target/linux/lantiq/dts/FRITZ3370.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "FRITZ3370 - Fritz!Box WLAN 3370";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_green;
  18
  19                 led-dsl = &dsl;
  20                 led-internet = &info_green;
  21                 led-wifi = &wifi;
  22         };
  23
  24         memory@0 {
  25                 reg = <0x0 0x8000000>;
  26         };
  27
  28         fpi@10000000 {
  29                 localbus@0 {
  30                         nand-parts@0 {
  31                                 compatible = "gen_nand", "lantiq,nand-xway";
  32                                 bank-width = <2>;
  33                                 reg = <1 0x0 0x2000000>;
  34                                 #address-cells = <1>;
  35                                 #size-cells = <1>;
  36
  37                                 partitions {
  38                                         compatible = "fixed-partitions";
  39                                         #address-cells = <1>;
  40                                         #size-cells = <1>;
  41
  42                                         partition@0 {
  43                                                 label = "kernel";
  44                                                 reg = <0x0 0x400000>;
  45                                         };
  46
  47                                         partition@400000 {
  48                                                 label = "rootfs_ubi";
  49                                                 reg = <0x400000 0x3000000>;
  50                                         };
  51
  52                                         partition@3400000 {
  53                                                 label = "vr9_firmware";
  54                                                 reg = <0x3400000 0x400000>;
  55                                         };
  56                                         partition@3800000 {
  57                                                 label = "reserved";
  58                                                 reg = <0x3800000 0x3000000>;
  59                                         };
  60                                         partition@6800000 {
  61                                                 label = "config";
  62                                                 reg = <0x6800000 0x200000>;
  63                                         };
  64                                         partition@6a00000 {
  65                                                 label = "nand-filesystem";
  66                                                 reg = <0x6a00000 0x1600000>;
  67                                         };
  68                                 };
  69                         };
  70                 };
  71
  72                 gpio: pinmux@E100B10 {
  73                         pinctrl-names = "default";
  74                         pinctrl-0 = <&state_default>;
  75
  76                         state_default: pinmux {
  77                                 mdio {
  78                                         lantiq,groups = "mdio";
  79                                         lantiq,function = "mdio";
  80                                 };
  81                                 nand {
  82                                         lantiq,groups = "nand cle", "nand ale",
  83                                                         "nand rd", "nand cs1", "nand rdy";
  84                                         lantiq,function = "ebu";
  85                                         lantiq,pull = <1>;
  86                                 };
  87                                 phy-rst {
  88                                         lantiq,pins = "io37", "io44";
  89                                         lantiq,pull = <0>;
  90                                         lantiq,open-drain = <0>;
  91                                         lantiq,output = <1>;
  92                                 };
  93                                 pcie-rst {
  94                                         lantiq,pins = "io38";
  95                                         lantiq,pull = <0>;
  96                                         lantiq,output = <1>;
  97                                 };
  98                         };
  99                         pins_spi_default: pins_spi_default {
 100                                 spi_in {
 101                                         lantiq,groups = "spi_di";
 102                                         lantiq,function = "spi";
 103                                 };
 104                                 spi_out {
 105                                         lantiq,groups = "spi_do", "spi_clk",
 106                                                 "spi_cs4";
 107                                         lantiq,function = "spi";
 108                                         lantiq,output = <1>;
 109                                 };
 110                         };
 111                 };
 112
 113                 ifxhcd@E101000 {
 114                         status = "okay";
 115                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH
 116                                 &gpio 14 GPIO_ACTIVE_HIGH>;
 117                         lantiq,portmask = <0x3>;
 118                 };
 119         };
 120
 121         ath9k_eep {
 122                 compatible = "ath9k,eeprom";
 123                 ath,eep-flash = <&ath9k_cal 0x985>;
 124                 ath,eep-endian;
 125                 ath,eep-swap;
 126         };
 127
 128         gphy-xrx200 {
 129                 compatible = "lantiq,phy-xrx200";
 130                 firmware = "lantiq/vr9_phy11g_a1x.bin";
 131                 phys = [ 00 01 ];
 132         };
 133
 134         gpio-keys-polled {
 135                 compatible = "gpio-keys-polled";
 136                 #address-cells = <1>;
 137                 #size-cells = <0>;
 138                 poll-interval = <100>;
 139                 power {
 140                         label = "power";
 141                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
 142                         linux,code = <KEY_POWER>;
 143                 };
 144 /*              wifi {
 145                         label = "wifi";
 146                         gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 147                         linux,code = <BTN_1>;
 148                 };*/
 149         };
 150
 151         gpio-leds {
 152                 compatible = "gpio-leds";
 153
 154                 power_green: power {
 155                         label = "fritz3370:green:power";
 156                         gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
 157                         default-state = "keep";
 158                 };
 159                 power_red: power2 {
 160                         label = "fritz3370:red:power";
 161                         gpios = <&gpio 33 GPIO_ACTIVE_LOW>;
 162                 };
 163                 info_red {
 164                         label = "fritz3370:red:info";
 165                         gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
 166                 };
 167                 wifi: wifi {
 168                         label = "fritz3370:green:wlan";
 169                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
 170                 };
 171                 dsl: dsl {
 172                         label = "fritz3370:green:dsl";
 173                         gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
 174                 };
 175                 lan {
 176                         label = "fritz3370:green:lan";
 177                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
 178                 };
 179                 info_green: info_green {
 180                         label = "fritz3370:green:info";
 181                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 182                 };
 183         };
 184 };
 185
 186 &spi {
 187         pinctrl-names = "default";
 188         pinctrl-0 = <&pins_spi_default>;
 189
 190         status = "ok";
 191
 192         m25p80@4 {
 193                 #address-cells = <1>;
 194                 #size-cells = <1>;
 195                 compatible = "jedec,spi-nor";
 196                 reg = <4 0>;
 197                 spi-max-frequency = <1000000>;
 198
 199                 ath9k_cal: partition@0 {
 200                         reg = <0x0 0x20000>;
 201                         label = "urlader";
 202                         read-only;
 203                 };
 204
 205                 partition@20000 {
 206                         reg = <0x20000 0x10000>;
 207                         label = "tffs (1)";
 208                         read-only;
 209                 };
 210
 211                 partition@30000 {
 212                         reg = <0x30000 0x10000>;
 213                         label = "tffs (2)";
 214                         read-only;
 215                 };
 216         };
 217 };
 218
 219 &eth0 {
 220         lan: interface@0 {
 221                 compatible = "lantiq,xrx200-pdi";
 222                 #address-cells = <1>;
 223                 #size-cells = <0>;
 224                 reg = <0>;
 225                 mac-address = [ 00 11 22 33 44 55 ];
 226                 lantiq,switch;
 227
 228                 ethernet@0 {
 229                         compatible = "lantiq,xrx200-pdi-port";
 230                         reg = <0>;
 231                         phy-mode = "rgmii";
 232                         phy-handle = <&phy0>;
 233                         gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
 234                 };
 235                 ethernet@1 {
 236                         compatible = "lantiq,xrx200-pdi-port";
 237                         reg = <1>;
 238                         phy-mode = "rgmii";
 239                         phy-handle = <&phy1>;
 240                         gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
 241                 };
 242                 ethernet@2 {
 243                         compatible = "lantiq,xrx200-pdi-port";
 244                         reg = <2>;
 245                         phy-mode = "gmii";
 246                         phy-handle = <&phy11>;
 247                 };
 248                 ethernet@3 {
 249                         compatible = "lantiq,xrx200-pdi-port";
 250                         reg = <4>;
 251                         phy-mode = "gmii";
 252                         phy-handle = <&phy13>;
 253                 };
 254         };
 255
 256         mdio@0 {
 257                 #address-cells = <1>;
 258                 #size-cells = <0>;
 259                 compatible = "lantiq,xrx200-mdio";
 260                 phy0: ethernet-phy@0 {
 261                         reg = <0x0>;
 262                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 263                 };
 264                 phy1: ethernet-phy@1 {
 265                         reg = <0x1>;
 266                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 267                 };
 268                 phy11: ethernet-phy@11 {
 269                         reg = <0x11>;
 270                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 271                 };
 272                 phy13: ethernet-phy@13 {
 273                         reg = <0x13>;
 274                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 275                 };
 276         };
 277 };