6 model = "FRITZ3370 - Fritz!Box WLAN 3370";
9 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
13 reg = <0x0 0x8000000>;
19 compatible = "gen_nand", "lantiq,nand-xway";
21 reg = <1 0x0 0x2000000>;
32 reg = <0x400000 0x3000000>;
36 label = "vr9_firmware";
37 reg = <0x3400000 0x400000>;
41 reg = <0x3800000 0x3000000>;
45 reg = <0x6800000 0x200000>;
48 label = "nand-filesystem";
49 reg = <0x6a00000 0x1600000>;
54 gpio: pinmux@E100B10 {
55 pinctrl-names = "default";
56 pinctrl-0 = <&state_default>;
58 state_default: pinmux {
60 lantiq,groups = "spi", "spi_cs4";
61 lantiq,function = "gpio";
64 lantiq,groups = "mdio";
65 lantiq,function = "mdio";
68 lantiq,groups = "nand cle", "nand ale",
69 "nand rd", "nand cs1", "nand rdy";
70 lantiq,function = "ebu";
74 lantiq,pins = "io37", "io44";
76 lantiq,open-drain = <0>;
90 compatible = "lantiq,xrx200-net";
91 reg = < 0xE108000 0x3000 /* switch */
92 0xE10B100 0x70 /* mdio */
93 0xE10B1D8 0x30 /* mii */
94 0xE10B308 0x30 /* pmac */
96 interrupt-parent = <&icu0>;
100 compatible = "lantiq,xrx200-pdi";
101 #address-cells = <1>;
104 mac-address = [ 00 11 22 33 44 55 ];
108 compatible = "lantiq,xrx200-pdi-port";
111 phy-handle = <&phy0>;
112 gpios = <&gpio 37 0>;
115 compatible = "lantiq,xrx200-pdi-port";
118 phy-handle = <&phy1>;
119 gpios = <&gpio 44 0>;
122 compatible = "lantiq,xrx200-pdi-port";
125 phy-handle = <&phy11>;
128 compatible = "lantiq,xrx200-pdi-port";
131 phy-handle = <&phy13>;
136 #address-cells = <1>;
138 compatible = "lantiq,xrx200-mdio";
139 phy0: ethernet-phy@0 {
141 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
143 phy1: ethernet-phy@1 {
145 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
147 phy11: ethernet-phy@11 {
149 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
151 phy13: ethernet-phy@13 {
153 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
162 lantiq,portmask = <0x3>;
167 #address-cells = <1>;
170 compatible = "spi-gpio";
172 gpio-miso = <&gpio 16 0>;
173 gpio-mosi = <&gpio 17 0>;
174 gpio-sck = <&gpio 18 0>;
175 num-chipselects = <1>;
176 cs-gpios = <&gpio 10 1>;
179 #address-cells = <1>;
181 compatible = "jedec,spi-nor";
183 spi-max-frequency = <1000000>;
185 ath9k_cal: partition@0 {
192 reg = <0x20000 0x10000>;
198 reg = <0x30000 0x10000>;
206 compatible = "ath9k,eeprom";
207 ath,eep-flash = <&ath9k_cal 0x985>;
213 compatible = "lantiq,phy-xrx200";
214 firmware = "lantiq/vr9_phy11g_a1x.bin";
219 compatible = "gpio-keys-polled";
220 #address-cells = <1>;
222 poll-interval = <100>;
226 linux,code = <0x100>;
230 gpios = <&gpio 29 0>;
231 linux,code = <0x101>;
236 compatible = "gpio-leds";
240 gpios = <&gpio 32 1>;
244 gpios = <&gpio 33 1>;
248 gpios = <&gpio 34 1>;
252 gpios = <&gpio 35 1>;
256 gpios = <&gpio 36 1>;
260 gpios = <&gpio 38 1>;
263 label = "info_green";
264 gpios = <&gpio 47 1>;