 174                 };
 175                 ethernet@3 {
 176                         compatible = "lantiq,xrx200-pdi-port";
 177                         reg = <4>;
 178                         phy-mode = "gmii";
 179                         phy-handle = <&phy13>;
 180                 };
 181         };
 182
 183         mdio@0 {
 184                 #address-cells = <1>;
 185                 #size-cells = <0>;
 186                 compatible = "lantiq,xrx200-mdio";
 187                 phy0: ethernet-phy@0 {
 188                         reg = <0x00>;
 189                         compatible = "ethernet-phy-id004d.d076", "ethernet-phy-ieee802.3-c22";
 190                         reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
 191                 };
 192                 phy1: ethernet-phy@1 {
 193                         reg = <0x01>;
 194                         compatible = "ethernet-phy-id004d.d076", "ethernet-phy-ieee802.3-c22";
 195                         reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
 196                 };
 197                 phy11: ethernet-phy@11 {
 198                         reg = <0x11>;
 199                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 200                 };
 201                 phy13: ethernet-phy@13 {
 202                         reg = <0x13>;
 203                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 204                 };
 205         };
 206 };
 207
 208 &pcie0 {
 209         pcie@0 {
 210                 reg = <0 0 0 0 0>;
 211                 #interrupt-cells = <1>;
 212                 #size-cells = <2>;
 213                 #address-cells = <3>;
 214                 device_type = "pci";
 215
 216                 wifi@168c,002e {
 217                         compatible = "pci168c,002e";
 218                         reg = <0 0 0 0 0>;
 219                         qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */
 220                 };
 221         };
 222 };